2009-04-01 Stefan Jahn <stefan@lkcc.org>

* rlcg.cpp (RLCG): Added new transmission line defined by RLCG
        loads.


git-svn-id: https://qucs.svn.sourceforge.net/svnroot/qucs/trunk@1679 b5b04e8c-4942-46c9-ab4f-83783d557d1c

NEWS

@@ -38,7 +38,7 @@ Version 0.0.15
  * Czech translation of the internal help system
  * new components: EPFL-EKV NMOS/PMOS V2.6, rectangular waveguide,
    HICUM L0 v1.2, HICUM L2 v3.23, photodiode, digital buffer, microstrip
-   radial stub, phototransistor
+   radial stub, phototransistor, RLCG transmission line
  * new libraries added: PMOSFETs, NMOSFETs, Regulators, Varistors and
    Ideal
 

qucs/components/ChangeLog

@@ -1,3 +1,8 @@
+2009-04-01  Stefan Jahn  <stefan@lkcc.org>
+
+	* rlcg.cpp (RLCG): Added new transmission line defined by RLCG
+	loads.
+
 2009-03-29  Stefan Jahn  <stefan@lkcc.org>
 
 	* relais.cpp (Relais): Added marks to visualize input voltage

qucs/components/Makefile.am

@@ -45,7 +45,7 @@ libcomponents_a_SOURCES = phaseshifter.cpp gyrator.cpp componentdialog.cpp    \
   logical_xnor.cpp logical_inv.cpp digi_sim.cpp digi_source.cpp coupler.cpp   \
   rs_flipflop.cpp d_flipflop.cpp jk_flipflop.cpp coaxialline.cpp vprobe.cpp   \
   switch.cpp relais.cpp am_modulator.cpp pm_modulator.cpp opt_sim.cpp         \
-  optimizedialog.cpp tline_4port.cpp twistedpair.cpp bondwire.cpp             \
+  optimizedialog.cpp tline_4port.cpp twistedpair.cpp bondwire.cpp rlcg.cpp    \
   hicumL2V2p1.cpp HBT_X.cpp verilogfile.cpp vexp.cpp iexp.cpp eqndefined.cpp  \
   vfile.cpp ifile.cpp mod_amp.cpp hic2_full.cpp thyristor.cpp triac.cpp       \
   diac.cpp log_amp.cpp hic0_full.cpp potentiometer.cpp rfedd.cpp rfedd2p.cpp  \
@@ -78,7 +78,7 @@ noinst_HEADERS = $(MOCHEADERS) resistor.h components.h capacitor.h vccs.h     \
   twistedpair.h bondwire.h hicumL2V2p1.h HBT_X.h verilogfile.h vexp.h iexp.h  \
   eqndefined.h vfile.h ifile.h mod_amp.h hic2_full.h thyristor.h triac.h      \
   diac.h log_amp.h hic0_full.h potentiometer.h rfedd.h rfedd2p.h MESFET.h     \
-  rectline.h hicumL0V1p2.h hicumL2V2p23.h photodiode.h EKV26MOS.h             \
+  rectline.h hicumL0V1p2.h hicumL2V2p23.h photodiode.h EKV26MOS.h rlcg.h      \
   logical_buf.h dff_SR.h jkff_SR.h tff_SR.h gatedDlatch.h logic_0.h logic_1.h \
   mux2to1.h mux4to1.h mux8to1.h DLS_nto1.h DLS_1ton.h andor4x2.h andor4x3.h   \
   andor4x4.h dmux2to4.h dmux3to8.h dmux4to16.h ha1b.h fa1b.h fa2b.h pad2bit.h \

qucs/components/component.cpp

@@ -1463,6 +1463,7 @@ Component* getComponentFromName(QString& Line)
 	else if(cstr == "elais") c = new Relais();
 	else if(cstr == "FEDD") c = new RFedd();
 	else if(cstr == "FEDD2P") c = new RFedd2P();
+	else if(cstr == "LCG") c = new RLCG();
 	break;
   case 'C' : if(cstr.isEmpty()) c = new Capacitor();
 	else if(cstr == "CCS") c = new CCCS();

qucs/components/components.h

@@ -60,6 +60,7 @@
 #include "twistedpair.h"
 #include "coaxialline.h"
 #include "rectline.h"
+#include "rlcg.h"
 #include "substrate.h"
 #include "msline.h"
 #include "mscoupled.h"

qucs/components/libcomponents.ap

@@ -42,7 +42,7 @@ SOURCES = phaseshifter.cpp gyrator.cpp componentdialog.cpp    \
   logical_xnor.cpp logical_inv.cpp digi_sim.cpp digi_source.cpp coupler.cpp   \
   rs_flipflop.cpp d_flipflop.cpp jk_flipflop.cpp coaxialline.cpp vprobe.cpp   \
   switch.cpp relais.cpp am_modulator.cpp pm_modulator.cpp opt_sim.cpp         \
-  optimizedialog.cpp tline_4port.cpp twistedpair.cpp bondwire.cpp             \
+  optimizedialog.cpp tline_4port.cpp twistedpair.cpp bondwire.cpp rlcg.cpp    \
   hicumL2V2p1.cpp HBT_X.cpp verilogfile.cpp vexp.cpp iexp.cpp eqndefined.cpp  \
   vfile.cpp ifile.cpp mod_amp.cpp hic2_full.cpp thyristor.cpp triac.cpp       \
   diac.cpp log_amp.cpp hic0_full.cpp potentiometer.cpp rfedd.cpp rfedd2p.cpp  \

qucs/components/rlcg.cpp

@@ -0,0 +1,84 @@
+/***************************************************************************
+                                rlcg.cpp
+                               ----------
+    begin                : Wed Apr 1 2009
+    copyright            : (C) 2009 by Stefan Jahn
+    email                : stefan@lkcc.org
+ ***************************************************************************/
+
+/***************************************************************************
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ ***************************************************************************/
+
+#include "main.h"
+#include "rlcg.h"
+
+RLCG::RLCG()
+{
+  Description = QObject::tr("RLCG transmission line");
+
+  Lines.append(new Line(-30,  0, 30,  0,QPen(QPen::darkBlue,2)));
+  Lines.append(new Line(-28,  7, 28,  7,QPen(QPen::darkBlue,2)));
+
+  Lines.append(new Line(-28, 14,-21,  7,QPen(QPen::darkBlue,2)));
+  Lines.append(new Line(-21, 14,-14,  7,QPen(QPen::darkBlue,2)));
+  Lines.append(new Line(-14, 14, -7,  7,QPen(QPen::darkBlue,2)));
+  Lines.append(new Line( -7, 14,  0,  7,QPen(QPen::darkBlue,2)));
+  Lines.append(new Line(  0, 14,  7,  7,QPen(QPen::darkBlue,2)));
+  Lines.append(new Line(  7, 14, 14,  7,QPen(QPen::darkBlue,2)));
+  Lines.append(new Line( 14, 14, 21,  7,QPen(QPen::darkBlue,2)));
+  Lines.append(new Line( 21, 14, 28,  7,QPen(QPen::darkBlue,2)));
+
+  QFontMetrics  metrics(QucsSettings.font);
+  int fHeight = metrics.lineSpacing();
+  QString tmp = QObject::tr("RLCG");
+  int w = metrics.width(tmp);
+  Texts.append(new Text(w/-2, -fHeight, tmp));
+
+  Ports.append(new Port(-30, 0));
+  Ports.append(new Port( 30, 0));
+
+  x1 = -30; y1 = -fHeight;
+  x2 =  30; y2 = 16;
+
+  tx = x1+4;
+  ty = y2+4;
+  Model = "RLCG";
+  Name  = "Line";
+
+  Props.append(new Property("R", "0.0", false,
+		QObject::tr("resistive load")+" ("+QObject::tr ("Ohm/m")+")"));
+  Props.append(new Property("L", "0.6e-6", true,
+		QObject::tr("inductive load")+" ("+QObject::tr ("H/m")+")"));
+  Props.append(new Property("C", "240e-12", true,
+		QObject::tr("capacitive load")+" ("+QObject::tr ("F/m")+")"));
+  Props.append(new Property("G", "0.0", false,
+		QObject::tr("conductive load")+" ("+QObject::tr ("S/m")+")"));
+  Props.append(new Property("Length", "1 mm", true,
+		QObject::tr("electrical length of the line")));
+  Props.append(new Property("Temp", "26.85", false,
+		QObject::tr("simulation temperature in degree Celsius")));
+}
+
+RLCG::~RLCG()
+{
+}
+
+Component* RLCG::newOne()
+{
+  return new RLCG();
+}
+
+Element* RLCG::info(QString& Name, char* &BitmapFile, bool getNewOne)
+{
+  Name = QObject::tr("RLCG Transmission Line");
+  BitmapFile = (char *) "tline";
+
+  if(getNewOne)  return new RLCG();
+  return 0;
+}

qucs/components/rlcg.h

@@ -0,0 +1,31 @@
+/***************************************************************************
+                          rlcg.cpp  -  description
+                         --------------------------
+    begin                : Wed Apr 1 2009
+    copyright            : (C) 2009 by Stefan Jahn
+    email                : stefan@lkcc.org
+ ***************************************************************************/
+
+/***************************************************************************
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ ***************************************************************************/
+
+#ifndef RLCG_H
+#define RLCG_H
+
+#include "component.h"
+
+class RLCG : public Component  {
+public:
+  RLCG();
+  ~RLCG();
+  Component* newOne();
+  static Element* info(QString&, char* &, bool getNewOne=false);
+};
+
+#endif

qucs/qucs.cpp

@@ -331,7 +331,7 @@ pInfoFunc Probes[] =
 
 pInfoFunc TransmissionLines[] =
   {&TLine::info, &TLine_4Port::info, &TwistedPair::info, &CoaxialLine::info,
-   &RectLine::info,
+   &RectLine::info, &RLCG::info,
    &Substrate::info, &MSline::info, &MScoupled::info, &MScorner::info,
    &MSmbend::info, &MSstep::info, &MStee::info, &MScross::info, &MSopen::info,
    &MSgap::info, &MSvia::info, &MSrstub::info, &Coplanar::info, &CPWopen::info,

qucs/qucs_ar.ts

@@ -6631,6 +6631,46 @@ Usage:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsApp</name>

qucs/qucs_ca.ts

@@ -6952,6 +6952,46 @@ Use:  qucsedit [-r] fitxer
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_cs.ts

@@ -7174,6 +7174,46 @@ Použití:  qucsedit [-r] soubor
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_de.ts

@@ -7230,6 +7230,46 @@ Verwendung:  qucsedit [-r] Datei
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_es.ts

@@ -6976,6 +6976,46 @@ Use:  qucsedit [-r] archivo
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_fr.ts

@@ -6980,6 +6980,46 @@ Invocation :  qucsedit [-r] fichier
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_he.ts

@@ -6807,6 +6807,46 @@ Usage:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_hu.ts

@@ -6950,6 +6950,46 @@ Digitális szimuláció</translation>
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_it.ts

@@ -7125,6 +7125,46 @@ Usage:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_jp.ts

@@ -6906,6 +6906,46 @@ Usage:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_pl.ts

@@ -7012,6 +7012,46 @@ Stosowanie:  qucsedit [-r] plik
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_pt.ts

@@ -6815,6 +6815,46 @@ Usage:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsApp</name>

qucs/qucs_ro.ts

@@ -6891,6 +6891,46 @@ Folosire:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_ru.ts

@@ -7221,6 +7221,46 @@ Usage:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_sv.ts

@@ -6772,6 +6772,46 @@ Usage:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_tr.ts

@@ -6815,6 +6815,46 @@ Kullanım:  qucsedit [-r] kütük
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsActions</name>

qucs/qucs_uk.ts

@@ -6810,6 +6810,46 @@ Usage:  qucsedit [-r] file
         <source>Phototransistor</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>RLCG transmission line</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>resistive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Ohm/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>inductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>H/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>capacitive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>conductive load</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>S/m</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>RLCG Transmission Line</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QucsApp</name>