qucs_s/translations/qucs_cs.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0">
<context>
    <name>ArrowDialog</name>
    <message>
        <location filename="paintings/arrowdialog.cpp" line="+34"/>
        <source>Edit Arrow Properties</source>
        <translation>změnit vlastnosti šipky</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Head Length: </source>
        <translation>délka šipky: </translation>
    </message>
    <message>
        <location line="+7"/>
        <source>      Head Width: </source>
        <translation>šířka šipky: </translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Line color: </source>
        <translation>barva linky: </translation>
    </message>
    <message>
        <location line="+6"/>
        <source>      Line Width: </source>
        <translation>šířka linky: </translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Line style: </source>
        <translation>styl šipkyLinienstil: </translation>
    </message>
    <message>
        <location line="+2"/>
        <source>solid line</source>
        <translation>plná linka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash line</source>
        <translation>přerušovaná šipka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dot line</source>
        <translation>tečkovaná linka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot line</source>
        <translation>čárka-tečka-linka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot dot line</source>
        <translation>čárka-tečka-tečka linka</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>OK</source>
        <translation>převzít</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>zrušit</translation>
    </message>
    <message>
        <location line="-14"/>
        <source>Arrow head: </source>
        <translation>špička šipky:</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>two lines</source>
        <translation>dvě linky</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>filled</source>
        <translation>plná linka</translation>
    </message>
</context>
<context>
    <name>ChangeDialog</name>
    <message>
        <location filename="dialogs/changedialog.cpp" line="+42"/>
        <source>Change Component Properties</source>
        <translation>Změnit vlastnosti komponent</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Components:</source>
        <translation>komponenty:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Component Names:</source>
        <translation>jména Komponent:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Property Name:</source>
        <translation>Jméno vlastnosti:</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>New Value:</source>
        <translation>Nová hodnota:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Replace</source>
        <translation>nahradit</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+70"/>
        <source>Cancel</source>
        <translation>zrušit</translation>
    </message>
    <message>
        <location line="-103"/>
        <source>all components</source>
        <translation>všechny komponenty</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>resistors</source>
        <translation>odpory</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>capacitors</source>
        <translation>kondenzátory</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>transistors</source>
        <translation>transistory</translation>
    </message>
    <message>
        <location line="+74"/>
        <source>Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Regular expression for component name is invalid.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Found Components</source>
        <translation>nalezeny komponenty</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Change properties of
</source>
        <translation>změnit vlastnosti těchto
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>these components ?</source>
        <translation>komponent ?</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Yes</source>
        <translation>Ano</translation>
    </message>
    <message>
        <location line="-99"/>
        <source>inductors</source>
        <translation>Cívky</translation>
    </message>
    <message>
        <source>No match found!</source>
        <translation type="obsolete">Nenalezeny žádné shodnosti!</translation>
    </message>
</context>
<context>
    <name>CloseMessageBox</name>
    <message>
        <source>Save</source>
        <translation type="obsolete">uložit</translation>
    </message>
    <message>
        <source>Save all</source>
        <translation type="obsolete">uložit vše</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation type="obsolete">neukládat</translation>
    </message>
    <message>
        <source>Discard all</source>
        <translation type="obsolete">neukládat nic</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">zrušit</translation>
    </message>
</context>
<context>
    <name>ComponentDialog</name>
    <message>
        <location filename="components/componentdialog.cpp" line="+43"/>
        <source>Edit Component Properties</source>
        <translation>Změnit vlastnosti komponent</translation>
    </message>
    <message>
        <location line="+280"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Apply</source>
        <translation>převzít</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>zrušit</translation>
    </message>
    <message>
        <location line="-63"/>
        <source>Name</source>
        <translation>jméno</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Value</source>
        <translation>hodnota</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>display</source>
        <translation>zobrazit</translation>
    </message>
    <message>
        <location line="+34"/>
        <source>Browse</source>
        <translation>prohledat</translation>
    </message>
    <message>
        <location line="-218"/>
        <location line="+8"/>
        <location line="+29"/>
        <location line="+9"/>
        <location line="+9"/>
        <location line="+9"/>
        <location line="+16"/>
        <location line="+94"/>
        <location line="+49"/>
        <source>display in schematic</source>
        <translation>zobrazit ve schématu</translation>
    </message>
    <message>
        <source>All Files (*.*)</source>
        <translation type="obsolete">všechny soubory (*.*)</translation>
    </message>
    <message>
        <location line="+451"/>
        <source>Select a file</source>
        <translation>vyber soubor</translation>
    </message>
    <message>
        <location line="-412"/>
        <location line="+31"/>
        <location line="+150"/>
        <location line="+177"/>
        <location line="+97"/>
        <source>yes</source>
        <translation>ano</translation>
    </message>
    <message>
        <location line="-454"/>
        <location line="+181"/>
        <location line="+272"/>
        <source>no</source>
        <translation>ne</translation>
    </message>
    <message>
        <location line="-486"/>
        <source>Add</source>
        <translation>přidat</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Remove</source>
        <translation>odebrat</translation>
    </message>
    <message>
        <location line="-47"/>
        <source>Description</source>
        <translation>popis</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Edit</source>
        <translation>upravit</translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="obsolete">chyba</translation>
    </message>
    <message>
        <source>Cannot start text editor!</source>
        <translation type="obsolete">textový editor nemůže být spuštěn!</translation>
    </message>
    <message>
        <location line="-45"/>
        <source>Name:</source>
        <translation>jméno:</translation>
    </message>
    <message>
        <location line="+507"/>
        <source>All Files</source>
        <translation>všechny soubory</translation>
    </message>
    <message>
        <location line="-685"/>
        <source>Sweep</source>
        <translation>Sweep</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Simulation:</source>
        <translation>simulace:</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Sweep Parameter:</source>
        <translation>Sweep parametr:</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Type:</source>
        <translation>typ:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>linear</source>
        <translation>lineární</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>logarithmic</source>
        <translation>logaritmický</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>list</source>
        <translation>seznam</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>constant</source>
        <translation>konstanta</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Values:</source>
        <translation>hodnoty:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Start:</source>
        <translation>Spustit:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Stop:</source>
        <translation>zastavit:</translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+706"/>
        <location line="+22"/>
        <source>Step:</source>
        <translation>délka kroku:</translation>
    </message>
    <message>
        <location line="-721"/>
        <source>Number:</source>
        <translation>počet:</translation>
    </message>
    <message>
        <location line="+79"/>
        <location line="+24"/>
        <source>Properties</source>
        <translation>Vlastnosti</translation>
    </message>
    <message>
        <location line="+594"/>
        <source>Points per decade:</source>
        <translation>bodů na dekádu:</translation>
    </message>
    <message>
        <location line="-94"/>
        <source>Touchstone files</source>
        <translation>Touchstone soubory</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>SPICE files</source>
        <translation>SPICE soubory</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>VHDL files</source>
        <translation>VHDL soubory</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Verilog files</source>
        <translation>Verilog soubory</translation>
    </message>
    <message>
        <location line="-3"/>
        <source>CSV files</source>
        <translation>CSV soubory</translation>
    </message>
</context>
<context>
    <name>DiagramDialog</name>
    <message>
        <location filename="diagrams/diagramdialog.cpp" line="+110"/>
        <source>Edit Diagram Properties</source>
        <translation type="unfinished">Upravit vlastnosti diagramu</translation>
    </message>
    <message>
        <location line="+53"/>
        <source>Graph Input</source>
        <translation>hodnoty pro křivku</translation>
    </message>
    <message>
        <location line="+36"/>
        <source>Color:</source>
        <translation>Barva:</translation>
    </message>
    <message>
        <source>       Thickness:</source>
        <translation type="obsolete">tloušťka:</translation>
    </message>
    <message>
        <location line="+72"/>
        <source>Dataset</source>
        <translation>datová sada</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Name</source>
        <translation>jméno</translation>
    </message>
    <message>
        <source>Status</source>
        <translation type="obsolete">status</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Size</source>
        <translation>velikost</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Graph</source>
        <translation>graf</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>New Graph</source>
        <translation>nový graf</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Delete Graph</source>
        <translation>smazat křivku</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Data</source>
        <translation>data</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>x-Axis Label:</source>
        <translation>označění x-osy:</translation>
    </message>
    <message>
        <source>y-Axis Label:</source>
        <translation type="obsolete">označení y-osy:</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>show Grid</source>
        <translation>ukázat síť bodů</translation>
    </message>
    <message>
        <location line="+128"/>
        <source>Properties</source>
        <translation>vlastnosti</translation>
    </message>
    <message>
        <location line="+186"/>
        <source>OK</source>
        <translation>hotovo</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Apply</source>
        <translation>převzít</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>zrušit</translation>
    </message>
    <message>
        <source>Function Help</source>
        <translation type="obsolete">funkce nápovědy</translation>
    </message>
    <message>
        <location line="-490"/>
        <source>Number Notation: </source>
        <translation>formát číslic:</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>real/imaginary</source>
        <translation>realná a imaginární část</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>magnitude/angle (degree)</source>
        <translation>Amplituda/úhel (ve stupních)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>magnitude/angle (radian)</source>
        <translation>amplituda/fáze (v radiánech)</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Precision:</source>
        <translation>přesnost:</translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Thickness:</source>
        <translation>tloušťka:</translation>
    </message>
    <message>
        <location line="-18"/>
        <source>Style:</source>
        <translation>styl:</translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+150"/>
        <source>solid line</source>
        <translation>plná čára</translation>
    </message>
    <message>
        <location line="-149"/>
        <location line="+150"/>
        <source>dash line</source>
        <translation>čárkovaná čára</translation>
    </message>
    <message>
        <location line="-149"/>
        <location line="+150"/>
        <source>dot line</source>
        <translation>tečkovaná čára</translation>
    </message>
    <message>
        <location line="-13"/>
        <source>Grid Color:</source>
        <translation>barva sítě:</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Grid Style: </source>
        <translation>styl sítě bodů:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>dash dot line</source>
        <translation>čárka-tečka linka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot dot line</source>
        <translation>čárka-tečka-tečka linka</translation>
    </message>
    <message>
        <location line="-150"/>
        <source>long dash line</source>
        <translation>dlouze čárkovaná linka</translation>
    </message>
    <message>
        <location line="+171"/>
        <source>logarithmical X Axis Grid</source>
        <translation>logaritmicky dělěná x-ová osa</translation>
    </message>
    <message>
        <source>logarithmical Y Axis Grid</source>
        <translation type="obsolete">logarithmicky dělená y-ová osa</translation>
    </message>
    <message>
        <location line="-145"/>
        <source>y-Axis:</source>
        <translation>y-osa:</translation>
    </message>
    <message>
        <location line="-121"/>
        <source>left Axis</source>
        <translation>levá osa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>right Axis</source>
        <translation>pravá osa</translation>
    </message>
    <message>
        <source>left y-Axis Label:</source>
        <translation type="obsolete">označení levé y-osy:</translation>
    </message>
    <message>
        <source>right y-Axis Label:</source>
        <translation type="obsolete">označení pravé y-osy:</translation>
    </message>
    <message>
        <source>logarithmical left Y Axis Grid</source>
        <translation type="obsolete">logaritmické dělení y-osy vlevo</translation>
    </message>
    <message>
        <source>logarithmical right Y Axis Grid</source>
        <translation type="obsolete">logaritmické dělení y-osy vpravo</translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+5"/>
        <source>smith Axis</source>
        <translation>Smith-osa</translation>
    </message>
    <message>
        <location line="-4"/>
        <location line="+3"/>
        <source>polar Axis</source>
        <translation>polární osa</translation>
    </message>
    <message>
        <location line="+346"/>
        <source>x-Axis</source>
        <translation>x-osa</translation>
    </message>
    <message>
        <location line="+8"/>
        <location line="+42"/>
        <location line="+44"/>
        <source>manual</source>
        <translation>uživatelsky zvolená</translation>
    </message>
    <message>
        <source>left y-Axis</source>
        <translation type="obsolete">levá y-osa</translation>
    </message>
    <message>
        <source>right y-Axis</source>
        <translation type="obsolete">pravá y-osa</translation>
    </message>
    <message>
        <location line="+39"/>
        <source>Limits</source>
        <translation>Omezení</translation>
    </message>
    <message>
        <location line="-117"/>
        <location line="+42"/>
        <location line="+44"/>
        <source>start</source>
        <translation>začít od</translation>
    </message>
    <message>
        <location line="-77"/>
        <location line="+44"/>
        <location line="+43"/>
        <source>step</source>
        <translation>krok</translation>
    </message>
    <message>
        <location line="-78"/>
        <location line="+44"/>
        <location line="+43"/>
        <source>stop</source>
        <translation>ukončit</translation>
    </message>
    <message>
        <source>Smith Axis</source>
        <translation type="obsolete">Smith-osa</translation>
    </message>
    <message>
        <source>Polar Axis</source>
        <translation type="obsolete">polární osa</translation>
    </message>
    <message>
        <location line="-53"/>
        <location line="+43"/>
        <source>number</source>
        <translation>počet</translation>
    </message>
    <message>
        <location line="-375"/>
        <source>stars</source>
        <translation>hvězdičky</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>circles</source>
        <translation>kolečka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>arrows</source>
        <translation>šipky</translation>
    </message>
    <message>
        <location line="+208"/>
        <source>Rotation around y-Axis:</source>
        <translation>otočení kolem y-osy:</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Rotation around z-Axis:</source>
        <translation>otočení kolem z-osy:</translation>
    </message>
    <message>
        <location line="-32"/>
        <source>Rotation around x-Axis:</source>
        <translation>posunutí po x-ose:</translation>
    </message>
    <message>
        <location line="-286"/>
        <location line="+3"/>
        <location line="+11"/>
        <source>y-Axis</source>
        <translation>y-osa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>z-Axis</source>
        <translation>z-osa</translation>
    </message>
    <message>
        <location line="+186"/>
        <location line="+8"/>
        <source>Label:</source>
        <translation>popiska:</translation>
    </message>
    <message>
        <location line="+57"/>
        <location line="+4"/>
        <source>logarithmical</source>
        <translation>logaritmicky</translation>
    </message>
    <message>
        <location line="-4"/>
        <location line="+4"/>
        <source>Grid</source>
        <translation>rastr</translation>
    </message>
    <message>
        <location line="-53"/>
        <source>&lt;b&gt;Label text&lt;/b&gt;: Use LaTeX style for special characters, e.g. \tau</source>
        <translation>&lt;b&gt;označení os&lt;/b&gt;: použijte speciálních znaků jako v LaTeXu, např. \tau</translation>
    </message>
    <message>
        <location line="+117"/>
        <source>2D-projection:</source>
        <translation>2D-projekce:</translation>
    </message>
    <message>
        <location line="-171"/>
        <source>Type</source>
        <translation>Typ</translation>
    </message>
    <message>
        <location line="+119"/>
        <source>hide invisible lines</source>
        <translation>skrýt neviditelné linky</translation>
    </message>
</context>
<context>
    <name>DigiSettingsDialog</name>
    <message>
        <location filename="dialogs/digisettingsdialog.cpp" line="+40"/>
        <location line="+94"/>
        <source>Document Settings</source>
        <translation>Nastavení dokumentu</translation>
    </message>
    <message>
        <location line="-73"/>
        <source>Duration of Simulation:</source>
        <translation>Doba trvání simulace:</translation>
    </message>
    <message>
        <location line="+38"/>
        <source>Ok</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="+35"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="-87"/>
        <source>Digital Simulation Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Simulation</source>
        <translation type="unfinished">Simulace</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Precompile Module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Libraries:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-11"/>
        <source>Library Name:</source>
        <translation type="unfinished">Jméno knihovny:</translation>
    </message>
</context>
<context>
    <name>DisplayDialog</name>
    <message>
        <location filename="../qucs-lib/displaydialog.cpp" line="+89"/>
        <source>Close</source>
        <translation>Zavřít</translation>
    </message>
    <message>
        <location line="-35"/>
        <source>VHDL</source>
        <translation></translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Verilog</source>
        <translation></translation>
    </message>
    <message>
        <location line="-30"/>
        <source>Analogue</source>
        <translation>Analogový</translation>
    </message>
</context>
<context>
    <name>ExportDialog</name>
    <message>
        <location filename="dialogs/exportdialog.cpp" line="+24"/>
        <source>Export graphics</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Save to file (Graphics format by extension)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Width  in pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Height in pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Scale factor: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Image format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Export</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Colour</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Monochrome</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Original width to height ratio</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Original size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Export selected only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+39"/>
        <source>Export schematic to raster or vector image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>Export to image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+156"/>
        <source>Export diagram to raster or vector image</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FileShowDialog</name>
    <message>
        <source>File: </source>
        <translation type="obsolete">Soubor: </translation>
    </message>
    <message>
        <source>ERROR: Cannot read file: </source>
        <translation type="obsolete">CHYBA: Soubor nelze přečíst: </translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="obsolete">OK</translation>
    </message>
</context>
<context>
    <name>FillDialog</name>
    <message>
        <location filename="paintings/filldialog.cpp" line="+119"/>
        <source>OK</source>
        <translation>Hotovo</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="-68"/>
        <source>Line Color: </source>
        <translation>Barva čáry: </translation>
    </message>
    <message>
        <source>      Line Width: </source>
        <translation type="obsolete">Tloušťka čáry: </translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Line Style: </source>
        <translation>Druh čáry: </translation>
    </message>
    <message>
        <location line="+2"/>
        <source>solid line</source>
        <translation>Plná čára</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash line</source>
        <translation>Čárkovaná čára</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dot line</source>
        <translation>Tečkovaná čára</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot line</source>
        <translation>Čárka-tečka čára</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dash dot dot line</source>
        <translation>Čárka-tečka-tečka čára</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Fill Color: </source>
        <translation>Barva výplně: </translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Fill Style: </source>
        <translation>Vzorek výplně: </translation>
    </message>
    <message>
        <location line="+3"/>
        <source>no filling</source>
        <translation>Bez výplně</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>solid</source>
        <translation>Zcela vyplněná</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 1 (densest)</source>
        <translation>Hustota 1 (nejhustší)</translation>
    </message>
    <message>
        <source>dense 2 (densest)</source>
        <translation type="obsolete">Hustota 2 (nejhustší)</translation>
    </message>
    <message>
        <source>dense 3 (densest)</source>
        <translation type="obsolete">Hustota 3 (nejhustší)</translation>
    </message>
    <message>
        <source>dense 4 (densest)</source>
        <translation type="obsolete">Hustota 4 (nejhustší)</translation>
    </message>
    <message>
        <source>dense 5 (densest)</source>
        <translation type="obsolete">Hustota 5 (nejhustší)</translation>
    </message>
    <message>
        <source>dense 6 (densest)</source>
        <translation type="obsolete">Hustota 6 (nejhustší)</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>dense 7 (least dense)</source>
        <translation>Hustota 7 (nejřidší)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>horizontal line</source>
        <translation>Vodorovná čára</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>vertical line</source>
        <translation>svislá čára</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>crossed lines</source>
        <translation>Překřížené čáry</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>hatched backwards</source>
        <translation>Pravé šrafování</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>hatched forwards</source>
        <translation>Levé šrafování</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>diagonal crossed</source>
        <translation>Úhlopříčně křížené</translation>
    </message>
    <message>
        <location line="-60"/>
        <source>Line Width: </source>
        <translation>Šířka čáry:</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Line Style</source>
        <translation>Styl čáry</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>enable filling</source>
        <translation>s výplní</translation>
    </message>
    <message>
        <location line="+33"/>
        <source>Filling Style</source>
        <translation>Vzor výplně</translation>
    </message>
    <message>
        <location line="-15"/>
        <source>dense 2</source>
        <translation>Hustota 2</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 3</source>
        <translation>Hustota 3</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 4</source>
        <translation>Hustota 4</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 5</source>
        <translation>Hustota 5</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>dense 6</source>
        <translation>Hustota 6</translation>
    </message>
</context>
<context>
    <name>GraphicTextDialog</name>
    <message>
        <location filename="paintings/graphictextdialog.cpp" line="+36"/>
        <source>Edit Text Properties</source>
        <translation>Změnit vlastnosti textu</translation>
    </message>
    <message>
        <location line="+38"/>
        <source>Text color: </source>
        <translation>Barva textu: </translation>
    </message>
    <message>
        <source>          Text size: </source>
        <translation type="obsolete">Velikost textu: </translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="obsolete">OK</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Zrušit</translation>
    </message>
    <message>
        <source>Text size: </source>
        <translation type="obsolete">Velikost textu: </translation>
    </message>
    <message>
        <source>Rotation angle: </source>
        <translation type="obsolete">Úhel otočení: </translation>
    </message>
    <message>
        <location line="-31"/>
        <source>Use LaTeX style for special characters, e.g. \tau</source>
        <translation>Použijte speciálních znaků jako v LaTeXu, např. \tau</translation>
    </message>
    <message>
        <location line="+42"/>
        <source>  Text size: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>  Rotation angle: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>The text must not be empty!</source>
        <translation>Text nesmí být prázdný!</translation>
    </message>
    <message>
        <location line="-78"/>
        <source>Use _{..} and ^{..} for sub- and super-positions.</source>
        <translation>Použít _{..} and ^{..} pro podsazené a nadsazené symboly.</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>&amp;OK</source>
        <translation>&amp;OK</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Zrušit</translation>
    </message>
</context>
<context>
    <name>HelpDialog</name>
    <message>
        <source>Qucs Help System</source>
        <translation type="obsolete">Qucs nápověda</translation>
    </message>
    <message>
        <source>Help Index</source>
        <translation type="obsolete">Seznam nápovědy</translation>
    </message>
    <message>
        <location filename="../qucs-filter/helpdialog.cpp" line="+67"/>
        <source>Close</source>
        <translation>Zavřít</translation>
    </message>
    <message>
        <location line="-29"/>
        <source>QucsFilter is a filter synthesis program. To create a filter, simply enter all parameters and press the big button at the bottom of the main window. Immediatly, the schematic of the filter is calculated and put into the clipboard. Now go to Qucs, open an empty schematic and press CTRL-V (paste from clipboard). The filter schematic can now be inserted and  simulated. Have lots of fun!</source>
        <translation>QucsFilter je program pro syntézu filtrů. Pro vytvoření filtru, jednoduše zadejte všechny parametry a stiskněte velké tlačítko ve spodní části okna.  Poté bude filter okamžitě vypočítán a výsledek zkopírován do schránky.  Nyní je nutno přejít do programu Qucs, otevřít prázdný dokument a stisknout Ctrl-V (zkopírovat ze schránky). Obvod filtru může být nyní vloženo a spuštěna simulace. Hodně úspěchů!</translation>
    </message>
    <message>
        <location filename="../qucs-transcalc/helpdialog.cpp" line="+32"/>
        <source>Help</source>
        <translation>Nápověda</translation>
    </message>
    <message>
        <source>Available transmission lines are: Microstrip, Rectangular Waveguide, Coaxial Line and Coupled Microstrips.</source>
        <translation type="obsolete">Dostupné typy vodičů jsou: mikropáskové vedení, čtvercový dutý vodič, koaxální kabel a svázaný mikropáskový vodič.</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Dismiss</source>
        <translation>Hotovo</translation>
    </message>
    <message>
        <location line="-23"/>
        <source>QucsTranscalc is an analysis and synthesis tool for calculating the electrical and physical properties of different kinds of RF and microwave transmission lines.</source>
        <translation>QucsTranscalc je nástroj pro analýzu a syntézu výpočtu elektrických a fyzikálních vlastností různých druhů HF a krátkovlných vedení.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>For each type of transmission line, using dialog boxes, you can enter values for the various parameters, and either calculate its electrical properties, or use the given electrical requirements to synthesize physical parameters of the required transmission line.</source>
        <translation>Pro každý druh vybraného přenosového vedení lze pomocí diaglogových boxů nastavit různé parametry a spočítány buď elektrické vlastnosti nebo na základě elektrických požadavků nalezeny fyzikální parametry.</translation>
    </message>
    <message>
        <source>Qucs Attenuator Help</source>
        <translation type="obsolete">Nápověda pro Qucs atenuátor</translation>
    </message>
    <message>
        <source>QucsAttenuator is an attenuator synthesis program. To create a attenuator, simply enter all the input parameters and press the calculation button. Immediatly, the schematic of the attenuator is calculated and put into the clipboard. Now go to Qucs, open an schematic and press CTRL-V (paste from clipboard). The attenuator schematic can now be inserted. Have lots of fun!</source>
        <translation type="obsolete">QucsAttenuator je program pro syntézu útlumového článku. K vygenerování modelu atenuátoru zadejte všechny vstupní parametry a stikněte tlačítko Vygenerovat. Obvod s atenuátorem je vypočítán a vložen do schránky. V programu Qucs stačí potom pomocí CTRL-V vložit atenuátor do stávajícího obvodu.</translation>
    </message>
</context>
<context>
    <name>ID_Dialog</name>
    <message>
        <location filename="paintings/id_dialog.cpp" line="+39"/>
        <source>Edit Subcircuit Properties</source>
        <translation>Úprava vlastností obvodu</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Prefix:</source>
        <translation>Prefix:</translation>
    </message>
    <message>
        <location line="+77"/>
        <source>OK</source>
        <translation>Hotovo</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="-73"/>
        <source>Parameters</source>
        <translation>Parametry</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>display</source>
        <translation>zobrazit</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Name</source>
        <translation>jméno</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Default</source>
        <translation>Standardní</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Description</source>
        <translation>Popis</translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+89"/>
        <location line="+31"/>
        <location line="+29"/>
        <location line="+57"/>
        <location line="+1"/>
        <location line="+18"/>
        <source>yes</source>
        <translation>ano</translation>
    </message>
    <message>
        <location line="-225"/>
        <location line="+120"/>
        <location line="+29"/>
        <source>no</source>
        <translation>ne</translation>
    </message>
    <message>
        <location line="-143"/>
        <source>display in schematic</source>
        <translation>zobrazit ve schématu</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Name:</source>
        <translation>Jméno:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Default Value:</source>
        <translation>Standardní hodnota:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Description:</source>
        <translation>Popis:</translation>
    </message>
    <message>
        <location line="+35"/>
        <source>Add</source>
        <translation>Přidat</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Remove</source>
        <translation>Odstranit</translation>
    </message>
    <message>
        <location line="+52"/>
        <location line="+8"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="-7"/>
        <source>Parameter must not be named &quot;File&quot;!</source>
        <translation>Parametr nesmí být pojmenován &quot;soubor&quot;!</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Parameter &quot;%1&quot; already in list!</source>
        <translation>Parametr &quot;%1&quot; je již v seznamu!</translation>
    </message>
    <message>
        <location line="-118"/>
        <source>Type</source>
        <translation type="unfinished">Typ</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Type:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImportDialog</name>
    <message>
        <source>Import Data File...</source>
        <translation type="obsolete">Importovat datový soubor...</translation>
    </message>
    <message>
        <source>Import File:</source>
        <translation type="obsolete">Importovat soubor:</translation>
    </message>
    <message>
        <location filename="dialogs/importdialog.cpp" line="+47"/>
        <source>Browse</source>
        <translation>Projít</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Output File:</source>
        <translation>Výstupní soubor:</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Messages</source>
        <translation>Zprávy</translation>
    </message>
    <message>
        <source>Import</source>
        <translation type="obsolete">Import</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Close</source>
        <translation>Zavřít</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>All known</source>
        <translation>Všechny známé</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Touchstone files</source>
        <translation>Touchstone soubory</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>CITI files</source>
        <translation>CITI soubory</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>ZVR ASCII files</source>
        <translation>ZVR ASCII soubory</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>IC-CAP model files</source>
        <translation>IC-CAP soubory modelů</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>VCD files</source>
        <translation>VCD soubory</translation>
    </message>
    <message>
        <source>Any File</source>
        <translation type="obsolete">Všechny soubory</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Enter a Data File Name</source>
        <translation>Vlož jméno datového souboru</translation>
    </message>
    <message>
        <location line="+47"/>
        <source>Info</source>
        <translation>Info</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Output file already exists!</source>
        <translation>Výstupní soubor již existuje!</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Overwrite it?</source>
        <translation>Přepsat ho?</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;Yes</source>
        <translation>&amp;Ano</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>&amp;No</source>
        <translation>&amp;Ne</translation>
    </message>
    <message>
        <location line="+37"/>
        <source>ERROR: Unknown file format! Please check file name extension!</source>
        <translation>CHYBA: neznámý formát souboru! Zkontrolujte příponu souboru!</translation>
    </message>
    <message>
        <source>ERROR: Cannot start simulator!</source>
        <translation type="obsolete">CHYBA: Nelze spustit simulátor!</translation>
    </message>
    <message>
        <source>Successfully imported file!</source>
        <translation type="obsolete">Soubor úspěšně importován!</translation>
    </message>
    <message>
        <location line="+112"/>
        <source>Converter ended with errors!</source>
        <translation>Konvertor byl ukončen -  vyskytly se chyby!</translation>
    </message>
    <message>
        <location line="-232"/>
        <source>Abort</source>
        <translation>Ukončit</translation>
    </message>
    <message>
        <location line="+170"/>
        <source>ERROR: Cannot start converter!</source>
        <translation>CHYBA: Nelze spustit převaděč!</translation>
    </message>
    <message>
        <location line="-144"/>
        <source>CSV files</source>
        <translation>CSV soubory</translation>
    </message>
    <message>
        <location line="-79"/>
        <source>Convert Data File...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>File specification</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Input File:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Output Data:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Qucs dataset</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Touchstone</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>CSV</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Qucs library</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Convert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>Qucs dataset files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>SPICE files</source>
        <translation type="unfinished">SPICE soubory</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Any file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+130"/>
        <source>Running command line:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-189"/>
        <source>Qucs netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+252"/>
        <source>Successfully converted file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-251"/>
        <source>Matlab</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LabelDialog</name>
    <message>
        <location filename="dialogs/labeldialog.cpp" line="+70"/>
        <location line="+29"/>
        <source>More...</source>
        <translation>Více...</translation>
    </message>
    <message>
        <location line="-40"/>
        <location line="+35"/>
        <source>Less...</source>
        <translation>Méně...</translation>
    </message>
    <message>
        <location line="-63"/>
        <source>Insert Nodename</source>
        <translation>Zadat označení uzlu</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Enter the label:</source>
        <translation>Zadat popisku:</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Initial node voltage:</source>
        <translation>Počáteční hodnota napětí v uzlu:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Ok</source>
        <translation>Ok</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
</context>
<context>
    <name>LibraryDialog</name>
    <message>
        <location filename="dialogs/librarydialog.cpp" line="+51"/>
        <source>Create Library</source>
        <translation>Vytvořit knihovnu</translation>
    </message>
    <message>
        <location line="+27"/>
        <location line="+108"/>
        <source>Library Name:</source>
        <translation>Jméno knihovny:</translation>
    </message>
    <message>
        <location line="-101"/>
        <source>Choose subcircuits:</source>
        <translation>Vybrat podobvody:</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Add subcircuit description</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <location line="+47"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="-44"/>
        <location line="+39"/>
        <source>Next &gt;&gt;</source>
        <translation>Další &gt;&gt;</translation>
    </message>
    <message>
        <source>No subcircuits!</source>
        <translation type="obsolete">Žádné podobvody!</translation>
    </message>
    <message>
        <location line="-23"/>
        <source>Enter description for:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Description:</source>
        <translation type="unfinished">Popis:</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Previous</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>Message:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>No projects!</source>
        <translation type="unfinished">Žádné projekty!</translation>
    </message>
    <message>
        <location line="+16"/>
        <location line="+17"/>
        <location line="+16"/>
        <location line="+6"/>
        <location filename="../qucs-lib/librarydialog.cpp" line="+134"/>
        <location line="+14"/>
        <location line="+11"/>
        <location line="+6"/>
        <location line="+7"/>
        <location line="+6"/>
        <location line="+20"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+11"/>
        <location line="+17"/>
        <location line="+8"/>
        <location line="+13"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="-39"/>
        <source>Please insert a library name!</source>
        <translation>Prosím vložit jméno knihovny!</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Please choose at least one subcircuit!</source>
        <translation>Prosím vybrat minimálně jeden podobvod!</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Warning</source>
        <translation>Upozornění</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cannot create user library directory !</source>
        <translation>Nelze vytvořit adresář uživatelských knihoven !</translation>
    </message>
    <message>
        <location line="+8"/>
        <location filename="../qucs-lib/librarydialog.cpp" line="-103"/>
        <source>A system library with this name already exists!</source>
        <translation>Systémová knihovna s tímto jménem již existuje!</translation>
    </message>
    <message>
        <location line="+6"/>
        <location filename="../qucs-lib/librarydialog.cpp" line="+6"/>
        <source>A library with this name already exists!</source>
        <translation>Knihovna s tímto jménem již existuje!</translation>
    </message>
    <message>
        <location line="+181"/>
        <source>Creating Qucs netlist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Error: Cannot create netlist for &quot;%1&quot;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Creating Verilog netlist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Creating VHDL netlist.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+50"/>
        <source>Error creating library.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter description for &quot;%1&quot;:</source>
        <translation type="obsolete">Vložit popis pro &quot;%1&quot;:</translation>
    </message>
    <message>
        <location line="-415"/>
        <location line="+193"/>
        <source>Create</source>
        <translation>Vytvořit</translation>
    </message>
    <message>
        <location line="-160"/>
        <location filename="../qucs-lib/librarydialog.cpp" line="-91"/>
        <source>Close</source>
        <translation>Zavřít</translation>
    </message>
    <message>
        <location line="+163"/>
        <source>Next...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+50"/>
        <source>Saving library...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Error: Cannot create library!</source>
        <translation>Chyba: nelze vytvořit knihovnu!</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Loading subcircuit &quot;%1&quot;.
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Error: Cannot load subcircuit &quot;%1&quot;.</source>
        <translation>Chyba: Nelze otevřít podobvod &quot;%1&quot;.</translation>
    </message>
    <message>
        <source>
Successfully created library.</source>
        <translation type="obsolete">Knihovna úspěšně vytvořena.</translation>
    </message>
    <message>
        <location filename="../qucs-lib/librarydialog.cpp" line="-32"/>
        <source>Manage User Libraries</source>
        <translation>Správa uživatelských knihoven</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Choose library:</source>
        <translation>Vybrat knihovnu:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>New Name:</source>
        <translation>Nové jméno:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Delete</source>
        <translation>Smazat</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Rename</source>
        <translation>Přejmenovat</translation>
    </message>
    <message>
        <source>No user library!</source>
        <translation type="obsolete">Žádná uživatelská knihovna!</translation>
    </message>
    <message>
        <location line="+62"/>
        <source>Please insert a new library name!</source>
        <translation>Prosím vložit nové jméno knihovny!</translation>
    </message>
    <message>
        <location line="+14"/>
        <location line="+93"/>
        <source>Please choose a library!</source>
        <translation>Prosím vybrat knihovnu!</translation>
    </message>
    <message>
        <location line="-63"/>
        <source>Cannot open library!</source>
        <translation>Nelze otevřít knihovnu!</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>No permission to modify library!</source>
        <translation>Chybí oprávnění k úpravě knihovny!</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Writing new library not successful!</source>
        <translation>Zápis nové knihovny nebyl úspěšný!</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Cannot delete old library.</source>
        <translation>Nelze smazat původní knihovnu.</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Library file is corrupt!</source>
        <translation>Soubor s knihovnou je poškozený!</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>No permission to delete library &quot;%1&quot;.</source>
        <translation>Chybí práva ke smazání knihovny &quot;%1&quot;.</translation>
    </message>
    <message>
        <location filename="dialogs/librarydialog.cpp" line="+141"/>
        <source>Successfully created library.</source>
        <translation>Knihovna úspěšně vytvořena.</translation>
    </message>
    <message>
        <location line="-476"/>
        <source>Select All</source>
        <translation>Vybrat vše</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Deselect All</source>
        <translation>Zrušit vybrání všeho</translation>
    </message>
    <message>
        <location filename="../qucs-lib/librarydialog.cpp" line="-78"/>
        <source>Cannot rename library subdirectory!</source>
        <translation>Nelze přejmenovat podadresář knihovny!</translation>
    </message>
    <message>
        <location line="+91"/>
        <source>No permission to delete library subdirectory &quot;%1&quot;.</source>
        <translation>Chybí oprávnění ke smazání podadresáře &quot;%1&quot;.</translation>
    </message>
</context>
<context>
    <name>LineDialog</name>
    <message>
        <source>Line color: </source>
        <translation type="obsolete">Barva čáry: </translation>
    </message>
    <message>
        <source>      Line Width: </source>
        <translation type="obsolete">Tloušťka čáry: </translation>
    </message>
    <message>
        <source>Line Style: </source>
        <translation type="obsolete">Typ čáry: </translation>
    </message>
    <message>
        <source>solid line</source>
        <translation type="obsolete">Plná čára</translation>
    </message>
    <message>
        <source>dash line</source>
        <translation type="obsolete">Čárkovaná čára</translation>
    </message>
    <message>
        <source>dot line</source>
        <translation type="obsolete">Tečkovaná čára</translation>
    </message>
    <message>
        <source>dash dot line</source>
        <translation type="obsolete">Čárka-tečka čára</translation>
    </message>
    <message>
        <source>dash dot dot line</source>
        <translation type="obsolete">Čárka-tečka-tečka čárka</translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="obsolete">Hotovo</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Zrušit</translation>
    </message>
</context>
<context>
    <name>LoadDialog</name>
    <message>
        <location filename="dialogs/loaddialog.cpp" line="+45"/>
        <source>Load Verilog-A symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Choose Verilog-A symbol files:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Select All</source>
        <translation type="unfinished">Vybrat vše</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Deselect All</source>
        <translation type="unfinished">Zrušit vybrání všeho</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Ok</source>
        <translation type="unfinished">Ok</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Change Icon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>auto-load selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Load the selected symbols when opening the project.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+83"/>
        <source>Info</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Icon not found:
 %1.png</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+47"/>
        <source>Open File</source>
        <translation type="unfinished">Otevřít soubor</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Icon image (*.png)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>File not found: %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MarkerDialog</name>
    <message>
        <location filename="diagrams/markerdialog.cpp" line="+33"/>
        <source>Edit Marker Properties</source>
        <translation>Změnit vlastnosti značení</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Precision: </source>
        <translation>Přesnost: </translation>
    </message>
    <message>
        <location line="+31"/>
        <source>OK</source>
        <translation>Hotovo</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="-22"/>
        <source>Number Notation: </source>
        <translation>Číselné zobrazení:</translation>
    </message>
    <message>
        <location line="-5"/>
        <source>Z0: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>real/imaginary</source>
        <translation>Reálná a imaginární část</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>magnitude/angle (degree)</source>
        <translation>amplituda/fáze (ve stupních)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>magnitude/angle (radian)</source>
        <translation>amplituda/fáze (v radiánech)</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>transparent</source>
        <translation>Průhledný</translation>
    </message>
</context>
<context>
    <name>MatchDialog</name>
    <message>
        <location filename="dialogs/matchdialog.cpp" line="+48"/>
        <source>Create Matching Circuit</source>
        <translation>Vytvořit odpovídající obvod</translation>
    </message>
    <message>
        <location line="+136"/>
        <source>Frequency:</source>
        <translation>Frekvence:</translation>
    </message>
    <message>
        <source>Impedance:</source>
        <translation type="obsolete">Impedance:</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Create</source>
        <translation>Vytvořit</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="+274"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Real part of impedance must be greater zero,
but is %1 !</source>
        <translation>Reálná hodnota impedance musí být větší jak nula,
je ale %1 !</translation>
    </message>
    <message>
        <location line="-426"/>
        <source>calculate two-port matching</source>
        <translation>Vypočítat přizpůsobení dvoupolu</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Reference Impedance</source>
        <translation>Referenční impedance</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Port 1</source>
        <translation>Port 1</translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+6"/>
        <source>ohms</source>
        <translation>ohmů</translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Port 2</source>
        <translation>Port 2</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>S Parameter</source>
        <translation>S Parametr</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Input format</source>
        <translation>Vstupní formát</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>real/imag</source>
        <translation>reálná/imaginární část</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>mag/deg</source>
        <translation>amplituda/úhel</translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+134"/>
        <source>S11</source>
        <translation>S11</translation>
    </message>
    <message>
        <location line="-133"/>
        <location line="+134"/>
        <source>S21</source>
        <translation>S21</translation>
    </message>
    <message>
        <location line="-100"/>
        <source>S12</source>
        <translation>S12</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>S22</source>
        <translation>S22</translation>
    </message>
    <message>
        <location line="+117"/>
        <source>Reflexion Coefficient</source>
        <translation>Reflexní keoficient</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Impedance (ohms)</source>
        <translation>Impedance (Ohmů)</translation>
    </message>
</context>
<context>
    <name>MessageBox</name>
    <message>
        <source>Save</source>
        <translation type="obsolete">Uložit</translation>
    </message>
    <message>
        <source>Save all</source>
        <translation type="obsolete">Uložit vše</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation type="obsolete">Neukládat</translation>
    </message>
    <message>
        <source>DiscardAll</source>
        <translation type="obsolete">Nic neukládat</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Zrušit</translation>
    </message>
    <message>
        <source>Discard all</source>
        <translation type="obsolete">Nic neukládat</translation>
    </message>
</context>
<context>
    <name>MessageDock</name>
    <message>
        <location filename="messagedock.cpp" line="+49"/>
        <source>admsXml</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Compiler</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>NewProjDialog</name>
    <message>
        <location filename="dialogs/newprojdialog.cpp" line="+30"/>
        <source>Create new project</source>
        <translation>Vytvořit nový projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Project name:</source>
        <translation>Jméno projektu:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>open new project</source>
        <translation>Otevřít nový projekt</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Create</source>
        <translation>vytvořit</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
</context>
<context>
    <name>OctaveWindow</name>
    <message>
        <location filename="octave_window.cpp" line="+126"/>
        <source>ERROR: Cannot start Octave!</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OptimizeDialog</name>
    <message>
        <location filename="components/optimizedialog.cpp" line="+48"/>
        <source>Edit Optimization Properties</source>
        <translation>Upravit vlastnosti optimizace</translation>
    </message>
    <message>
        <location line="+15"/>
        <location line="+97"/>
        <location line="+63"/>
        <source>Name:</source>
        <translation>Jméno:</translation>
    </message>
    <message>
        <location line="-155"/>
        <source>Simulation:</source>
        <translation>Simulace:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>General</source>
        <translation>Základní</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Method:</source>
        <translation>Metoda:</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Maximum number of iterations:</source>
        <translation>Maximální počet iterací:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Output refresh cycle:</source>
        <translation>Obnovovací cyklus výstupu: </translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Number of parents:</source>
        <translation>Počet rodičů:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Constant F:</source>
        <translation>Konstantní F:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Crossing over factor:</source>
        <translation type="unfinished">Crossing over factor:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Pseudo random number seed:</source>
        <translation type="unfinished">Pseudo random number seed:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Minimum cost variance:</source>
        <translation type="unfinished">Minimum cost variance:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Cost objectives:</source>
        <translation type="unfinished">Cost objectives:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Cost constraints:</source>
        <translation type="unfinished">Cost constraints:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Algorithm</source>
        <translation>Algoritmus</translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+70"/>
        <source>Name</source>
        <translation>jméno</translation>
    </message>
    <message>
        <location line="-69"/>
        <location line="+19"/>
        <source>active</source>
        <translation>aktivní</translation>
    </message>
    <message>
        <location line="-18"/>
        <source>initial</source>
        <translation>počáteční</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>min</source>
        <translation>min</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>max</source>
        <translation>max</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+66"/>
        <source>Type</source>
        <translation>Typ</translation>
    </message>
    <message>
        <location line="-46"/>
        <source>initial:</source>
        <translation>počáteční:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>min:</source>
        <translation>min:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>max:</source>
        <translation>max:</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Type:</source>
        <translation>Typ:</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+116"/>
        <location line="+286"/>
        <source>linear double</source>
        <translation type="unfinished">lineární double</translation>
    </message>
    <message>
        <location line="-401"/>
        <location line="+116"/>
        <location line="+286"/>
        <source>logarithmic double</source>
        <translation type="unfinished">logaritmický double</translation>
    </message>
    <message>
        <location line="-401"/>
        <location line="+116"/>
        <location line="+286"/>
        <source>linear integer</source>
        <translation type="unfinished">lineární integer</translation>
    </message>
    <message>
        <location line="-401"/>
        <location line="+116"/>
        <source>logarithmic integer</source>
        <translation type="unfinished">logaritmický integer</translation>
    </message>
    <message>
        <location line="-111"/>
        <location line="+50"/>
        <source>Add</source>
        <translation>Přidat</translation>
    </message>
    <message>
        <location line="-48"/>
        <location line="+50"/>
        <source>Delete</source>
        <translation>Smazat</translation>
    </message>
    <message>
        <location line="-47"/>
        <source>Variables</source>
        <translation>Proměnné</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Value</source>
        <translation>hodnota</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Value:</source>
        <translation>Hodnota:</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+80"/>
        <location line="+302"/>
        <source>less</source>
        <translation type="unfinished">menší</translation>
    </message>
    <message>
        <location line="-381"/>
        <location line="+80"/>
        <location line="+302"/>
        <source>greater</source>
        <translation>větší</translation>
    </message>
    <message>
        <location line="-381"/>
        <location line="+80"/>
        <location line="+302"/>
        <source>equal</source>
        <translation>rovno</translation>
    </message>
    <message>
        <location line="-381"/>
        <location line="+80"/>
        <source>monitor</source>
        <translation>monitor</translation>
    </message>
    <message>
        <location line="-65"/>
        <source>Goals</source>
        <translation>Cíle</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Apply</source>
        <translation>Použít</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="+37"/>
        <location line="+48"/>
        <location line="+28"/>
        <location line="+30"/>
        <location line="+180"/>
        <source>yes</source>
        <translation>ano</translation>
    </message>
    <message>
        <location line="-286"/>
        <location line="+76"/>
        <location line="+30"/>
        <source>no</source>
        <translation>ne</translation>
    </message>
    <message>
        <location line="-45"/>
        <location line="+8"/>
        <location line="+105"/>
        <location line="+8"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="-120"/>
        <location line="+113"/>
        <source>Every text field must be non-empty!</source>
        <translation>Žádné textové pole nesmí být prázdné!</translation>
    </message>
    <message>
        <location line="-105"/>
        <source>Variable &quot;%1&quot; already in list!</source>
        <translation>Proměnná &quot;%1&quot; je již v seznamu!</translation>
    </message>
    <message>
        <location line="+113"/>
        <source>Goal &quot;%1&quot; already in list!</source>
        <translation>Cíl &quot;%1&quot; je již v seznamu!</translation>
    </message>
    <message>
        <location line="-253"/>
        <location line="+80"/>
        <location line="+302"/>
        <source>minimize</source>
        <translation>minimalizovat</translation>
    </message>
    <message>
        <location line="-381"/>
        <location line="+80"/>
        <location line="+302"/>
        <source>maximize</source>
        <translation>maximalizovat</translation>
    </message>
</context>
<context>
    <name>OptionsDialog</name>
    <message>
        <location filename="../qucs-transcalc/optionsdialog.cpp" line="+36"/>
        <source>Options</source>
        <translation>Možnosti</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Units</source>
        <translation>Jednotky</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Frequency</source>
        <translation>Frekvence</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Length</source>
        <translation>Délka</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Resistance</source>
        <translation>Odpor</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Angle</source>
        <translation>Úhel</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Save as Default</source>
        <translation>Uložit jako předlohu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Dismiss</source>
        <translation>Hotovo</translation>
    </message>
</context>
<context>
    <name>PackageDialog</name>
    <message>
        <location filename="dialogs/packagedialog.cpp" line="+61"/>
        <source>Create Project Package</source>
        <translation>Vytvořit projekt</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Package:</source>
        <translation>Balíček:</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Browse</source>
        <translation>Projít</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>include user libraries</source>
        <translation>včetně uživatelských knihoven</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Choose projects:</source>
        <translation>Vybrat projekty:</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Create</source>
        <translation>Vytvořit</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>No projects!</source>
        <translation>Žádné projekty!</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Extract Project Package</source>
        <translation>Extrahovat balíček projektu</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Close</source>
        <translation>Zavřít</translation>
    </message>
    <message>
        <location line="+19"/>
        <location line="+186"/>
        <source>Qucs Packages</source>
        <translation>Qucs balíčky</translation>
    </message>
    <message>
        <location line="-185"/>
        <location line="+186"/>
        <source>Any File</source>
        <translation>Všechny soubory</translation>
    </message>
    <message>
        <location line="-185"/>
        <location line="+186"/>
        <source>Enter a Package File Name</source>
        <translation>Vložit jméno balíčku</translation>
    </message>
    <message>
        <location line="-165"/>
        <location line="+69"/>
        <location line="+15"/>
        <location line="+19"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="-102"/>
        <source>Cannot open &quot;%1&quot;!</source>
        <translation>Nelze otevřít &quot;%1&quot;!</translation>
    </message>
    <message>
        <location line="+68"/>
        <source>Please insert a package name!</source>
        <translation>Prosím zadat jméno balíčku!</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Please choose at least one project!</source>
        <translation>Prosím vybrat minimálně jeden projekt!</translation>
    </message>
    <message>
        <location line="+13"/>
        <location line="+51"/>
        <source>Info</source>
        <translation>Informace</translation>
    </message>
    <message>
        <location line="-50"/>
        <source>Output file already exists!</source>
        <translation>Výstupní soubor již existuje!</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Overwrite it?</source>
        <translation>Přepsat ho?</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;Yes</source>
        <translation>&amp;Ano</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>&amp;No</source>
        <translation>&amp;Ne</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Cannot create package!</source>
        <translation>Nelze vytvořit balíček!</translation>
    </message>
    <message>
        <location line="+46"/>
        <source>Successfully created Qucs package!</source>
        <translation>Úspěšně vytvořen Qucs balíček!</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>ERROR: Cannot open package!</source>
        <translation>CHYBA: Nelze otevřít balíček!</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>ERROR: File contains wrong header!</source>
        <translation>CHYBA: Soubor obsahuje chybnou hlavičku!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>ERROR: Wrong version number!</source>
        <translation>CHYBA: Chybné číslo verze!</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>ERROR: Checksum mismatch!</source>
        <translation>CHYBA: Kontrolní součet nesouhlasí! </translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Leave directory &quot;%1&quot;</source>
        <translation>Opustit adresář &quot;%1&quot;</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>ERROR: Package is corrupt!</source>
        <translation>CHYBA: Balíček je poškozený!</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Successfully extracted package!</source>
        <translation>Balíček úspěšně rozbalen!</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>ERROR: Project directory &quot;%1&quot; already exists!</source>
        <translation>CHYBA: Adresář projektu &quot;%1&quot; již existuje!</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>ERROR: Cannot create directory &quot;%1&quot;!</source>
        <translation>CHYBA: Nelze vytvořit adresář &quot;%1&quot;!</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Create and enter directory &quot;%1&quot;</source>
        <translation>Vytvořit a přejít do adresáře &quot;%1&quot;</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>ERROR: Cannot create file &quot;%1&quot;!</source>
        <translation>CHYBA: Nelze vytvořit soubor &quot;%1&quot;!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Create file &quot;%1&quot;</source>
        <translation>Vytvořit soubor &quot;%1&quot;</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>ERROR: User library &quot;%1&quot; already exists!</source>
        <translation>CHYBA: Uživatelská knihovna &quot;%1&quot; již existuje!</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>ERROR: Cannot create library &quot;%1&quot;!</source>
        <translation>CHYBA: Nelze vytvořit knihovnu &quot;%1&quot;!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Create library &quot;%1&quot;</source>
        <translation>Vytvořit knihovnu &quot;%1&quot;</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="schematic.cpp" line="+106"/>
        <location filename="textdoc.cpp" line="+64"/>
        <source>untitled</source>
        <translation>nepojmenováno</translation>
    </message>
    <message>
        <location filename="octave_window.cpp" line="-31"/>
        <location filename="qucs_actions.cpp" line="+1365"/>
        <location filename="schematic_file.cpp" line="+113"/>
        <location line="+18"/>
        <location line="+21"/>
        <location line="+24"/>
        <location line="+17"/>
        <location line="+72"/>
        <location line="+78"/>
        <location line="+189"/>
        <location line="+5"/>
        <location line="+37"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+68"/>
        <location line="+59"/>
        <location line="+18"/>
        <location line="+29"/>
        <location line="+6"/>
        <location line="+8"/>
        <location line="+17"/>
        <location line="+16"/>
        <location line="+6"/>
        <location line="+8"/>
        <location line="+10"/>
        <location line="+20"/>
        <location line="+56"/>
        <location filename="components/component.cpp" line="+1538"/>
        <location line="+20"/>
        <location line="+8"/>
        <location filename="components/vacomponent.cpp" line="+298"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Octave not found in: %1

Set the Octave location on the application settings.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="-774"/>
        <source>Wrong document version: </source>
        <translation>Špatná verze dokumentu: </translation>
    </message>
    <message>
        <location line="+21"/>
        <location line="+24"/>
        <source>Clipboard Format Error:
Unknown field!</source>
        <translation>Chybný formát ve schránce:
Neznámá položka!</translation>
    </message>
    <message>
        <location line="+89"/>
        <source>Cannot save JSON symbol file &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+78"/>
        <source>Cannot save document!</source>
        <translation>Dokument nelze uložit!</translation>
    </message>
    <message>
        <location line="+189"/>
        <location line="+5"/>
        <source>Format Error:
Wrong property field limiter!</source>
        <translation>Chyba formátu:
Chybný oddělovač parametru!</translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Format Error:
Unknown property: </source>
        <translation>Chyba formátu:
Neznámá vlastnost: </translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Format Error:
Number expected in property field!</source>
        <translation>Chyba formátu:
V položce parametru je očekáváno číslo!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Format Error:
&apos;Property&apos; field is not closed!</source>
        <translation>Chyba formátu:
&apos;Property&apos; Položka nebyla uzavřena!</translation>
    </message>
    <message>
        <source>Format Error:
Unknown component!</source>
        <translation type="obsolete">Chyba formátu:
Neznámé komponenty!</translation>
    </message>
    <message>
        <location filename="components/component.cpp" line="+1"/>
        <source>Format Error:
Wrong &apos;component&apos; line format!</source>
        <translation>Chyba formátu:
Chybný řádkový formát &apos;component&apos; !</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="+68"/>
        <source>Format Error:
&apos;Component&apos; field is not closed!</source>
        <translation>Chyba formátu:
&apos;Component&apos; Položka nebyla uzavřena!</translation>
    </message>
    <message>
        <location line="+59"/>
        <source>Format Error:
Wrong &apos;wire&apos; line format!</source>
        <translation>Chyba formátu:
Chybný &apos;wire&apos; formát řádku!</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Format Error:
&apos;Wire&apos; field is not closed!</source>
        <translation>Chyba formátu:
&apos;Wire&apos; položka nebyla uzavřena!</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Format Error:
Unknown diagram!</source>
        <translation>Chyba formátu:
Neznámý diagram!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Format Error:
Wrong &apos;diagram&apos; line format!</source>
        <translation>Chyba formátu:
Chybný formát řádku &apos;diagram&apos;!</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Format Error:
&apos;Diagram&apos; field is not closed!</source>
        <translation>Chyba formátu:
&apos;Diagram&apos; položka nebyla uzavřena!</translation>
    </message>
    <message>
        <location line="+33"/>
        <source>Format Error:
Unknown painting!</source>
        <translation>Chyba formátu:
Neznámý grafický objekt!</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Format Error:
Wrong &apos;painting&apos; line format!</source>
        <translation>Chyba formátu:
Chybný formát řádku v &apos;grafických objektů&apos;!</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>Wrong document version 
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-747"/>
        <location line="+707"/>
        <source>Format Error:
&apos;Painting&apos; field is not closed!</source>
        <translation>Chyba formátu:
&apos;Grafický objekt&apos; Položka není uzavřena!</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Cannot load document: </source>
        <translation>Doument nelze otevřít: </translation>
    </message>
    <message>
        <source>Wrong document type!</source>
        <translation type="obsolete">Nesprávný typ dokumentu!</translation>
    </message>
    <message>
        <location line="+76"/>
        <source>File Format Error:
Unknown field!</source>
        <translation>Chyba formátu souboru:
Neznámá položka!</translation>
    </message>
    <message>
        <location filename="components/resistor.cpp" line="+25"/>
        <source>resistor</source>
        <translation>Odpor</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>ohmic resistance in Ohms</source>
        <translation>Ohmický odpor v Ohmech</translation>
    </message>
    <message>
        <location filename="paintings/ellipse.cpp" line="+372"/>
        <source>Edit Ellipse Properties</source>
        <translation>Změnit vlastnosti elipsy</translation>
    </message>
    <message>
        <location filename="paintings/graphicline.cpp" line="+328"/>
        <source>Edit Line Properties</source>
        <translation>Změnit vlastnosti čáry</translation>
    </message>
    <message>
        <location filename="paintings/rectangle.cpp" line="+374"/>
        <source>Edit Rectangle Properties</source>
        <translation>Změnit vlastnosti obdélníku</translation>
    </message>
    <message>
        <source>Cannot load dataset: </source>
        <translation type="obsolete">Datová sada nelze otevřít: </translation>
    </message>
    <message>
        <location filename="components/ac_sim.cpp" line="+24"/>
        <location line="+48"/>
        <source>ac simulation</source>
        <translation>AC-Simulace</translation>
    </message>
    <message>
        <location line="-21"/>
        <location filename="components/sp_sim.cpp" line="+50"/>
        <source>start frequency in Hertz</source>
        <translation>Počáteční frekvence v Hertzích</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/sp_sim.cpp" line="+2"/>
        <source>stop frequency in Hertz</source>
        <translation>Koncová frekvence v Hertzích</translation>
    </message>
    <message>
        <source>frequency steps in Hertz</source>
        <translation type="obsolete">frekvenční krok v Hertzích</translation>
    </message>
    <message>
        <location filename="components/ampere_dc.cpp" line="+23"/>
        <source>ideal dc current source</source>
        <translation>ideální DC zdroj</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>current in Ampere</source>
        <translation>Proud v ampérech</translation>
    </message>
    <message>
        <location filename="components/ampere_noise.cpp" line="+23"/>
        <source>noise current source</source>
        <translation>Proudový zdroj rušení</translation>
    </message>
    <message>
        <source>equivalent current density in A/sqrt(Hz)</source>
        <translation type="obsolete">ekvivalentní proudová hustota v A/sqrt(Hz)</translation>
    </message>
    <message>
        <location line="+30"/>
        <location filename="components/noise_ii.cpp" line="+77"/>
        <location filename="components/noise_iv.cpp" line="+72"/>
        <location filename="components/noise_vv.cpp" line="+67"/>
        <location filename="components/volt_noise.cpp" line="+48"/>
        <source>frequency exponent</source>
        <translation>frekvenční exponent</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/noise_ii.cpp" line="+2"/>
        <location filename="components/noise_iv.cpp" line="+2"/>
        <location filename="components/noise_vv.cpp" line="+2"/>
        <location filename="components/volt_noise.cpp" line="+2"/>
        <source>frequency coefficient</source>
        <translation>frekvenční koeficient</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/noise_ii.cpp" line="+2"/>
        <location filename="components/noise_iv.cpp" line="+2"/>
        <location filename="components/noise_vv.cpp" line="+2"/>
        <location filename="components/volt_noise.cpp" line="+2"/>
        <source>additive frequency term</source>
        <translation>dodatkový frekvenční výraz</translation>
    </message>
    <message>
        <location filename="components/attenuator.cpp" line="+23"/>
        <source>attenuator</source>
        <translation>útlumový člen</translation>
    </message>
    <message>
        <source>attenuation</source>
        <translation type="obsolete">utlumení</translation>
    </message>
    <message>
        <location line="+31"/>
        <location filename="components/coupler.cpp" line="+68"/>
        <location filename="components/gyrator.cpp" line="+57"/>
        <location filename="components/hybrid.cpp" line="+58"/>
        <location filename="components/phaseshifter.cpp" line="+49"/>
        <source>reference impedance</source>
        <translation>referenční impedance</translation>
    </message>
    <message>
        <location filename="components/biast.cpp" line="+23"/>
        <source>bias t</source>
        <translation>Bias T</translation>
    </message>
    <message>
        <location filename="components/capacitor.cpp" line="+23"/>
        <source>capacitor</source>
        <translation>kondenzátor</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>capacitance in Farad</source>
        <translation>kapazita ve Faradech</translation>
    </message>
    <message>
        <location filename="components/cccs.cpp" line="+23"/>
        <source>current controlled current source</source>
        <translation>proudově řízený zdroj proudu</translation>
    </message>
    <message>
        <location line="+38"/>
        <location filename="components/ccvs.cpp" line="+62"/>
        <location filename="components/vcvs.cpp" line="+64"/>
        <source>forward transfer factor</source>
        <translation>faktor dopředného přenosu</translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="components/ccvs.cpp" line="+1"/>
        <location filename="components/component.cpp" line="-265"/>
        <location filename="components/d_flipflop.cpp" line="+27"/>
        <location filename="components/ifile.cpp" line="+60"/>
        <location filename="components/jk_flipflop.cpp" line="+29"/>
        <location filename="components/logical_buf.cpp" line="+33"/>
        <location filename="components/logical_inv.cpp" line="+33"/>
        <location filename="components/rs_flipflop.cpp" line="+27"/>
        <location filename="components/vccs.cpp" line="+64"/>
        <location filename="components/vcvs.cpp" line="+1"/>
        <location filename="components/vfile.cpp" line="+62"/>
        <source>delay time</source>
        <translation>doba prodlevy</translation>
    </message>
    <message>
        <location filename="components/ccvs.cpp" line="-40"/>
        <source>current controlled voltage source</source>
        <translation>proudově řízený zdroj napětí</translation>
    </message>
    <message>
        <location filename="components/circulator.cpp" line="+24"/>
        <source>circulator</source>
        <translation>cirkulátor</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>reference impedance of port 1</source>
        <translation>referenční impedance na portu 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>reference impedance of port 2</source>
        <translation>referenční impedance na portu 2</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>reference impedance of port 3</source>
        <translation>referenční impedance na portu 3</translation>
    </message>
    <message>
        <location filename="components/coplanar.cpp" line="+23"/>
        <source>coplanar line</source>
        <translation>koplanární vedení</translation>
    </message>
    <message>
        <location line="+37"/>
        <location filename="components/cpwgap.cpp" line="+64"/>
        <location filename="components/cpwopen.cpp" line="+63"/>
        <location filename="components/cpwshort.cpp" line="+62"/>
        <location filename="components/cpwstep.cpp" line="+66"/>
        <location filename="components/mscoupled.cpp" line="+57"/>
        <location filename="components/msgap.cpp" line="+51"/>
        <location filename="components/mslange.cpp" line="+49"/>
        <location filename="components/msline.cpp" line="+44"/>
        <location filename="components/msopen.cpp" line="+42"/>
        <location filename="components/msrstub.cpp" line="+42"/>
        <source>name of substrate definition</source>
        <translation>jméno definice substrátu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/cpwgap.cpp" line="+2"/>
        <location filename="components/cpwopen.cpp" line="+2"/>
        <location filename="components/cpwshort.cpp" line="+2"/>
        <location filename="components/mscoupled.cpp" line="+2"/>
        <location filename="components/mslange.cpp" line="+2"/>
        <location filename="components/msline.cpp" line="+2"/>
        <location filename="components/msopen.cpp" line="+2"/>
        <source>width of the line</source>
        <translation>šířka vodiče</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/cpwgap.cpp" line="+2"/>
        <location filename="components/cpwopen.cpp" line="+2"/>
        <location filename="components/cpwshort.cpp" line="+2"/>
        <source>width of a gap</source>
        <translation>šířka přerušení</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/mscoupled.cpp" line="+2"/>
        <location filename="components/mslange.cpp" line="+2"/>
        <location filename="components/msline.cpp" line="+2"/>
        <source>length of the line</source>
        <translation>délka vodiče</translation>
    </message>
    <message>
        <location filename="components/dc_sim.cpp" line="+24"/>
        <location line="+58"/>
        <source>dc simulation</source>
        <translation>DC simulace</translation>
    </message>
    <message>
        <location filename="components/dcblock.cpp" line="+22"/>
        <source>dc block</source>
        <translation>DC blokace</translation>
    </message>
    <message>
        <location filename="components/dcfeed.cpp" line="+23"/>
        <source>dc feed</source>
        <translation>DC přívod</translation>
    </message>
    <message>
        <location filename="components/diode.cpp" line="+23"/>
        <source>diode</source>
        <translation>dioda</translation>
    </message>
    <message>
        <location filename="components/equation.cpp" line="+25"/>
        <source>equation</source>
        <translation>rovnice</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+49"/>
        <source>Equation</source>
        <translation>Rovnice</translation>
    </message>
    <message>
        <location filename="components/ground.cpp" line="+25"/>
        <source>ground (reference potential)</source>
        <translation>zem (referenční potenciál)</translation>
    </message>
    <message>
        <location filename="components/gyrator.cpp" line="-34"/>
        <source>gyrator (impedance inverter)</source>
        <translation>gyrátor (impedanční negátor)</translation>
    </message>
    <message>
        <location line="+32"/>
        <source>gyrator ratio</source>
        <translation>gyrátorový poměr</translation>
    </message>
    <message>
        <location filename="components/hb_sim.cpp" line="+24"/>
        <source>Harmonic balance simulation</source>
        <translation>Harmonic balance simulace</translation>
    </message>
    <message>
        <location filename="components/am_modulator.cpp" line="+54"/>
        <location filename="components/ampere_ac.cpp" line="+48"/>
        <location filename="components/hb_sim.cpp" line="+19"/>
        <location filename="components/pm_modulator.cpp" line="+54"/>
        <location filename="components/source_ac.cpp" line="+65"/>
        <location filename="components/volt_ac.cpp" line="+48"/>
        <source>frequency in Hertz</source>
        <translation>frekvence v Hertzích</translation>
    </message>
    <message>
        <location filename="components/hb_sim.cpp" line="+2"/>
        <source>number of harmonics</source>
        <translation>počet harmonických</translation>
    </message>
    <message>
        <location filename="components/inductor.cpp" line="+23"/>
        <source>inductor</source>
        <translation>cívka</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>inductance in Henry</source>
        <translation>induktivita v Henrech</translation>
    </message>
    <message>
        <location filename="components/iprobe.cpp" line="+23"/>
        <source>current probe</source>
        <translation>Ampérmetr</translation>
    </message>
    <message>
        <location filename="components/isolator.cpp" line="+23"/>
        <source>isolator</source>
        <translation>izolátor</translation>
    </message>
    <message>
        <location filename="components/amplifier.cpp" line="+46"/>
        <location filename="components/isolator.cpp" line="+26"/>
        <source>reference impedance of input port</source>
        <translation>referenční impedance vstupního portu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/isolator.cpp" line="+2"/>
        <source>reference impedance of output port</source>
        <translation>referenční impedance výstupního portu</translation>
    </message>
    <message>
        <location filename="components/mscorner.cpp" line="+23"/>
        <source>microstrip corner</source>
        <translation>úhel mikropásku</translation>
    </message>
    <message>
        <location filename="components/bondwire.cpp" line="+56"/>
        <location filename="components/mscorner.cpp" line="+23"/>
        <location filename="components/mscross.cpp" line="+29"/>
        <location filename="components/msmbend.cpp" line="+47"/>
        <location filename="components/msstep.cpp" line="+50"/>
        <location filename="components/mstee.cpp" line="+35"/>
        <location filename="components/msvia.cpp" line="+45"/>
        <source>substrate</source>
        <translation>substrát</translation>
    </message>
    <message>
        <location filename="components/cpwstep.cpp" line="+2"/>
        <location filename="components/mscross.cpp" line="+2"/>
        <location filename="components/mstee.cpp" line="+2"/>
        <source>width of line 1</source>
        <translation>šířka vedení 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/mscross.cpp" line="+2"/>
        <location filename="components/mstee.cpp" line="+2"/>
        <source>width of line 2</source>
        <translation>šířka vedení 2</translation>
    </message>
    <message>
        <location filename="components/mscoupled.cpp" line="-38"/>
        <source>coupled microstrip line</source>
        <translation>svázané mikropáskové vedení</translation>
    </message>
    <message>
        <location line="+40"/>
        <location filename="components/mslange.cpp" line="+2"/>
        <source>spacing between the lines</source>
        <translation>odstup mezi vedeními</translation>
    </message>
    <message>
        <location filename="components/mscross.cpp" line="-10"/>
        <source>microstrip cross</source>
        <translation>Mikropáskové křížení</translation>
    </message>
    <message>
        <location line="+12"/>
        <location filename="components/mstee.cpp" line="+2"/>
        <source>width of line 3</source>
        <translation>šířka vedení 3</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>width of line 4</source>
        <translation>šířka vedení 4</translation>
    </message>
    <message>
        <location filename="components/msline.cpp" line="-25"/>
        <source>microstrip line</source>
        <translation>mikropáskové vedení</translation>
    </message>
    <message>
        <location filename="components/msstep.cpp" line="-27"/>
        <source>microstrip impedance step</source>
        <translation>Mikropáskový impedanční krok</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>width 1 of the line</source>
        <translation>šířka vedení 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>width 2 of the line</source>
        <translation>šířka vedení 2</translation>
    </message>
    <message>
        <location filename="components/mstee.cpp" line="-18"/>
        <source>microstrip tee</source>
        <translation>T rozbočení mikropáskového vedení</translation>
    </message>
    <message>
        <location filename="components/param_sweep.cpp" line="+24"/>
        <location line="+44"/>
        <source>Parameter sweep</source>
        <translation>Variace parametru</translation>
    </message>
    <message>
        <location line="-20"/>
        <source>parameter to sweep</source>
        <translation>parametr k variaci</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>start value for sweep</source>
        <translation>počáteční hodnota variace</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>stop value for sweep</source>
        <translation>konečná hodnota variace</translation>
    </message>
    <message>
        <source>step size for sweep</source>
        <translation type="obsolete">velikost kroku pro variaci</translation>
    </message>
    <message>
        <source>resistor (US symbol)</source>
        <translation type="obsolete">odpor (US symbol)</translation>
    </message>
    <message>
        <location filename="components/sp_sim.cpp" line="-28"/>
        <source>S parameter simulation</source>
        <translation>S parametr simulace</translation>
    </message>
    <message>
        <location filename="components/sparamfile.cpp" line="+28"/>
        <source>S parameter file</source>
        <translation>S-parametrový soubor</translation>
    </message>
    <message>
        <location line="+127"/>
        <source>file</source>
        <translation>soubor</translation>
    </message>
    <message>
        <location line="-120"/>
        <source>name of the s parameter file</source>
        <translation>Jméno souboru s S-parametry</translation>
    </message>
    <message>
        <location filename="components/subcircuit.cpp" line="+41"/>
        <source>subcircuit</source>
        <translation>podobvod</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>name of qucs schematic file</source>
        <translation>Jméno souboru elektrického schématu formátu Qucs</translation>
    </message>
    <message>
        <location filename="components/subcirport.cpp" line="+26"/>
        <source>port of a subcircuit</source>
        <translation>port podobvodu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>number of the port within the subcircuit</source>
        <translation>číslo portu uvnitř podobvodu</translation>
    </message>
    <message>
        <location filename="components/substrate.cpp" line="+23"/>
        <source>substrate definition</source>
        <translation>definice substrátu</translation>
    </message>
    <message>
        <source>permittivity</source>
        <translation type="obsolete">permitivita</translation>
    </message>
    <message>
        <location line="+38"/>
        <source>thickness in meters</source>
        <translation>výška v metrech</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>thickness of metalization</source>
        <translation>tloušťka pokovení</translation>
    </message>
    <message>
        <location filename="components/coaxialline.cpp" line="+57"/>
        <location filename="components/rectline.cpp" line="+60"/>
        <location filename="components/substrate.cpp" line="+2"/>
        <location filename="components/twistedpair.cpp" line="+73"/>
        <source>loss tangent</source>
        <translation>dielektrický ztrátový úhel</translation>
    </message>
    <message>
        <location filename="components/symtrafo.cpp" line="+23"/>
        <source>ideal symmetrical transformer</source>
        <translation>ideální symetrický transformátor</translation>
    </message>
    <message>
        <location filename="components/tline.cpp" line="+23"/>
        <source>ideal transmission line</source>
        <translation>ideální přenosové vedení</translation>
    </message>
    <message>
        <location line="+26"/>
        <location filename="components/tline_4port.cpp" line="+53"/>
        <source>characteristic impedance</source>
        <translation>charakteristická impedance</translation>
    </message>
    <message>
        <location filename="components/ctline.cpp" line="+59"/>
        <location filename="components/rlcg.cpp" line="+63"/>
        <location filename="components/tline.cpp" line="+2"/>
        <location filename="components/tline_4port.cpp" line="+2"/>
        <source>electrical length of the line</source>
        <translation>elektrická dálka vedení</translation>
    </message>
    <message>
        <location filename="components/tr_sim.cpp" line="+24"/>
        <source>transient simulation</source>
        <translation>přechodová simulace</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>start time in seconds</source>
        <translation>čas spuštění v sekundách</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>stop time in seconds</source>
        <translation>čas zastavení v sekundách</translation>
    </message>
    <message>
        <source>time step in seconds</source>
        <translation type="obsolete">časový krok v sekundách</translation>
    </message>
    <message>
        <location filename="components/transformer.cpp" line="+23"/>
        <source>ideal transformer</source>
        <translation>ideální transformátor</translation>
    </message>
    <message>
        <location filename="components/vccs.cpp" line="-41"/>
        <source>voltage controlled current source</source>
        <translation>napěťově řízený zdroj proudu</translation>
    </message>
    <message>
        <location line="+40"/>
        <source>forward transconductance</source>
        <translation>dopředná konduktance</translation>
    </message>
    <message>
        <location filename="components/vcresistor.cpp" line="+23"/>
        <location filename="components/vcvs.cpp" line="-42"/>
        <source>voltage controlled voltage source</source>
        <translation>napěťově řízený zdroj napětí</translation>
    </message>
    <message>
        <location line="+47"/>
        <source>resistance gain</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Voltage Controlled Resistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/volt_ac.cpp" line="-25"/>
        <source>ideal ac voltage source</source>
        <translation>ideální zdroj AC napětí</translation>
    </message>
    <message>
        <source>rms voltage in Volts</source>
        <translation type="obsolete">efektivní napětí ve voltech</translation>
    </message>
    <message>
        <location filename="components/volt_dc.cpp" line="+23"/>
        <source>ideal dc voltage source</source>
        <translation>ideální zdroj DC napětí</translation>
    </message>
    <message>
        <location filename="components/ecvs.cpp" line="+23"/>
        <source>externally controlled voltage source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+45"/>
        <location filename="components/volt_dc.cpp" line="+22"/>
        <source>voltage in Volts</source>
        <translation>Napětí ve voltech</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Externally Controlled Voltage Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/volt_noise.cpp" line="-29"/>
        <source>noise voltage source</source>
        <translation>zdroj rušivého napětí</translation>
    </message>
    <message>
        <source>equivalent voltage density in V/sqrt(Hz)</source>
        <translation type="obsolete">ekvivalentní napěťová hustota ve V/sqrt(Hz)</translation>
    </message>
    <message>
        <location filename="components/phaseshifter.cpp" line="-26"/>
        <source>phase shifter</source>
        <translation>fázový posunovač</translation>
    </message>
    <message>
        <location filename="components/hybrid.cpp" line="-2"/>
        <location filename="components/phaseshifter.cpp" line="+24"/>
        <source>phase shift in degree</source>
        <translation>fázové posunutí ve stupních</translation>
    </message>
    <message>
        <location filename="components/source_ac.cpp" line="-42"/>
        <source>ac power source</source>
        <translation>zdroj AC signálu</translation>
    </message>
    <message>
        <location filename="components/digi_source.cpp" line="+53"/>
        <location filename="components/source_ac.cpp" line="+36"/>
        <source>number of the port</source>
        <translation>číslo portu</translation>
    </message>
    <message>
        <location filename="components/source_ac.cpp" line="+2"/>
        <source>port impedance</source>
        <translation>impedační port</translation>
    </message>
    <message>
        <source>ac power in Watts</source>
        <translation type="obsolete">AC výkon ve Wattech</translation>
    </message>
    <message>
        <source>Create new project</source>
        <translation type="obsolete">Vytvořit nový projekt</translation>
    </message>
    <message>
        <source>Project name:</source>
        <translation type="obsolete">Jméno projektu:</translation>
    </message>
    <message>
        <source>open new project</source>
        <translation type="obsolete">otevřít nový projekt</translation>
    </message>
    <message>
        <source>Create</source>
        <translation type="obsolete">Vytvořit</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Zrušit</translation>
    </message>
    <message>
        <location filename="components/substrate.cpp" line="-6"/>
        <source>relative permittivity</source>
        <translation>relativní permitivita</translation>
    </message>
    <message>
        <location filename="components/symtrafo.cpp" line="+52"/>
        <source>voltage transformation ratio of coil 1</source>
        <translation>transformační poměr napětí jádra 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>voltage transformation ratio of coil 2</source>
        <translation>transformační poměr napětí jádra 2</translation>
    </message>
    <message>
        <location filename="components/transformer.cpp" line="+38"/>
        <source>voltage transformation ratio</source>
        <translation>transformační poměr napětí</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="+132"/>
        <location filename="components/bjtsub.cpp" line="+27"/>
        <location filename="components/diac.cpp" line="+53"/>
        <location filename="components/diode.cpp" line="+3"/>
        <location filename="components/thyristor.cpp" line="+53"/>
        <location filename="components/triac.cpp" line="+57"/>
        <source>saturation current</source>
        <translation>saturační proud</translation>
    </message>
    <message>
        <location filename="components/msmbend.cpp" line="-24"/>
        <source>microstrip mitered bend</source>
        <translation>oříznutý mikropásek</translation>
    </message>
    <message>
        <location filename="components/msopen.cpp" line="-21"/>
        <source>microstrip open</source>
        <translation>otevřené mikropáskové vedení</translation>
    </message>
    <message>
        <source>ideality coefficient</source>
        <translation type="obsolete">faktor ideality</translation>
    </message>
    <message>
        <location filename="components/component.cpp" line="+237"/>
        <source>Format Error:
Wrong line start!</source>
        <translation>Chyba formátu:
Neplatný začátek řádku!</translation>
    </message>
    <message>
        <location filename="components/attenuator.cpp" line="-2"/>
        <source>power attenuation</source>
        <translation>výkonový útlum</translation>
    </message>
    <message>
        <location filename="components/param_sweep.cpp" line="-8"/>
        <source>simulation to perform parameter sweep on</source>
        <translation>simulace pro variaci parametru</translation>
    </message>
    <message>
        <source>Cannot get size of independent data &quot;</source>
        <translation type="obsolete">Neznámá délka nezávislé datové řady &quot;</translation>
    </message>
    <message>
        <source>Too few dependent data &quot;</source>
        <translation type="obsolete">Příliš málo záznamů v datové řadě &quot;</translation>
    </message>
    <message>
        <source>Independent data &quot;</source>
        <translation type="obsolete">Nezávislá datová řada &quot;</translation>
    </message>
    <message>
        <source>&quot; not found</source>
        <translation type="obsolete">&quot; nenalezena</translation>
    </message>
    <message>
        <source>microstrip model (Kirschning,Kobayashi,Yamashita)</source>
        <translation type="obsolete">mikropáskový model (Kirschning,Kobayashi,Yamashita)</translation>
    </message>
    <message>
        <location filename="diagrams/marker.cpp" line="+285"/>
        <location filename="diagrams/tabdiagram.cpp" line="+246"/>
        <source>invalid</source>
        <translation>neplatný</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-2"/>
        <location filename="components/diac.cpp" line="+2"/>
        <location filename="components/diode.cpp" line="+2"/>
        <location filename="components/thyristor.cpp" line="+2"/>
        <location filename="components/triac.cpp" line="+2"/>
        <source>emission coefficient</source>
        <translation>koeficient ideality</translation>
    </message>
    <message>
        <location line="+14"/>
        <location filename="components/diode.cpp" line="+2"/>
        <location filename="components/photodiode.cpp" line="+35"/>
        <source>zero-bias junction capacitance</source>
        <translation>kapacita v závěrném směru při 0V</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/MESFET.cpp" line="+79"/>
        <location filename="components/diode.cpp" line="+2"/>
        <location filename="components/photodiode.cpp" line="+3"/>
        <location filename="components/tunneldiode.cpp" line="+45"/>
        <source>grading coefficient</source>
        <translation>koeficient gradace</translation>
    </message>
    <message>
        <location line="-6"/>
        <location filename="components/diode.cpp" line="+2"/>
        <location filename="components/photodiode.cpp" line="-6"/>
        <location filename="components/tunneldiode.cpp" line="+2"/>
        <source>junction potential</source>
        <translation>potenciál v závěrném směru</translation>
    </message>
    <message>
        <source>microstrip model |Kirschning|Kobayashi|Yamashita</source>
        <translation type="obsolete">mikropáskový model |Kirschning|Kobayashi|Yamashita</translation>
    </message>
    <message>
        <location filename="components/substrate.cpp" line="+8"/>
        <source>specific resistance of metal</source>
        <translation>specifický odpor kovu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>rms substrate roughness</source>
        <translation>efektivní povrchová drsnost</translation>
    </message>
    <message>
        <source>Too few independent data &quot;</source>
        <translation type="obsolete">Příliš málo hodnot v datové řadě &quot;</translation>
    </message>
    <message>
        <location filename="components/ampere_ac.cpp" line="-25"/>
        <source>ideal ac current source</source>
        <translation>ideální Zdroj AC proudu</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="-47"/>
        <location filename="../qucs-help/main.cpp" line="+104"/>
        <source>Warning</source>
        <translation>Varování</translation>
    </message>
    <message>
        <location filename="../qucs-help/main.cpp" line="+1"/>
        <source>Cannot save settings !</source>
        <translation>Nastavení nelze uložit!</translation>
    </message>
    <message>
        <source>npn bipolar junction transistor</source>
        <translation type="obsolete">npn bipolární tranzistor</translation>
    </message>
    <message>
        <source>polarity (npn,pnp)</source>
        <translation type="obsolete">Polarita (npn,pnp)</translation>
    </message>
    <message>
        <location filename="components/jfet.cpp" line="+23"/>
        <source>junction field-effect transistor</source>
        <translation>polem řízený tranzistor s pn přechody</translation>
    </message>
    <message>
        <source>polarity (n,p)</source>
        <translation type="obsolete">polarita (n,p)</translation>
    </message>
    <message>
        <location filename="components/mosfet.cpp" line="+25"/>
        <source>MOS field-effect transistor</source>
        <translation>MOS polem řízený tranzistor</translation>
    </message>
    <message>
        <location filename="components/hb_sim.cpp" line="+22"/>
        <source>Harmonic balance</source>
        <translation>Harmonic balance</translation>
    </message>
    <message>
        <location filename="components/sp_sim.cpp" line="+57"/>
        <source>S-parameter simulation</source>
        <translation>S parameter simulace</translation>
    </message>
    <message>
        <location filename="components/tr_sim.cpp" line="+50"/>
        <source>Transient simulation</source>
        <translation>Přechodová simulace</translation>
    </message>
    <message>
        <location filename="components/ampere_ac.cpp" line="+45"/>
        <source>ac Current Source</source>
        <translation>zdroj AC proudu</translation>
    </message>
    <message>
        <location filename="components/ampere_dc.cpp" line="+16"/>
        <source>dc Current Source</source>
        <translation>zdroj DC proudu</translation>
    </message>
    <message>
        <location filename="components/ampere_noise.cpp" line="+16"/>
        <source>Noise Current Source</source>
        <translation>Zdroj rušivého proudu</translation>
    </message>
    <message>
        <location filename="components/attenuator.cpp" line="+18"/>
        <source>Attenuator</source>
        <translation>Útlumový člen</translation>
    </message>
    <message>
        <location filename="components/biast.cpp" line="+49"/>
        <source>Bias T</source>
        <translation>Bias T</translation>
    </message>
    <message>
        <location filename="components/bjt.cpp" line="+44"/>
        <location filename="components/bjtsub.cpp" line="+118"/>
        <source>npn transistor</source>
        <translation>npn tranzistor</translation>
    </message>
    <message>
        <location filename="components/capacitor.cpp" line="+20"/>
        <source>Capacitor</source>
        <translation>Kondenzátor</translation>
    </message>
    <message>
        <location filename="components/cccs.cpp" line="+14"/>
        <source>Current Controlled Current Source</source>
        <translation>proudově řízený zdroj proudu</translation>
    </message>
    <message>
        <location filename="components/ccvs.cpp" line="+54"/>
        <source>Current Controlled Voltage Source</source>
        <translation>proudově řízený zdroj napětí</translation>
    </message>
    <message>
        <location filename="components/circulator.cpp" line="+14"/>
        <source>Circulator</source>
        <translation>Cirkulátor</translation>
    </message>
    <message>
        <location filename="components/coplanar.cpp" line="+20"/>
        <source>Coplanar Line</source>
        <translation>Koplanární vedení</translation>
    </message>
    <message>
        <location filename="components/dcblock.cpp" line="+38"/>
        <source>dc Block</source>
        <translation>DC uzávěra</translation>
    </message>
    <message>
        <location filename="components/dcfeed.cpp" line="+39"/>
        <source>dc Feed</source>
        <translation>DC přívod</translation>
    </message>
    <message>
        <location filename="components/diode.cpp" line="+64"/>
        <source>Diode</source>
        <translation>Dioda</translation>
    </message>
    <message>
        <location filename="components/ground.cpp" line="+30"/>
        <source>Ground</source>
        <translation>Země</translation>
    </message>
    <message>
        <location filename="components/gyrator.cpp" line="+16"/>
        <source>Gyrator</source>
        <translation>Gyrátor</translation>
    </message>
    <message>
        <location filename="components/inductor.cpp" line="+16"/>
        <source>Inductor</source>
        <translation>Cívka</translation>
    </message>
    <message>
        <location filename="components/iprobe.cpp" line="+44"/>
        <source>Current Probe</source>
        <translation>Ampérmetr</translation>
    </message>
    <message>
        <location filename="components/isolator.cpp" line="+16"/>
        <source>Isolator</source>
        <translation>Isolátor</translation>
    </message>
    <message>
        <location filename="components/jfet.cpp" line="+71"/>
        <source>n-JFET</source>
        <translation>n-JFET</translation>
    </message>
    <message>
        <location filename="components/mosfet.cpp" line="+20"/>
        <location filename="components/mosfet_sub.cpp" line="+147"/>
        <source>n-MOSFET</source>
        <translation>n-MOSFET</translation>
    </message>
    <message>
        <location filename="components/mscorner.cpp" line="+16"/>
        <source>Microstrip Corner</source>
        <translation>Úhel mikropásku</translation>
    </message>
    <message>
        <location filename="components/mscoupled.cpp" line="+21"/>
        <source>Coupled Microstrip Line</source>
        <translation>svázané mikropásková vedení</translation>
    </message>
    <message>
        <location filename="components/mscross.cpp" line="+25"/>
        <source>Microstrip Cross</source>
        <translation>Mikropáskové křížení</translation>
    </message>
    <message>
        <location filename="components/msline.cpp" line="+47"/>
        <source>Microstrip Line</source>
        <translation>Mikropáskové vedení</translation>
    </message>
    <message>
        <location filename="components/msmbend.cpp" line="+40"/>
        <source>Microstrip Mitered Bend</source>
        <translation>Oříznutý mikropásek</translation>
    </message>
    <message>
        <location filename="components/msopen.cpp" line="+44"/>
        <source>Microstrip Open</source>
        <translation>Otevřené mikropáskové vedení</translation>
    </message>
    <message>
        <location filename="components/msstep.cpp" line="+20"/>
        <source>Microstrip Step</source>
        <translation>Odstup mikropásku</translation>
    </message>
    <message>
        <location filename="components/mstee.cpp" line="+45"/>
        <source>Microstrip Tee</source>
        <translation>Mikropáskové T rozdvojení</translation>
    </message>
    <message>
        <location filename="components/phaseshifter.cpp" line="+16"/>
        <source>Phase Shifter</source>
        <translation>Fázový posunovač</translation>
    </message>
    <message>
        <location filename="components/resistor.cpp" line="+61"/>
        <source>Resistor</source>
        <translation>Odpor</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Resistor US</source>
        <translation>Odpor US</translation>
    </message>
    <message>
        <location filename="components/source_ac.cpp" line="+22"/>
        <source>Power Source</source>
        <translation>Zdroj signálu</translation>
    </message>
    <message>
        <location filename="components/sparamfile.cpp" line="+44"/>
        <source>1-port S parameter file</source>
        <translation>1-port S-parametr soubor</translation>
    </message>
    <message>
        <location filename="components/subcircuit.cpp" line="+21"/>
        <source>Subcircuit</source>
        <translation>Podobvod</translation>
    </message>
    <message>
        <location filename="components/subcirport.cpp" line="+64"/>
        <source>Subcircuit Port</source>
        <translation>Port podobvodu</translation>
    </message>
    <message>
        <location filename="components/substrate.cpp" line="+14"/>
        <source>Substrate</source>
        <translation>Substrát</translation>
    </message>
    <message>
        <location filename="components/symtrafo.cpp" line="+14"/>
        <source>symmetric Transformer</source>
        <translation>symetrický transformátor</translation>
    </message>
    <message>
        <location filename="components/tline.cpp" line="+18"/>
        <source>Transmission Line</source>
        <translation>Přenosové vedení</translation>
    </message>
    <message>
        <location filename="components/transformer.cpp" line="+14"/>
        <source>Transformer</source>
        <translation>Transformátor</translation>
    </message>
    <message>
        <location filename="components/vccs.cpp" line="+15"/>
        <source>Voltage Controlled Current Source</source>
        <translation>napěťově řízený zdroj proudu</translation>
    </message>
    <message>
        <location filename="components/vcvs.cpp" line="+56"/>
        <source>Voltage Controlled Voltage Source</source>
        <translation>napěťově řízený zdroj napětí</translation>
    </message>
    <message>
        <location filename="components/volt_ac.cpp" line="+45"/>
        <source>ac Voltage Source</source>
        <translation>zdroj AC napětí</translation>
    </message>
    <message>
        <location filename="components/volt_dc.cpp" line="+16"/>
        <source>dc Voltage Source</source>
        <translation>zdroj DC napětí</translation>
    </message>
    <message>
        <location filename="components/volt_noise.cpp" line="+45"/>
        <source>Noise Voltage Source</source>
        <translation>zdroj rušivého napětí</translation>
    </message>
    <message>
        <location filename="components/bjt.cpp" line="+10"/>
        <location filename="components/bjtsub.cpp" line="+10"/>
        <source>pnp transistor</source>
        <translation>pnp tranzistor</translation>
    </message>
    <message>
        <location filename="components/jfet.cpp" line="+10"/>
        <source>p-JFET</source>
        <translation>p-JFET</translation>
    </message>
    <message>
        <location filename="components/mosfet.cpp" line="+10"/>
        <location filename="components/mosfet_sub.cpp" line="+11"/>
        <source>p-MOSFET</source>
        <translation>p-MOSFET</translation>
    </message>
    <message>
        <source>depletion MOS field-effect transistor</source>
        <translation type="obsolete">MOS polem řízený tranzistor (depletion)</translation>
    </message>
    <message>
        <location line="+16"/>
        <location filename="components/mosfet_sub.cpp" line="+17"/>
        <source>depletion MOSFET</source>
        <translation>MOSFET (depletion)</translation>
    </message>
    <message>
        <location filename="components/diode.cpp" line="-54"/>
        <source>ohmic series resistance</source>
        <translation>ohmický sériový odpor</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="+12"/>
        <location filename="components/diode.cpp" line="+2"/>
        <location filename="components/photodiode.cpp" line="+15"/>
        <source>transit time</source>
        <translation>přechodová doba</translation>
    </message>
    <message>
        <location filename="components/jfet.cpp" line="-75"/>
        <location filename="components/nigbt.cpp" line="+60"/>
        <source>threshold voltage</source>
        <translation>prahové napětí</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-99"/>
        <location filename="components/MESFET.cpp" line="-56"/>
        <location filename="components/jfet.cpp" line="+2"/>
        <source>transconductance parameter</source>
        <translation>transkonduktační parametr</translation>
    </message>
    <message>
        <location filename="components/jfet.cpp" line="+2"/>
        <source>channel-length modulation parameter</source>
        <translation>parameter pro modulaci délky kanálu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>parasitic drain resistance</source>
        <translation>parasitní drain odpor</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>parasitic source resistance</source>
        <translation>parasitní source odpor</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-junction saturation current</source>
        <translation>saturační proud Gate přechodu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-junction emission coefficient</source>
        <translation>faktor ideality Gate přechodu</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>zero-bias gate-source junction capacitance</source>
        <translation>kapacita závěrného Gate-Source přechodu při 0 voltech</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias gate-drain junction capacitance</source>
        <translation>kapacita závěrného Gate-Drain přechodu při 0 voltech</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-junction potential</source>
        <translation>potenciál závěrného Gate přechodu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>forward-bias junction capacitance coefficient</source>
        <translation>linearizační koeficient kapacity závěrného přechodu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate P-N grading coefficient</source>
        <translation>gradační koeficient Gate přechodu</translation>
    </message>
    <message>
        <source>schematic symbol (european,US)</source>
        <translation type="obsolete">symbol v elektrickém schématu (evropský,US)</translation>
    </message>
    <message>
        <source>polarity (nfet,pfet)</source>
        <translation type="obsolete">polarita (nfet,pfet)</translation>
    </message>
    <message>
        <location line="-12"/>
        <source>gate-junction recombination current parameter</source>
        <translation>emisní faktor neideálního Gate proudu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Isr emission coefficient</source>
        <translation>Emisní faktor Isr</translation>
    </message>
    <message>
        <location filename="components/attenuator.cpp" line="-14"/>
        <location filename="components/bjtsub.cpp" line="-60"/>
        <location filename="components/bondwire.cpp" line="+2"/>
        <location filename="components/coaxialline.cpp" line="+2"/>
        <location filename="components/ctline.cpp" line="+10"/>
        <location filename="components/dc_sim.cpp" line="-34"/>
        <location filename="components/diode.cpp" line="+14"/>
        <location filename="components/etr_sim.cpp" line="+60"/>
        <location filename="components/isolator.cpp" line="-14"/>
        <location filename="components/jfet.cpp" line="+18"/>
        <location filename="components/mosfet_sub.cpp" line="-57"/>
        <location filename="components/mscoupled.cpp" line="-14"/>
        <location filename="components/mslange.cpp" line="+7"/>
        <location filename="components/msline.cpp" line="-14"/>
        <location filename="components/msvia.cpp" line="+4"/>
        <location filename="components/rectline.cpp" line="+4"/>
        <location filename="components/relais.cpp" line="+68"/>
        <location filename="components/resistor.cpp" line="-69"/>
        <location filename="components/rlcg.cpp" line="+2"/>
        <location filename="components/source_ac.cpp" line="-16"/>
        <location filename="components/switch.cpp" line="+36"/>
        <location filename="components/tline.cpp" line="-14"/>
        <location filename="components/tline_4port.cpp" line="+4"/>
        <location filename="components/tr_sim.cpp" line="-29"/>
        <location filename="components/tunneldiode.cpp" line="+5"/>
        <location filename="components/twistedpair.cpp" line="+2"/>
        <source>simulation temperature in degree Celsius</source>
        <translation>teplota při simulaci ve °C</translation>
    </message>
    <message>
        <location filename="components/dc_sim.cpp" line="+2"/>
        <location filename="components/etr_sim.cpp" line="-6"/>
        <location filename="components/hb_sim.cpp" line="-16"/>
        <location filename="components/tr_sim.cpp" line="-6"/>
        <source>relative tolerance for convergence</source>
        <translation>relativení tolerance pro konvergenci</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/etr_sim.cpp" line="+2"/>
        <location filename="components/hb_sim.cpp" line="-4"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>absolute tolerance for currents</source>
        <translation>absolutní tolerance pro proudy</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/etr_sim.cpp" line="+2"/>
        <location filename="components/hb_sim.cpp" line="+2"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>absolute tolerance for voltages</source>
        <translation>absolutní tolerance pro napětí</translation>
    </message>
    <message>
        <source>put operating points into dataset (yes,no)</source>
        <translation type="obsolete">zobrazit pracovní bod v datové řadě (ano,ne)</translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="components/etr_sim.cpp" line="-6"/>
        <location filename="components/hb_sim.cpp" line="+4"/>
        <location filename="components/tr_sim.cpp" line="-6"/>
        <source>maximum number of iterations until error</source>
        <translation>maximální počet iterací</translation>
    </message>
    <message>
        <source>put result into dataset (yes,no)</source>
        <translation type="obsolete">výsledek zobrazit v datové řadě (ano,ne)</translation>
    </message>
    <message>
        <source>quasi-static microstrip model (Hammerstad,Wheeler,Schneider)</source>
        <translation type="obsolete">kvazi-statický mikropáskový model (Hammerstad,Wheeler,Schneider)</translation>
    </message>
    <message>
        <source>microstrip dispersion model (Kirschning,Kobayashi,Yamashita,Hammerstad,Getsinger,Schneider,Pramanick)</source>
        <translation type="obsolete">mikropáskový disperzní model (Kirschning,Kobayashi,Yamashita,Hammerstad,Getsinger,Schneider,Pramanick)</translation>
    </message>
    <message>
        <source>calculate noise parameters (yes,no)</source>
        <translation type="obsolete">spočítat parametr rušení (ano,ne)</translation>
    </message>
    <message>
        <location filename="components/sp_sim.cpp" line="-22"/>
        <source>input port for noise figure</source>
        <translation>vstupní port pro číslo rušení</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>output port for noise figure</source>
        <translation>výstupní port pro číslo rušení</translation>
    </message>
    <message>
        <source>sweep type (lin,log)</source>
        <translation type="obsolete">typ variace parametru (lin,log)</translation>
    </message>
    <message>
        <location filename="components/ac_sim.cpp" line="+2"/>
        <location filename="components/param_sweep.cpp" line="+10"/>
        <location filename="components/sp_sim.cpp" line="-7"/>
        <source>number of simulation steps</source>
        <translation>počet simulačních kroků</translation>
    </message>
    <message>
        <source>npn bipolar junction transistor with substrate</source>
        <translation type="obsolete">bipolární npn tranzistor s připojením substrátu</translation>
    </message>
    <message>
        <location filename="components/msgap.cpp" line="-28"/>
        <source>microstrip gap</source>
        <translation>mikropásková mezera</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>width of the line 1</source>
        <translation>šířka vedení 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>width of the line 2</source>
        <translation>šířka vedení 2</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Microstrip Gap</source>
        <translation>mikropásková mezera</translation>
    </message>
    <message>
        <location filename="components/mscorner.cpp" line="-14"/>
        <location filename="components/msmbend.cpp" line="-14"/>
        <source>width of line</source>
        <translation>šířka pásku</translation>
    </message>
    <message>
        <location filename="components/bjtsub.cpp" line="-66"/>
        <location filename="components/phototransistor.cpp" line="+25"/>
        <source>forward emission coefficient</source>
        <translation>emisní koeficient v propustném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="+2"/>
        <source>reverse emission coefficient</source>
        <translation>zpětný emisní koeficient</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="+30"/>
        <source>high current corner for forward beta</source>
        <translation>zlomová hodnota proudu v propustném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="+3"/>
        <source>high current corner for reverse beta</source>
        <translation>zlomová hodnota pro proud v závěrném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="-31"/>
        <source>forward early voltage</source>
        <translation>Early napětí v propustném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="+3"/>
        <source>reverse early voltage</source>
        <translation>Early napětí v závěrném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>base-emitter leakage saturation current</source>
        <translation>neideální saturační Basis-Emitter proud</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>base-emitter leakage emission coefficient</source>
        <translation>emisní faktor pro neideální proud BE diody</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>base-collector leakage saturation current</source>
        <translation>neideální Basis-Kolektor saturační proud</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>base-collector leakage emission coefficient</source>
        <translation>emisní faktor pro neideální proud BC diody</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="-14"/>
        <source>forward beta</source>
        <translation>ideální proudové zesílení v propustném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="+2"/>
        <source>reverse beta</source>
        <translation>ideální proudové zesílení v závěrném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>minimum base resistance for high currents</source>
        <translation>minimální odpor báze při velkých proudech</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>current for base resistance midpoint</source>
        <translation>proud báze pro střední odpor báze</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>collector ohmic resistance</source>
        <translation>odpor kolektoru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>emitter ohmic resistance</source>
        <translation>odpor emitoru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias base resistance (may be high-current dependent)</source>
        <translation>konstantní odpor báze</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="+20"/>
        <source>base-emitter zero-bias depletion capacitance</source>
        <translation>kapacita závěrného BE přechodu při 0V</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="-3"/>
        <source>base-emitter junction built-in potential</source>
        <translation>BE difůzní napětí</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="-2"/>
        <source>base-emitter junction exponential factor</source>
        <translation>gradační koeficient BE</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="+13"/>
        <source>base-collector zero-bias depletion capacitance</source>
        <translation>kapacita závěrného přechodu BC při 0V</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="-3"/>
        <source>base-collector junction built-in potential</source>
        <translation>difůzní napětí BC</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="-2"/>
        <source>base-collector junction exponential factor</source>
        <translation>gradační koeficient BC</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fraction of Cjc that goes to internal base pin</source>
        <translation>dělící faktor BC</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias collector-substrate capacitance</source>
        <translation>kapacita závěrného přechodu CS při 0V</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>substrate junction built-in potential</source>
        <translation>difůzní napětí CS</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>substrate junction exponential factor</source>
        <translation>gradační koeficient CS</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="+97"/>
        <location filename="components/MESFET.cpp" line="+43"/>
        <location filename="components/bjtsub.cpp" line="+2"/>
        <location filename="components/diode.cpp" line="-24"/>
        <location filename="components/photodiode.cpp" line="-2"/>
        <source>forward-bias depletion capacitance coefficient</source>
        <translation>linearizační koeficient kapacity v závěrném směru</translation>
    </message>
    <message>
        <location filename="components/bjtsub.cpp" line="+2"/>
        <location filename="components/phototransistor.cpp" line="+11"/>
        <source>ideal forward transit time</source>
        <translation>ideální přechodový čas v propustném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>coefficient of bias-dependence for Tf</source>
        <translation>koeficient proudové závislosti pro Tf</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>voltage dependence of Tf on base-collector voltage</source>
        <translation>koeficient napěťové závislosti pro Tf</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>high-current effect on Tf</source>
        <translation>vztažný proud proudové závislosti pro Tf</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/phototransistor.cpp" line="-3"/>
        <source>ideal reverse transit time</source>
        <translation>ideální závěrný přechodový čas</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-34"/>
        <location filename="components/MESFET.cpp" line="+78"/>
        <location filename="components/bjtsub.cpp" line="+4"/>
        <location filename="components/diode.cpp" line="+14"/>
        <location filename="components/hic0_full.cpp" line="+176"/>
        <location filename="components/hicumL0V1p2.cpp" line="+190"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+190"/>
        <location filename="components/hicumL0V1p3.cpp" line="+194"/>
        <location filename="components/jfet.cpp" line="-6"/>
        <location filename="components/mosfet_sub.cpp" line="-6"/>
        <location filename="components/photodiode.cpp" line="+24"/>
        <location filename="components/phototransistor.cpp" line="+21"/>
        <location line="+2"/>
        <source>flicker noise coefficient</source>
        <translation>koeficient 1/f rušení</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/MESFET.cpp" line="-2"/>
        <location filename="components/bjtsub.cpp" line="+2"/>
        <location filename="components/diode.cpp" line="+2"/>
        <location filename="components/jfet.cpp" line="+2"/>
        <location filename="components/mosfet_sub.cpp" line="+2"/>
        <location filename="components/photodiode.cpp" line="+2"/>
        <location filename="components/phototransistor.cpp" line="+2"/>
        <source>flicker noise exponent</source>
        <translation>exponent 1/f rušení</translation>
    </message>
    <message>
        <location filename="components/bjtsub.cpp" line="+2"/>
        <location filename="components/diode.cpp" line="+2"/>
        <location filename="components/jfet.cpp" line="+2"/>
        <location filename="components/mosfet_sub.cpp" line="+2"/>
        <location filename="components/photodiode.cpp" line="+2"/>
        <source>flicker noise frequency exponent</source>
        <translation>frekvenční exponent 1/f rušení</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>burst noise coefficient</source>
        <translation>koeficient burst rušení</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>burst noise exponent</source>
        <translation>exponent Burst rušení</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>burst noise corner frequency in Hertz</source>
        <translation>zlomová frekvence Burst trušení v Hertzích</translation>
    </message>
    <message>
        <location filename="components/ampere_noise.cpp" line="-22"/>
        <source>current power spectral density in A^2/Hz</source>
        <translation>spektrální proudová hustota rušení v A²/Hz</translation>
    </message>
    <message>
        <source>interpolation type (rectangular,polar)</source>
        <translation type="obsolete">interpolační prostor (pravoúhlý,polární)</translation>
    </message>
    <message>
        <location filename="components/volt_noise.cpp" line="-22"/>
        <source>voltage power spectral density in V^2/Hz</source>
        <translation>spektrální napěťová hustota ve V²/Hz</translation>
    </message>
    <message>
        <location filename="components/diode.cpp" line="-16"/>
        <source>linear capacitance</source>
        <translation>konstantní paralelní kapacita</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>recombination current parameter</source>
        <translation>rekombinační proudový parametr</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>emission coefficient for Isr</source>
        <translation>emisní koeficient od Isr</translation>
    </message>
    <message>
        <location filename="components/mosfet_sub.cpp" line="-90"/>
        <source>zero-bias threshold voltage</source>
        <translation>nulové prahové napětí</translation>
    </message>
    <message>
        <source>transconductance coefficient in A/m^2</source>
        <translation type="obsolete">transkonduktační přenosový parameter v A/m²</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>surface potential</source>
        <translation>povrchový potenciál</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>drain ohmic resistance</source>
        <translation>ohmický odpor drain přechodu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>source ohmic resistance</source>
        <translation>ohmický odpor source přechodu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate ohmic resistance</source>
        <translation>ohmický odpor metalického kontaktu Gate</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction saturation current</source>
        <translation>saturační proud substrátu v závěrném směru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction emission coefficient</source>
        <translation>emisní faktor substrátového přechodu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>channel width</source>
        <translation>šířka kanálu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>channel length</source>
        <translation>délka kanálu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>lateral diffusion length</source>
        <translation>difuzní délka překryvu Gate</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>oxide thickness</source>
        <translation>tloušťka oxidové vrtsvy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-source overlap capacitance per meter of channel width in F/m</source>
        <translation>gate-source (overlap-)kapacita na šířku kanálu ve F/m</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate-drain overlap capacitance per meter of channel width in F/m</source>
        <translation>gate-drain (overlap-)kapacita na šířku kanálu v F/m</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate-bulk overlap capacitance per meter of channel length in F/m</source>
        <translation>gate-bulk (overlap-)kapacita na délku kanálu v F/m</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero-bias bulk-drain junction capacitance</source>
        <translation type="unfinished">kapacita závěrného přechodu bulk-drain při 0V</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias bulk-source junction capacitance</source>
        <translation type="unfinished">kapacita závěrného přechodu bulk-source při 0V</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction potential</source>
        <translation>difůzní napětí závěrného přechodu substrátu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction bottom grading coefficient</source>
        <translation>gradační koeficient závěrného přechodu substrátu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk junction forward-bias depletion capacitance coefficient</source>
        <translation>koeficient kapacity závěrného přechodu pro propustný směr</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>bulk transit time</source>
        <translation>tranzitní doba pro substrát</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>substrate bulk doping density in 1/cm^3</source>
        <translation>dotační hustota substrátu v 1/cm³</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>surface state density in 1/cm^2</source>
        <translation>koeficient povrchové hustoty náboje v 1/cm²</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate material type: 0 = alumina; -1 = same as bulk; 1 = opposite to bulk</source>
        <translation>Typ gate materiálu: 0 = hliník; -1 = stejný jako substrát; 1 = opak substrátu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>surface mobility in cm^2/Vs</source>
        <translation>povrchová pohyblivost v cm²/Vs</translation>
    </message>
    <message>
        <location line="-58"/>
        <source>bulk threshold in sqrt(V)</source>
        <translation>prahové napětí substrátu v sqrt(V)</translation>
    </message>
    <message>
        <location line="+44"/>
        <source>zero-bias bulk junction periphery capacitance per meter of junction perimeter in F/m</source>
        <translation type="unfinished">kapacita bočních stěn nulového substrátu pro každý oběh v závěrném směru ve F/m při 0V</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>bulk junction periphery grading coefficient</source>
        <translation>gradační koeficient bočních stěn substrátu v závěrném směru</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>drain and source diffusion sheet resistance in Ohms/square</source>
        <translation>difůzní plošný odpor drain a source v Ohm/Quadrat</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>number of equivalent drain squares</source>
        <translation>plošný faktor drain</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>number of equivalent source squares</source>
        <translation>plošný faktor source</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>zero-bias bulk junction bottom capacitance per square meter of junction area in F/m^2</source>
        <translation type="unfinished">kapacita plochy substrátu v závěrném přechodu ve F/m² při 0V</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>bulk junction saturation current per square meter of junction area in A/m^2</source>
        <translation>saturační proudová hustota substrátu v závěrném směru v A/m²</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>drain diffusion area in m^2</source>
        <translation>difůzní plocha drain v m²</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>source diffusion area in m^2</source>
        <translation>difůzní plocha source v m²</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>drain junction perimeter</source>
        <translation>obvod závěrného přechodu drain</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>source junction perimeter</source>
        <translation>obvod závěrného přechodu source</translation>
    </message>
    <message>
        <location filename="components/msgap.cpp" line="-20"/>
        <source>spacing between the microstrip ends</source>
        <translation>Odstup mezi mikropáskovým vedením</translation>
    </message>
    <message>
        <location filename="components/mosfet_sub.cpp" line="-75"/>
        <source>channel-length modulation parameter in 1/V</source>
        <translation>parametr modulace délky kanálu v 1/V</translation>
    </message>
    <message>
        <location filename="components/bjt.cpp" line="-29"/>
        <source>bipolar junction transistor</source>
        <translation>bipolární tranzistor</translation>
    </message>
    <message>
        <location filename="components/bjtsub.cpp" line="+19"/>
        <source>bipolar junction transistor with substrate</source>
        <translation>bipolární tranzistor mit Substratanschluss</translation>
    </message>
    <message>
        <location line="-17"/>
        <source>excess phase in degrees</source>
        <translation>dodatečná fáze ve stupních</translation>
    </message>
    <message>
        <location filename="components/mscoupled.cpp" line="-5"/>
        <location filename="components/mslange.cpp" line="-5"/>
        <source>microstrip model</source>
        <translation>mikropáskový model</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/mscross.cpp" line="-20"/>
        <location filename="components/msgap.cpp" line="+5"/>
        <location filename="components/mslange.cpp" line="+2"/>
        <location filename="components/msline.cpp" line="-3"/>
        <location filename="components/msopen.cpp" line="-18"/>
        <location filename="components/msstep.cpp" line="-15"/>
        <location filename="components/mstee.cpp" line="-22"/>
        <source>microstrip dispersion model</source>
        <translation>mikropáskový disperzní model</translation>
    </message>
    <message>
        <location filename="components/ac_sim.cpp" line="-6"/>
        <location filename="components/param_sweep.cpp" line="-8"/>
        <location filename="components/sp_sim.cpp" line="-6"/>
        <location filename="components/tr_sim.cpp" line="-17"/>
        <source>sweep type</source>
        <translation>typ variace parametrů</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-100"/>
        <location filename="components/bjtsub.cpp" line="-84"/>
        <location filename="components/hic0_full.cpp" line="-157"/>
        <location filename="components/hicumL0V1p2.cpp" line="-171"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-171"/>
        <location filename="components/hicumL0V1p3.cpp" line="-175"/>
        <location filename="components/jfet.cpp" line="-34"/>
        <location filename="components/mosfet_sub.cpp" line="-11"/>
        <source>polarity</source>
        <translation>polarita</translation>
    </message>
    <message>
        <location filename="components/dc_sim.cpp" line="-3"/>
        <source>put operating points into dataset</source>
        <translation>zapsat operační body do datové sady</translation>
    </message>
    <message>
        <location filename="components/equation.cpp" line="-36"/>
        <source>put result into dataset</source>
        <translation>výsledek zapsat do datové sady</translation>
    </message>
    <message>
        <location filename="components/mscross.cpp" line="-3"/>
        <location filename="components/msgap.cpp" line="-3"/>
        <location filename="components/msline.cpp" line="-3"/>
        <location filename="components/msopen.cpp" line="-3"/>
        <location filename="components/msstep.cpp" line="-3"/>
        <location filename="components/mstee.cpp" line="-3"/>
        <source>quasi-static microstrip model</source>
        <translation>kvazistatický mikropáskový model</translation>
    </message>
    <message>
        <location filename="components/msopen.cpp" line="+6"/>
        <source>microstrip open end model</source>
        <translation>model otevřeného mikropáskového vedení</translation>
    </message>
    <message>
        <location filename="components/capacitor.cpp" line="-16"/>
        <location filename="components/component.cpp" line="-231"/>
        <location filename="components/diode.cpp" line="+40"/>
        <location filename="components/logical_buf.cpp" line="+6"/>
        <location filename="components/logical_inv.cpp" line="+6"/>
        <location filename="components/resistor.cpp" line="+10"/>
        <source>schematic symbol</source>
        <translation>symbol v obvodu</translation>
    </message>
    <message>
        <location filename="components/sp_sim.cpp" line="+8"/>
        <source>calculate noise parameters</source>
        <translation>spočítat parametr rušení</translation>
    </message>
    <message>
        <location filename="components/ifile.cpp" line="-4"/>
        <location filename="components/sparamfile.cpp" line="-40"/>
        <location filename="components/vfile.cpp" line="-4"/>
        <source>interpolation type</source>
        <translation>typ interpolace</translation>
    </message>
    <message>
        <location filename="paintings/ellipsearc.cpp" line="+387"/>
        <source>Edit Arc Properties</source>
        <translation>změnit parametry oblouku</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="-69"/>
        <source>Format Error:
Wrong &apos;painting&apos; line delimiter!</source>
        <translation>Chyba formátování:
Chybný &apos;grafický&apos; oddělovač čáry!</translation>
    </message>
    <message>
        <location filename="components/dc_sim.cpp" line="+5"/>
        <source>save subcircuit nodes into dataset</source>
        <translation>zapsat simulační výsledky a pracovní body podobvodů do datové sady</translation>
    </message>
    <message>
        <location filename="components/tr_sim.cpp" line="+6"/>
        <source>number of simulation time steps</source>
        <translation>počet časových kroků simulace</translation>
    </message>
    <message>
        <location filename="components/etr_sim.cpp" line="-28"/>
        <source>externally driven transient simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>integration method</source>
        <translation>integrační metoda</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/tr_sim.cpp" line="+3"/>
        <source>order of integration method</source>
        <translation>stupeň integrační metody</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>initial step size in seconds</source>
        <translation>počáteční délka kroku v sekundách</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>minimum step size in seconds</source>
        <translation>minimální délka kroku v sekundách</translation>
    </message>
    <message>
        <location line="+39"/>
        <source>External transient simulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../qucs-edit/main.cpp" line="+76"/>
        <source>Qucs Editor Version </source>
        <translation>Verze Qucs editoru </translation>
    </message>
    <message>
        <source>
very simple text editor for Qucs
</source>
        <translation type="obsolete">
Jednoduchý textový editor pro Qucs
</translation>
    </message>
    <message>
        <source>
Usage:  qucsedit [-r] filename
</source>
        <translation type="obsolete">
Použití:  qucsedit [-r] jméno souboru
</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>    -r  open file read-only
</source>
        <translation>    -r  otevřít soubory jen pro čtení
</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>Too long command line argument!

</source>
        <translation>Příliš dlouhý argument v příkazovém řádku!

</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Wrong command line argument!

</source>
        <translation>Chybný argument v příkazovém řádku!

</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Only one filename allowed!

</source>
        <translation>Je povolen jen jeden název souboru!

</translation>
    </message>
    <message>
        <location filename="components/ipulse.cpp" line="+23"/>
        <source>ideal current pulse source</source>
        <translation>ideální pulzní proudový zdroj</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>current before and after the pulse</source>
        <translation>proud před a po impulzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>current of the pulse</source>
        <translation>proud během pulzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/vpulse.cpp" line="+54"/>
        <source>start time of the pulse</source>
        <translation>počáteční čas pulzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/vpulse.cpp" line="+2"/>
        <source>ending time of the pulse</source>
        <translation>konečný čas pulzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/irect.cpp" line="+59"/>
        <location filename="components/vpulse.cpp" line="+2"/>
        <location filename="components/vrect.cpp" line="+58"/>
        <source>rise time of the leading edge</source>
        <translation>doba nástupu pulzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/irect.cpp" line="+2"/>
        <location filename="components/vpulse.cpp" line="+2"/>
        <location filename="components/vrect.cpp" line="+2"/>
        <source>fall time of the trailing edge</source>
        <translation>doba zánik pulzu</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Current Pulse</source>
        <translation>Pulzní proudový zdroj</translation>
    </message>
    <message>
        <location filename="components/vpulse.cpp" line="-37"/>
        <source>ideal voltage pulse source</source>
        <translation>ideální napěťový zdroj</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>voltage before and after the pulse</source>
        <translation>Napětí před a po pulzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>voltage of the pulse</source>
        <translation>Napětí během pulzu</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Voltage Pulse</source>
        <translation>Napěťový pulzní zdroj</translation>
    </message>
    <message>
        <location filename="components/irect.cpp" line="-38"/>
        <source>ideal rectangle current source</source>
        <translation>ideální zdroj obdélníkového proudu</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>current at high pulse</source>
        <translation>prou během pulzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/vrect.cpp" line="-6"/>
        <source>duration of high pulses</source>
        <translation>trvání horní úrovně pulzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/vrect.cpp" line="+2"/>
        <source>duration of low pulses</source>
        <translation>trvání dolní úrovně pulzu</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Rectangle Current</source>
        <translation>Zdroj obdélníkového proudu</translation>
    </message>
    <message>
        <location filename="components/vrect.cpp" line="-33"/>
        <source>ideal rectangle voltage source</source>
        <translation>ideální zdroj obdélníkového napětí</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>voltage of high signal</source>
        <translation>Napětí horní úrovně pulzu</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Rectangle Voltage</source>
        <translation>Zdroj obdélníkového napětí</translation>
    </message>
    <message>
        <location filename="../qucs-edit/main.cpp" line="-69"/>
        <source>
Very simple text editor for Qucs
</source>
        <translation>
jednoduchý textový editor pro Qucs
</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>
Usage:  qucsedit [-r] file
</source>
        <translation>
Použití:  qucsedit [-r] soubor
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>    -h  display this help and exit
</source>
        <translation>    -h  zobrazit tuto nápovědu a ukončit
</translation>
    </message>
    <message>
        <source> &lt;invalid&gt;</source>
        <translation type="obsolete"> &lt;neplatné&gt;</translation>
    </message>
    <message>
        <location filename="components/am_modulator.cpp" line="+2"/>
        <location filename="components/ampere_ac.cpp" line="-18"/>
        <location filename="components/pm_modulator.cpp" line="+2"/>
        <location filename="components/volt_ac.cpp" line="-18"/>
        <source>initial phase in degrees</source>
        <translation>počáteční fázové posunutí ve stupních</translation>
    </message>
    <message>
        <location filename="components/etr_sim.cpp" line="-27"/>
        <location filename="components/tr_sim.cpp" line="+12"/>
        <source>relative tolerance of local truncation error</source>
        <translation>relativní tolerance lokální chyby ukončení</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>absolute tolerance of local truncation error</source>
        <translation>absolutní tolerance lokální chyby ukončení</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>overestimation of local truncation error</source>
        <translation>Faktor pro přehodnocení lokální chyby ukončení</translation>
    </message>
    <message>
        <location filename="components/amplifier.cpp" line="-25"/>
        <source>ideal amplifier</source>
        <translation>ideální zesilovač</translation>
    </message>
    <message>
        <location line="+21"/>
        <location filename="components/opamp.cpp" line="+50"/>
        <location filename="components/vfile.cpp" line="+3"/>
        <source>voltage gain</source>
        <translation>Napěťové zesílení</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Amplifier</source>
        <translation>Zesilovač</translation>
    </message>
    <message>
        <location filename="components/msvia.cpp" line="-25"/>
        <source>microstrip via</source>
        <translation>mikropáskové prokontaktování</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>diameter of round via conductor</source>
        <translation>průměr kulatého prokontaktování</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Microstrip Via</source>
        <translation>Mikropáskové prokontaktování</translation>
    </message>
    <message>
        <location filename="components/mosfet_sub.cpp" line="+5"/>
        <source>transconductance coefficient in A/V^2</source>
        <translation>transkonduktační parametr v A/V²</translation>
    </message>
    <message>
        <location filename="components/opamp.cpp" line="-27"/>
        <source>operational amplifier</source>
        <translation>Operační zesilovač</translation>
    </message>
    <message>
        <location line="+43"/>
        <source>OpAmp</source>
        <translation>OpAmp</translation>
    </message>
    <message>
        <location line="-14"/>
        <source>absolute value of maximum and minimum output voltage</source>
        <translation>absolutní hodnota maximálního a minimálního výstupního napětí</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="+60"/>
        <source>Wrong document type: </source>
        <translation>Chybný typ dokumentu: </translation>
    </message>
    <message>
        <source>Insert Nodename</source>
        <translation type="obsolete">Zadat označení uzlu</translation>
    </message>
    <message>
        <source>Enter the label:</source>
        <translation type="obsolete">zadat označení:</translation>
    </message>
    <message>
        <location filename="components/dc_sim.cpp" line="+3"/>
        <source>preferred convergence algorithm</source>
        <translation>upřednostňovaný konvergenční algoritmus</translation>
    </message>
    <message>
        <location filename="components/spicefile.cpp" line="+44"/>
        <source>SPICE netlist file</source>
        <translation>SPICE netlist soubor</translation>
    </message>
    <message>
        <location line="+62"/>
        <source>spice</source>
        <translation>spice</translation>
    </message>
    <message>
        <location line="-35"/>
        <source>SPICE netlist</source>
        <translation>Space netlist</translation>
    </message>
    <message>
        <location filename="diagrams/tabdiagram.cpp" line="-92"/>
        <location filename="diagrams/timingdiagram.cpp" line="+148"/>
        <location filename="diagrams/truthdiagram.cpp" line="+77"/>
        <source>no variables</source>
        <translation>žádné proměnné</translation>
    </message>
    <message>
        <location line="+148"/>
        <location filename="diagrams/timingdiagram.cpp" line="+14"/>
        <location line="+113"/>
        <location filename="diagrams/truthdiagram.cpp" line="+141"/>
        <source>no data</source>
        <translation>žádná data</translation>
    </message>
    <message>
        <location filename="components/ac_sim.cpp" line="+8"/>
        <source>calculate noise voltages</source>
        <translation>Spočítání rušivých napětí</translation>
    </message>
    <message>
        <location filename="components/coplanar.cpp" line="-18"/>
        <location filename="components/cpwopen.cpp" line="+4"/>
        <location filename="components/cpwshort.cpp" line="+2"/>
        <location filename="components/cpwstep.cpp" line="+4"/>
        <source>material at the backside of the substrate</source>
        <translation>Materiál na zadní straně substrátu</translation>
    </message>
    <message>
        <location filename="components/mstee.cpp" line="+6"/>
        <source>temperature in degree Celsius</source>
        <translation>teplota ve °C</translation>
    </message>
    <message>
        <location filename="../qucs-edit/main.cpp" line="-2"/>
        <source>Copyright (C) 2004, 2005 by Michael Margraf
</source>
        <translation>Copyright (C) 2004, 2005 by Michael Margraf
</translation>
    </message>
    <message>
        <location filename="components/coplanar.cpp" line="+3"/>
        <source>use approximation instead of precise equation</source>
        <translation>Použít přibližný vzorec namísto přesné rovnice</translation>
    </message>
    <message>
        <location filename="components/dc_sim.cpp" line="+3"/>
        <location filename="components/etr_sim.cpp" line="+2"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>method for solving the circuit matrix</source>
        <translation>Metoda pro řešení matice zapojení obvodu</translation>
    </message>
    <message>
        <location filename="components/biast.cpp" line="-16"/>
        <location filename="components/dcfeed.cpp" line="-14"/>
        <source>for transient simulation: inductance in Henry</source>
        <translation>pro přechodovou simulaci: induktivita v Henry</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/dcblock.cpp" line="-14"/>
        <source>for transient simulation: capacitance in Farad</source>
        <translation>pro přechodovou simulaci: kapazität ve faradech</translation>
    </message>
    <message>
        <location filename="components/cpwopen.cpp" line="-48"/>
        <source>coplanar open</source>
        <translation>otevřené koplanární vedení</translation>
    </message>
    <message>
        <location line="+46"/>
        <source>width of gap at end of line</source>
        <translation>šířka mezery na konci vedení</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Coplanar Open</source>
        <translation>otevřené koplanární vedení</translation>
    </message>
    <message>
        <location filename="components/cpwshort.cpp" line="-45"/>
        <source>coplanar short</source>
        <translation>zkratované koplanární vedení</translation>
    </message>
    <message>
        <location line="+60"/>
        <source>Coplanar Short</source>
        <translation>Zkratované koplanární vedení</translation>
    </message>
    <message>
        <location filename="components/cpwgap.cpp" line="-45"/>
        <source>coplanar gap</source>
        <translation>koplanární mezera</translation>
    </message>
    <message>
        <location line="+47"/>
        <source>width of gap between the two lines</source>
        <translation>Odstup mezi koplanárními vedeními</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Coplanar Gap</source>
        <translation>koplanární mezera</translation>
    </message>
    <message>
        <location filename="components/spicefile.cpp" line="+31"/>
        <source>sim</source>
        <translation>Sim</translation>
    </message>
    <message>
        <location filename="components/cpwstep.cpp" line="-51"/>
        <source>coplanar step</source>
        <translation>koplanární krok</translation>
    </message>
    <message>
        <location line="+49"/>
        <source>distance between ground planes</source>
        <translation>odstup mezi zemnícími plochami</translation>
    </message>
    <message>
        <location filename="components/logical_or.cpp" line="+22"/>
        <source>logical OR</source>
        <translation>logický OR</translation>
    </message>
    <message>
        <location filename="components/component.cpp" line="-10"/>
        <source>number of input ports</source>
        <translation>počet vstupů</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/digi_source.cpp" line="+6"/>
        <location filename="components/logical_buf.cpp" line="-8"/>
        <location filename="components/logical_inv.cpp" line="-8"/>
        <source>voltage of high level</source>
        <translation>napětí horní úrovně</translation>
    </message>
    <message>
        <location line="+259"/>
        <source>Format Error:
Unknown component!
%1

Do you make use of loadable components?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/logical_nor.cpp" line="+22"/>
        <source>logical NOR</source>
        <translation>logický NOR</translation>
    </message>
    <message>
        <location filename="components/logical_or.cpp" line="+23"/>
        <source>n-port OR</source>
        <translation>n-port OR</translation>
    </message>
    <message>
        <location filename="components/logical_and.cpp" line="+22"/>
        <source>logical AND</source>
        <translation>logický AND</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>n-port AND</source>
        <translation>n-port AND</translation>
    </message>
    <message>
        <location filename="components/logical_nand.cpp" line="+22"/>
        <source>logical NAND</source>
        <translation>logický NAND</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>n-port NAND</source>
        <translation>n-port NAND</translation>
    </message>
    <message>
        <location filename="components/logical_nor.cpp" line="+23"/>
        <source>n-port NOR</source>
        <translation>n-port NOR</translation>
    </message>
    <message>
        <location filename="components/logical_xnor.cpp" line="+22"/>
        <source>logical XNOR</source>
        <translation>logický XNOR</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>n-port XNOR</source>
        <translation>n-port XNOR</translation>
    </message>
    <message>
        <location filename="components/logical_xor.cpp" line="+22"/>
        <source>logical XOR</source>
        <translation>logický XOR</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>n-port XOR</source>
        <translation>n-port XOR</translation>
    </message>
    <message>
        <location filename="components/logical_inv.cpp" line="-4"/>
        <source>logical inverter</source>
        <translation>logický negátor</translation>
    </message>
    <message>
        <location line="+121"/>
        <source>Inverter</source>
        <translation>Negátor</translation>
    </message>
    <message>
        <location filename="components/digi_sim.cpp" line="+25"/>
        <location line="+41"/>
        <source>digital simulation</source>
        <translation>digitální simulace</translation>
    </message>
    <message>
        <location line="-21"/>
        <source>type of simulation</source>
        <translation>typ simulace</translation>
    </message>
    <message>
        <location filename="components/digi_source.cpp" line="-33"/>
        <location line="+50"/>
        <source>digital source</source>
        <translation>digitální zdroj</translation>
    </message>
    <message>
        <location line="-21"/>
        <source>initial output value</source>
        <translation>počáteční výstupní hodnota</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>list of times for changing output value</source>
        <translation>seznam pro okamžiky změn výstupních parametrů</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="+337"/>
        <source>ERROR: Cannot load subcircuit &quot;%1&quot;.</source>
        <translation>CHYBA: Podobvod &quot;%1&quot; nelze otevřít.</translation>
    </message>
    <message>
        <location line="+53"/>
        <source>ERROR: Cannot load library component &quot;%1&quot;.</source>
        <translation>CHYBA: komponentu z knihovny &quot;%1&quot; nelze otevřít.</translation>
    </message>
    <message>
        <location line="+13"/>
        <location filename="components/spicefile.cpp" line="+150"/>
        <source>ERROR: No file name in SPICE component &quot;%1&quot;.</source>
        <translation>CHYBA: ve SPICE-komponentě &quot;%1&quot; není zadán žádný název souboru.</translation>
    </message>
    <message>
        <location filename="paintings/arrow.cpp" line="+137"/>
        <source>Arrow</source>
        <translation>Šipka</translation>
    </message>
    <message>
        <location filename="paintings/ellipsearc.cpp" line="-296"/>
        <source>Elliptic Arc</source>
        <translation>Eliptický oblouk</translation>
    </message>
    <message>
        <location filename="paintings/ellipse.cpp" line="-275"/>
        <source>Ellipse</source>
        <translation>Elipsa</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>filled Ellipse</source>
        <translation>vyplněná elipsa</translation>
    </message>
    <message>
        <location filename="paintings/graphicline.cpp" line="-236"/>
        <source>Line</source>
        <translation>Čára</translation>
    </message>
    <message>
        <location filename="paintings/graphictext.cpp" line="+131"/>
        <source>Text</source>
        <translation>Text</translation>
    </message>
    <message>
        <location filename="paintings/rectangle.cpp" line="-277"/>
        <source>Rectangle</source>
        <translation>Obdélník</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>filled Rectangle</source>
        <translation>vyplněný obdélník</translation>
    </message>
    <message>
        <location filename="diagrams/curvediagram.cpp" line="+245"/>
        <source>Locus Curve</source>
        <translation>Amplitudově fázová křivka</translation>
    </message>
    <message>
        <location filename="diagrams/polardiagram.cpp" line="+98"/>
        <source>Polar</source>
        <translation>Polární</translation>
    </message>
    <message>
        <location filename="diagrams/psdiagram.cpp" line="+125"/>
        <source>Polar-Smith Combi</source>
        <translation>Kombinovaný polární-Smithův</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Smith-Polar Combi</source>
        <translation>Smithův-polární kombinovaný</translation>
    </message>
    <message>
        <location filename="diagrams/rect3ddiagram.cpp" line="+1140"/>
        <source>3D-Cartesian</source>
        <translation>3D-kartézský</translation>
    </message>
    <message>
        <location filename="diagrams/rectdiagram.cpp" line="+243"/>
        <source>Cartesian</source>
        <translation>Kartézský</translation>
    </message>
    <message>
        <location filename="diagrams/smithdiagram.cpp" line="+108"/>
        <source>Smith Chart</source>
        <translation>Smithův-diagram</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Admittance Smith</source>
        <translation>Smithův diagram (admitance)</translation>
    </message>
    <message>
        <location filename="diagrams/tabdiagram.cpp" line="-7"/>
        <location filename="diagrams/timingdiagram.cpp" line="-80"/>
        <location line="+89"/>
        <location filename="diagrams/truthdiagram.cpp" line="-7"/>
        <source>wrong dependency</source>
        <translation>chybná závislost</translation>
    </message>
    <message>
        <location line="+105"/>
        <source>Tabular</source>
        <translation>Tabulka</translation>
    </message>
    <message>
        <location filename="components/cpwstep.cpp" line="+17"/>
        <source>Coplanar Step</source>
        <translation>Koplanární odstup</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="+116"/>
        <location filename="components/diode.cpp" line="-26"/>
        <location filename="components/photodiode.cpp" line="-47"/>
        <source>reverse breakdown voltage</source>
        <translation>závěrné průrazné napětí</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/diode.cpp" line="+2"/>
        <location filename="components/photodiode.cpp" line="+3"/>
        <source>current at reverse breakdown voltage</source>
        <translation>Proud při průrazu v závěrném směru</translation>
    </message>
    <message>
        <location filename="components/libcomp.cpp" line="+41"/>
        <source>Component taken from Qucs library</source>
        <translation>Komponenta z Qucs-knihovny</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>name of qucs library file</source>
        <translation>jméno souboru knihovny Qucs</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>name of component in library</source>
        <translation>jméno komponenty v knihovně</translation>
    </message>
    <message>
        <location filename="components/mutual2.cpp" line="+23"/>
        <source>three mutual inductors</source>
        <translation>tři svázané induktivity</translation>
    </message>
    <message>
        <location filename="components/mutual.cpp" line="+58"/>
        <location filename="components/mutual2.cpp" line="+46"/>
        <source>inductance of coil 1</source>
        <translation>induktivita cívky 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/mutual2.cpp" line="+2"/>
        <source>inductance of coil 2</source>
        <translation>Induktivita cívky 2</translation>
    </message>
    <message>
        <location filename="components/mutual2.cpp" line="+2"/>
        <source>inductance of coil 3</source>
        <translation>Induktivita cívky 3</translation>
    </message>
    <message>
        <location filename="components/mutual.cpp" line="+2"/>
        <location filename="components/mutual2.cpp" line="+2"/>
        <source>coupling factor between coil 1 and 2</source>
        <translation>faktor svázání mezi cívkou 1 a 2</translation>
    </message>
    <message>
        <location filename="components/mutual2.cpp" line="+2"/>
        <source>coupling factor between coil 1 and 3</source>
        <translation>faktor svázání mezi cívkou 1 a 3</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>coupling factor between coil 2 and 3</source>
        <translation>faktor svázání mezi cívkou 2 a 3</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>3 Mutual Inductors</source>
        <translation>3 svázané induktivity</translation>
    </message>
    <message>
        <location filename="components/mutual.cpp" line="-39"/>
        <source>two mutual inductors</source>
        <translation>3 svázané induktivity</translation>
    </message>
    <message>
        <location line="+53"/>
        <source>Mutual Inductors</source>
        <translation>Svázané induktivity</translation>
    </message>
    <message>
        <location filename="components/noise_ii.cpp" line="-58"/>
        <location filename="components/noise_iv.cpp" line="-53"/>
        <location filename="components/noise_vv.cpp" line="-48"/>
        <source>correlated current sources</source>
        <translation>korelované proudové zdroje</translation>
    </message>
    <message>
        <location line="+48"/>
        <location filename="components/noise_iv.cpp" line="+43"/>
        <source>current power spectral density of source 1</source>
        <translation>spektrální výkonová hustota rušení od zdroje 1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>current power spectral density of source 2</source>
        <translation>spektrální výkonová hustota rušení od zdroje 2</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/noise_iv.cpp" line="+4"/>
        <location filename="components/noise_vv.cpp" line="+42"/>
        <source>normalized correlation coefficient</source>
        <translation>normovaný korelační koeficient</translation>
    </message>
    <message>
        <location line="+20"/>
        <location filename="components/noise_iv.cpp" line="+20"/>
        <location filename="components/noise_vv.cpp" line="+20"/>
        <source>Correlated Noise Sources</source>
        <translation>Korelované zdroje rušení</translation>
    </message>
    <message>
        <location filename="components/noise_iv.cpp" line="-22"/>
        <location filename="components/noise_vv.cpp" line="-22"/>
        <source>voltage power spectral density of source 2</source>
        <translation>spektrální výkonová hustota rušivého napětí od zdroje 2</translation>
    </message>
    <message>
        <location filename="components/noise_vv.cpp" line="-2"/>
        <source>voltage power spectral density of source 1</source>
        <translation>spektrální výkonová hustota rušivého napětí od zdroje 1</translation>
    </message>
    <message>
        <location filename="components/sparamfile.cpp" line="-2"/>
        <source>data type</source>
        <translation>datový typ</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="-116"/>
        <source>ERROR: Component &quot;%1&quot; has no analog model.</source>
        <translation>CHYBA: Komponenta &quot;%1&quot; neobsahuje žádný analogový model.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>ERROR: Component &quot;%1&quot; has no digital model.</source>
        <translation>CHYBA: Komponenta &quot;%1&quot; neobsahuje žádný digitální model.</translation>
    </message>
    <message>
        <location line="+284"/>
        <source>WARNING: Ignore simulation component in subcircuit &quot;%1&quot;.</source>
        <translation>UPOZORNĚNÍ: Simulační komponenta v podobvodu &quot;%1&quot; bude ignorována.</translation>
    </message>
    <message>
        <source>WARNING: Ignore equation in subcircuit &quot;%1&quot;.</source>
        <translation type="obsolete">UPOZORNĚNÍ: Rovnice v podobvodu &quot;%1&quot; bude ignorována.</translation>
    </message>
    <message>
        <source>duration of simulation</source>
        <translation type="obsolete">Trvání simulace</translation>
    </message>
    <message>
        <source>type of the port</source>
        <translation type="obsolete">druh portu</translation>
    </message>
    <message>
        <location filename="diagrams/timingdiagram.cpp" line="+223"/>
        <source>Timing Diagram</source>
        <translation>Časový diagram</translation>
    </message>
    <message>
        <location filename="diagrams/truthdiagram.cpp" line="+53"/>
        <source>Truth Table</source>
        <translation>Logická tabulka</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="+282"/>
        <source>ERROR: Only one digital simulation allowed.</source>
        <translation>CHYBA: Je povolena pouze jedna digitální simulace.</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>ERROR: Analog and digital simulations cannot be mixed.</source>
        <translation>CHYBA: Analogové a digitální simulace nelze míchat.</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>ERROR: Digital simulation needs at least one digital source.</source>
        <translation>CHYBA: Digitální simulace potřebuje přinejmenším jeden digitální zdroj.</translation>
    </message>
    <message>
        <location filename="components/digi_sim.cpp" line="+2"/>
        <source>duration of TimeList simulation</source>
        <translation>Trvání TimeList simulace</translation>
    </message>
    <message>
        <source>ERROR: No ground symbol allowed in digital simulation.</source>
        <translation type="obsolete">CHYBA: Symbol uzemnění není v digitální simulaci povolen.</translation>
    </message>
    <message>
        <source>ERROR: No simulation specified on this page.</source>
        <translation type="obsolete">CHYBA: Na stránce nebyla zadána žádná simulace.</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="+18"/>
        <location filename="components/bjtsub.cpp" line="+88"/>
        <location filename="components/diode.cpp" line="+4"/>
        <location filename="components/jfet.cpp" line="+38"/>
        <location filename="components/photodiode.cpp" line="+21"/>
        <source>saturation current temperature exponent</source>
        <translation>teplotní exponent saturačního proudu</translation>
    </message>
    <message>
        <location filename="components/bjtsub.cpp" line="+2"/>
        <location filename="components/diode.cpp" line="+2"/>
        <source>energy bandgap in eV</source>
        <translation>energie valenčního odstupu</translation>
    </message>
    <message>
        <location filename="components/diode.cpp" line="+2"/>
        <source>Bv linear temperature coefficient</source>
        <translation>lineární teplotní koeficient od Bv</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Rs linear temperature coefficient</source>
        <translation>lineární teplotní koeficient od Rs</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Tt linear temperature coefficient</source>
        <translation>lineární teplotní koeficient od Tt</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Tt quadratic temperature coefficient</source>
        <translation>kvadratický tepelný koeficient od Tt</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>M linear temperature coefficient</source>
        <translation>lineární teplotní koeficient od M</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>M quadratic temperature coefficient</source>
        <translation>kvadratický tepelný koeficient od M</translation>
    </message>
    <message>
        <source>temperature at which parameters where extracted</source>
        <translation type="obsolete">Teplota, při které byly extrahovány parametry modelu</translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="components/tunneldiode.cpp" line="+2"/>
        <source>default area for diode</source>
        <translation>plošný faktor diody</translation>
    </message>
    <message>
        <location filename="components/bjtsub.cpp" line="-4"/>
        <source>temperature exponent for forward- and reverse beta</source>
        <translation>teplotní koeficient pro dopředné a závěrné zesílení</translation>
    </message>
    <message>
        <location line="+6"/>
        <location filename="components/diode.cpp" line="-2"/>
        <location filename="components/jfet.cpp" line="+6"/>
        <location filename="components/resistor.cpp" line="-4"/>
        <source>temperature at which parameters were extracted</source>
        <translation>teplota při které byly extrahovány parametry modelu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>default area for bipolar transistor</source>
        <translation>plošný faktor bipolárního tranzistoru</translation>
    </message>
    <message>
        <location filename="components/jfet.cpp" line="-4"/>
        <source>Vt0 temperature coefficient</source>
        <translation>teplotní koefizient od Vt0</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Beta exponential temperature coefficient</source>
        <translation>exponentielní teplotní koeficient od Beta</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>default area for JFET</source>
        <translation>plošný faktor JFETu</translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="+4"/>
        <location filename="components/MESFET.cpp" line="+6"/>
        <location filename="components/log_amp.cpp" line="+61"/>
        <location filename="components/mosfet_sub.cpp" line="+91"/>
        <location filename="components/nigbt.cpp" line="+6"/>
        <location filename="components/photodiode.cpp" line="-8"/>
        <location filename="components/potentiometer.cpp" line="+43"/>
        <source>parameter measurement temperature</source>
        <translation>teplota při měření parametrů modelu</translation>
    </message>
    <message>
        <location filename="components/coupler.cpp" line="-45"/>
        <source>ideal coupler</source>
        <translation>ideální vazební člen</translation>
    </message>
    <message>
        <location line="+41"/>
        <source>coupling factor</source>
        <translation>vazební faktor</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>phase shift of coupling path in degree</source>
        <translation>fázové posunutí vazebního členu ve stupních</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Coupler</source>
        <translation>Vazební člen</translation>
    </message>
    <message>
        <location filename="components/rs_flipflop.cpp" line="-2"/>
        <source>RS flip flop</source>
        <translation>RS flip flop</translation>
    </message>
    <message>
        <location filename="components/d_flipflop.cpp" line="-2"/>
        <source>D flip flop with asynchron reset</source>
        <translation>D flip flop s asynchronním reset vstupem</translation>
    </message>
    <message>
        <location filename="components/jk_flipflop.cpp" line="-2"/>
        <source>JK flip flop with asynchron set and reset</source>
        <translation>JK flip flop s asynchroními set a reset vstupy</translation>
    </message>
    <message>
        <location filename="components/d_flipflop.cpp" line="+92"/>
        <source>D-FlipFlop</source>
        <translation>D-FlipFlop</translation>
    </message>
    <message>
        <location filename="components/jk_flipflop.cpp" line="+119"/>
        <source>JK-FlipFlop</source>
        <translation>JK-FlipFlop</translation>
    </message>
    <message>
        <location filename="components/rs_flipflop.cpp" line="+87"/>
        <source>RS-FlipFlop</source>
        <translation>RS-FlipFlop</translation>
    </message>
    <message>
        <location filename="main.cpp" line="+529"/>
        <location line="+63"/>
        <source>Error: Wrong time format in &quot;%1&quot;. Use positive number with units</source>
        <translation>Chyba: Chybný časový formát v &quot;%1&quot;. Použijte kladné číslo s jednotkami</translation>
    </message>
    <message>
        <location filename="components/coaxialline.cpp" line="-36"/>
        <source>coaxial transmission line</source>
        <translation>koaxiální vedení</translation>
    </message>
    <message>
        <source>relative permittivity of dielectrica</source>
        <translation type="obsolete">relativní permitivita dielektrika</translation>
    </message>
    <message>
        <location line="+24"/>
        <location filename="components/rectline.cpp" line="-2"/>
        <location filename="components/twistedpair.cpp" line="-4"/>
        <source>specific resistance of conductor</source>
        <translation>specifický odpor vodiče</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/rectline.cpp" line="-4"/>
        <location filename="components/twistedpair.cpp" line="-2"/>
        <source>relative permeability of conductor</source>
        <translation>relativní permeabilita vodiče</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>diameter of inner conductor</source>
        <translation>průměr vnitřního vodiče</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/rectline.cpp" line="-4"/>
        <source>mechanical length of the line</source>
        <translation>mechanická délka vedení</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Coaxial Line</source>
        <translation>Koaxiální kabel</translation>
    </message>
    <message>
        <location filename="components/ampere_ac.cpp" line="-4"/>
        <source>peak current in Ampere</source>
        <translation>špičková hodnota proudu v ampérech</translation>
    </message>
    <message>
        <location filename="components/coaxialline.cpp" line="-22"/>
        <source>inner diameter of shield</source>
        <translation>vnitřní průměr vnějšího vodiče</translation>
    </message>
    <message>
        <location filename="components/resistor.cpp" line="-4"/>
        <source>first order temperature coefficient</source>
        <translation>teplotní koeficient prvního řádu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>second order temperature coefficient</source>
        <translation>teplotní koeficient druhého řádu</translation>
    </message>
    <message>
        <location filename="components/sp_sim.cpp" line="+7"/>
        <source>put characteristic values into dataset</source>
        <translation>zapsat charakteristické hodnoty do výstupní datové sady</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>save subcircuit characteristic values into dataset</source>
        <translation>uložit charakteristické hodnoty podobvodů do datové sady</translation>
    </message>
    <message>
        <location filename="components/am_modulator.cpp" line="-4"/>
        <location filename="components/pm_modulator.cpp" line="-4"/>
        <location filename="components/volt_ac.cpp" line="-4"/>
        <source>peak voltage in Volts</source>
        <translation>špičková hodnota napětí ve voltech</translation>
    </message>
    <message>
        <location filename="components/coaxialline.cpp" line="-6"/>
        <location filename="components/rectline.cpp" line="+2"/>
        <source>relative permittivity of dielectric</source>
        <translation>relativní permitivita dielektrika</translation>
    </message>
    <message>
        <location filename="components/vprobe.cpp" line="+23"/>
        <source>voltage probe</source>
        <translation>Voltmetr</translation>
    </message>
    <message>
        <location line="+44"/>
        <source>Voltage Probe</source>
        <translation>Voltmetr</translation>
    </message>
    <message>
        <location filename="components/rfedd.cpp" line="+37"/>
        <location filename="components/sparamfile.cpp" line="+9"/>
        <source>number of ports</source>
        <translation>počet portů</translation>
    </message>
    <message>
        <location filename="components/sparamfile.cpp" line="+17"/>
        <source>n-port S parameter file</source>
        <translation>n-port S parameter soubor</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>2-port S parameter file</source>
        <translation>2-port S parameter soubor</translation>
    </message>
    <message>
        <location filename="components/subcirport.cpp" line="-61"/>
        <source>type of the port (for digital simulation only)</source>
        <translation>druh připojení (pouze pro digitální simulaci)</translation>
    </message>
    <message>
        <location filename="components/am_modulator.cpp" line="-29"/>
        <source>ac voltage source with amplitude modulator</source>
        <translation>AC zdroj napětí s amplitudovým modulátorem</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>AM</source>
        <translation>AM</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>modulation level</source>
        <translation>modulační úroveň</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>AM modulated Source</source>
        <translation>AM modulovaný zdroj</translation>
    </message>
    <message>
        <location filename="components/ampere_ac.cpp" line="+6"/>
        <location filename="components/volt_ac.cpp" line="+6"/>
        <source>damping factor (transient simulation only)</source>
        <translation>tlumící faktor (pouze pro přechodovou simulaci)</translation>
    </message>
    <message>
        <location filename="components/pm_modulator.cpp" line="-29"/>
        <source>ac voltage source with phase modulator</source>
        <translation>AC zdroj napětí s fázovým modulátorem</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>PM</source>
        <translation>PM</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>modulation index</source>
        <translation>modulační index</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>PM modulated Source</source>
        <translation>PM modulovaný zdroj</translation>
    </message>
    <message>
        <source>relais</source>
        <translation type="obsolete">relé</translation>
    </message>
    <message>
        <location filename="components/switch.cpp" line="-4"/>
        <source>resistance of &quot;on&quot; state in ohms</source>
        <translation>odpor v &quot;zapnutém&quot; stavu v Ohmech</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resistance of &quot;off&quot; state in ohms</source>
        <translation>odpor v &quot;vypnutém&quot; stavu v Ohmech</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Max possible switch transition time (transition time 1/100 smallest value in &apos;time&apos;, or this number)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Relais</source>
        <translation type="obsolete">Relé</translation>
    </message>
    <message>
        <location line="-10"/>
        <source>initial state</source>
        <translation>počáteční stav</translation>
    </message>
    <message>
        <source>time when state changes (comma separated list possible)</source>
        <translation type="obsolete">čas, kdy se mění stav (možný seznam s čárkou oddělenými hodnotami)</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Switch</source>
        <translation>Spínač</translation>
    </message>
    <message>
        <location filename="components/tline.cpp" line="-2"/>
        <location filename="components/tline_4port.cpp" line="-2"/>
        <source>attenuation factor per length in 1/m</source>
        <translation>faktor útlumu na jednotku délky v 1/m</translation>
    </message>
    <message>
        <location filename="components/switch.cpp" line="-34"/>
        <source>switch (time controlled)</source>
        <translation>Spínač (časově řízený)</translation>
    </message>
    <message>
        <location filename="components/relais.cpp" line="-8"/>
        <source>threshold voltage in Volts</source>
        <translation>mezní úroveň napětí ve voltech</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>hysteresis voltage in Volts</source>
        <translation>hysterezní napětí ve voltech</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resistance of &quot;on&quot; state in Ohms</source>
        <translation>Odpor v &quot;zapnutém&quot; stavu v Ohmech</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resistance of &quot;off&quot; state in Ohms</source>
        <translation>odpor ve &quot;vypnutém&quot; stavu v Ohmech</translation>
    </message>
    <message>
        <location filename="mouseactions.cpp" line="+742"/>
        <source>Edit Properties</source>
        <translation>Upravit vlastnosti</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Export as image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>power matching</source>
        <translation>výkonové přizpůsobení</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>noise matching</source>
        <translation>přizpůsobení rušení</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>2-port matching</source>
        <translation>2-port přizpůsobení</translation>
    </message>
    <message>
        <location line="+60"/>
        <location filename="components/spicefile.cpp" line="+103"/>
        <location line="+87"/>
        <source>Info</source>
        <translation>Info</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>The ground potential cannot be labeled!</source>
        <translation>Uzemnění nelze pojmenovat!</translation>
    </message>
    <message>
        <location filename="components/switch.cpp" line="+5"/>
        <source>time when state changes (semicolon separated list possible, even numbered lists are repeated)</source>
        <oldsource>time when state changes (semicolon separated list possible)</oldsource>
        <translation type="unfinished">čas, kdy se mění stav (možný seznam s čárkou oddělenými hodnotami)</translation>
    </message>
    <message>
        <source>ERROR: No file name in VHDL component &quot;%1&quot;.</source>
        <translation type="obsolete">CHYBA: Ve VHDL komponentě &quot;%1&quot; chybí jméno souboru.</translation>
    </message>
    <message>
        <source>ERROR: Cannot open VHDL file &quot;%1&quot;.</source>
        <translation type="obsolete">CHYBA: VHDL soubor &quot;%1&quot; nelze otevřít.</translation>
    </message>
    <message>
        <location filename="components/vhdlfile.cpp" line="+33"/>
        <location line="+24"/>
        <source>VHDL file</source>
        <translation>VHDL soubor</translation>
    </message>
    <message>
        <location line="-21"/>
        <source>Name of VHDL file</source>
        <translation>Jméno VHDL souboru</translation>
    </message>
    <message>
        <location line="+107"/>
        <source>vhdl</source>
        <translation>VHDL</translation>
    </message>
    <message>
        <location filename="components/rfedd.cpp" line="+2"/>
        <location filename="components/rfedd2p.cpp" line="+37"/>
        <location filename="components/sparamfile.cpp" line="-48"/>
        <source>representation during DC analysis</source>
        <translation>Reprezentace během DC analýzy</translation>
    </message>
    <message>
        <location filename="components/etr_sim.cpp" line="+3"/>
        <location filename="components/tr_sim.cpp" line="+3"/>
        <source>relax time step raster</source>
        <translation>dovolit nepřesnosti při časových krocích</translation>
    </message>
    <message>
        <location filename="qucs_actions.cpp" line="+1"/>
        <source>Cannot create output file!</source>
        <translation>Nelze vytvořit výstupní soubor!</translation>
    </message>
    <message>
        <location filename="components/capacitor.cpp" line="-2"/>
        <source>initial voltage for transient simulation</source>
        <translation>počáteční napětí pro přechodovou simulaci</translation>
    </message>
    <message>
        <location filename="components/inductor.cpp" line="-14"/>
        <source>initial current for transient simulation</source>
        <translation>počáteční proud pro přechodovou simulaci</translation>
    </message>
    <message>
        <location filename="components/mscross.cpp" line="+6"/>
        <location filename="components/mstee.cpp" line="+2"/>
        <source>show port numbers in symbol or not</source>
        <translation>zobrazit čísla portů v symbolech nebo je skrýt</translation>
    </message>
    <message>
        <location filename="components/opt_sim.cpp" line="+31"/>
        <source>Optimization</source>
        <translation>Optimalizace</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>optimization</source>
        <translation>optimalizace</translation>
    </message>
    <message>
        <location filename="components/etr_sim.cpp" line="+2"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>perform an initial DC analysis</source>
        <translation>spustit počáteční DC analýzu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/tr_sim.cpp" line="+2"/>
        <source>maximum step size in seconds</source>
        <translation>maximální velikost kroku v sekundách</translation>
    </message>
    <message>
        <location filename="components/relais.cpp" line="-43"/>
        <source>relay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+59"/>
        <source>Relay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/irect.cpp" line="-16"/>
        <location filename="components/vrect.cpp" line="-16"/>
        <source>initial delay time</source>
        <translation>počáteční časová prodleva</translation>
    </message>
    <message>
        <location filename="components/bsim3v34nMOS.cpp" line="+15"/>
        <source>bsim3v34nMOS verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location filename="components/bsim3v34pMOS.cpp" line="+18"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location filename="components/bsim4v30nMOS.cpp" line="+19"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location filename="components/bsim4v30pMOS.cpp" line="+18"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>-</source>
        <translation type="unfinished">-</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>bsim3v34nMOS</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL2V2p1.cpp" line="+15"/>
        <source>HICUM Level 2 v2.1 verilog device</source>
        <translation type="unfinished">HICUM zařízení Level 2 v2.1</translation>
    </message>
    <message>
        <location filename="components/hic2_full.cpp" line="+18"/>
        <location filename="components/hicumL2V2p1.cpp" line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="+18"/>
        <location filename="components/hicumL2V2p24.cpp" line="+18"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+18"/>
        <source>GICCR constant</source>
        <translation type="unfinished">GICCR constant</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Zero-bias hole charge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>High-current correction for 2D and 3D effects</source>
        <translation>Korekce vysokého proudu pro 2D a 3D efekty</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+5"/>
        <source>Emitter minority charge weighting factor in HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Collector minority charge weighting factor in HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>B-E depletion charge weighting factor in HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+6"/>
        <source>B-C depletion charge weighting factor in HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Internal B-E saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal B-E current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Internal B-E recombination saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal B-E recombination current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Peripheral B-E saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Peripheral B-E current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Peripheral B-E recombination saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Peripheral B-E recombination current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Non-ideality factor for III-V HBTs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+5"/>
        <location filename="components/hicumL2V2p24.cpp" line="+5"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+5"/>
        <source>Internal B-C saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal B-C current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>External B-C saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>External B-C current ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>B-E tunneling saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Exponent factor for tunneling current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+4"/>
        <location filename="components/hicumL2V2p24.cpp" line="+4"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+4"/>
        <source>Avalanche current factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Exponent factor for avalanche current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Relative TC for FAVL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Relative TC for QAVL</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Zero bias internal base resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="+117"/>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+131"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+131"/>
        <location filename="components/hicumL0V1p3.cpp" line="+135"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>External base series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Factor for geometry dependence of emitter current crowding</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Correction factor for modulation by B-E and B-C space charge layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Ratio of HF shunt to total internal capacitance (lateral NQS effect)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Ration of internal to total minority charge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="+3"/>
        <location filename="components/hic2_full.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Emitter series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>External collector series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Substrate transistor transfer saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Forward ideality factor of substrate transfer current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>C-S diode saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Ideality factor of C-S diode current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Transit time for forward operation of substrate transistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Substrate series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Substrate shunt capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal B-E zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal B-E built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal B-E grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Ratio of maximum to zero-bias value of internal B-E capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Peripheral B-E zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Peripheral B-E built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Peripheral B-E grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Ratio of maximum to zero-bias value of peripheral B-E capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Internal B-C zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal B-C built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal B-C grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Internal B-C punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>External B-C zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>External B-C built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>External B-C grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>External B-C punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location filename="components/hicumL2V2p1.cpp" line="+4"/>
        <location filename="components/hicumL2V2p23.cpp" line="+7"/>
        <location filename="components/hicumL2V2p24.cpp" line="+7"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+7"/>
        <source>C-S zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>C-S built-in potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>C-S grading coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>C-S punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Low current forward transit time at VBC=0V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Time constant for base and B-C space charge layer width modulation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <source>Time constant for modelling carrier jam at low VCE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+6"/>
        <source>Neutral emitter storage time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Exponent factor for current dependence of neutral emitter storage time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Saturation time constant at high current densities</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Smoothing factor for current dependence of base and collector transit time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Partitioning factor for base and collector portion</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Internal collector resistance at low electric field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Voltage separating ohmic and saturation velocity regime</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Internal C-E saturation voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Collector punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Storage time for inverse operation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+13"/>
        <source>Total parasitic B-E capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Total parasitic B-C capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Factor for additional delay time of minority charge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Factor for additional delay time of transfer current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+4"/>
        <location filename="components/hicumL2V2p24.cpp" line="+4"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+4"/>
        <source>Flicker noise coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Flicker noise exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="components/hicumL2V2p1.cpp" line="+4"/>
        <location filename="components/hicumL2V2p23.cpp" line="+4"/>
        <location filename="components/hicumL2V2p24.cpp" line="+4"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+10"/>
        <source>Scaling factor for collector minority charge in direction of emitter width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Scaling factor for collector minority charge in direction of emitter length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Bandgap voltage extrapolated to 0 K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>First order relative TC of parameter T0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Second order relative TC of parameter T0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Temperature exponent for RCI0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+16"/>
        <location filename="components/hicumL2V2p24.cpp" line="+16"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+16"/>
        <source>Temperature exponent of mobility in substrate transistor transit time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-14"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="-14"/>
        <location filename="components/hicumL2V2p24.cpp" line="-14"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-14"/>
        <source>Relative TC of saturation drift velocity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Relative TC of VCES</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Temperature exponent of internal base resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Temperature exponent of external base resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Temperature exponent of external collector resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Temperature exponent of emitter resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+21"/>
        <location filename="components/hicumL2V2p24.cpp" line="+21"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+21"/>
        <source>Relative TC of forward current gain for V2.1 model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="+88"/>
        <location filename="components/hic2_full.cpp" line="+5"/>
        <location filename="components/hicumL0V1p2.cpp" line="+92"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+90"/>
        <location filename="components/hicumL0V1p3.cpp" line="+106"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+5"/>
        <location filename="components/hicumL2V2p24.cpp" line="+5"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+12"/>
        <source>Thermal resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/HBT_X.cpp" line="+30"/>
        <location filename="components/hic0_full.cpp" line="+3"/>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+5"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+8"/>
        <source>Thermal capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic2_full.cpp" line="+5"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+5"/>
        <location filename="components/hicumL2V2p24.cpp" line="+5"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+5"/>
        <source>Temperature at which parameters are specified</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Temperature change w.r.t. chip temperature for particular transistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="+3"/>
        <location filename="components/MESFET.cpp" line="+3"/>
        <location filename="components/bsim3v34nMOS.cpp" line="-19"/>
        <location filename="components/bsim3v34pMOS.cpp" line="+2"/>
        <location filename="components/diac.cpp" line="+4"/>
        <location filename="components/hic0_full.cpp" line="+9"/>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+9"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+20"/>
        <location filename="components/hicumL0V1p3.cpp" line="+9"/>
        <location filename="components/hicumL2V2p1.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <location filename="components/log_amp.cpp" line="+3"/>
        <location filename="components/nigbt.cpp" line="+3"/>
        <location filename="components/photodiode.cpp" line="+33"/>
        <location filename="components/phototransistor.cpp" line="+15"/>
        <location filename="components/potentiometer.cpp" line="+3"/>
        <location filename="components/thyristor.cpp" line="+6"/>
        <location filename="components/triac.cpp" line="+6"/>
        <source>simulation temperature</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/HBT_X.cpp" line="+203"/>
        <source>FBH HBT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-215"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>Ignored</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Device operating temperature, Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Thermal resistance, K/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Scaling factor, number of emitter fingers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Length of emitter finger, m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Width of emitter finger, m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Forward saturation current density, A/um^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Forward current emission coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Forward thermal activation energy, V, (0 == disables temperature dependence)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E leakage saturation current density, A/um^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E leakage emission coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Limiting resistor of B-E leakage diode, Ohm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E leakage thermal activation energy, V, (0 == disables temperature dependence)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>2nd B-E leakage saturation current density, A/um^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>2nd B-E leakage emission coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>2nd Limiting resistor of B-E leakage diode, Ohm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>2nd B-E leakage thermal activation energy, V, (0 == disables temperature dependence)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Reverse saturation current density, A/um^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Reverse current emission coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Reverse thermal activation energy, V, (0 == disables temperature dependence)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Fraction of Cjc that goes to internal base node</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-C leakage saturation current density, A/um^2 (0. switches off diode)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-C leakage emission coefficient (0. switches off diode)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Limiting resistor of B-C leakage diode, Ohm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-C leakage thermal activation energy, V, (0 == disables temperature dependence)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ideal forward beta</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature coefficient of forward current gain, -1/K,  (0 == disables temperature dependence)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ideal reverse beta</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Forward Early voltage, V,  (0 == disables Early Effect)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Reverse Early voltage, V, (0 == disables Early Effect)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Forward high-injection knee current, A, (0 == disables Webster Effect)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Reverse high-injection knee current, A, (0 == disables Webster Effect)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source></source>
        <translation></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>C-E breakdown exponent, (0 == disables collector break-down)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>C-E breakdown factor, (0 == disables collector break-down)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E breakdown voltage, V, (0 == disables emitter break-down)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ideal reverse transit time, s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Ideal forward transit time, s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature coefficient of forward transit time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Excess transit time coefficient at base push-out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Smoothing parameter for Thcs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E zero-bias depletion capacitance, F/um^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E junction exponential factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-E junction built-in potential, V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-C zero-bias depletion capacitance, F/um^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-C junction exponential factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>B-C junction built-in potential, V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>not used</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Minimum B-C depletion capacitance (Vbc dependence), F/um^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Collector current where Cbc reaches Cmin, A/um^2 (0 == disables Cbc reduction)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Fraction of Cmin, lower limit of BC capacitance (Ic dependence)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Onset of base push-out at low voltages, Ohm*um^2 (0 == disables base push-out)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Onset of base push-out at high voltages, A/um^2, (0 == disables base push-out)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Slope of Jk at high currents , Ohm*um^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Voltage shift of base push-out onset, V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Collector resistance, Ohm/finger</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Emitter resistance, Ohm/finger</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Extrinsic base resistance, Ohm/finger</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Inner Base ohmic resistance, Ohm/finger</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Collector inductance, H</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Emitter inductance, H</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Base inductance, H</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Extrinsic B-C capacitance, F</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Extrinsic base capacitance, F</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Extrinsic collector capacitance, F</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+12"/>
        <source>Flicker-noise coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-10"/>
        <location line="+12"/>
        <source>Flicker-noise exponent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-10"/>
        <location line="+12"/>
        <source>Flicker-noise frequency exponent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-10"/>
        <source>Burst noise coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Burst noise exponent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Burst noise corner frequency, Hz</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Ambient temperature at which the parameters were determined</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/bondwire.cpp" line="-35"/>
        <source>bond wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>length of the wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>diameter of the wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>height above ground plane</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>specific resistance of the metal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>relative permeability of the metal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bond wire model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Bond Wire</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/twistedpair.cpp" line="-46"/>
        <source>twisted pair transmission line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+36"/>
        <source>diameter of conductor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>diameter of wire (conductor and insulator)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>dielectric constant of insulator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-2"/>
        <source>twists per length in 1/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Twisted-Pair</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-26"/>
        <source>physical length of the line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/source_ac.cpp" line="-4"/>
        <source>(available) ac power in Watts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/mosfet_sub.cpp" line="+7"/>
        <source>MOS field-effect transistor with substrate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/tline_4port.cpp" line="-34"/>
        <source>ideal 4-terminal transmission line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+50"/>
        <source>4-Terminal Transmission Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/HBT_X.cpp" line="-161"/>
        <source>HBT model by Ferdinand-Braun-Institut (FBH), Berlin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL2V2p1.cpp" line="+19"/>
        <source>HICUM L2 v2.1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/HBT_X.cpp" line="+85"/>
        <source>Extrinsic BC diffusion capacitance, F</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/diode.cpp" line="-30"/>
        <source>high-injection knee current (0=infinity)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/digi_sim.cpp" line="+2"/>
        <source>netlist format</source>
        <translation type="unfinished">formát netlistu</translation>
    </message>
    <message>
        <location filename="components/verilogfile.cpp" line="+33"/>
        <location line="+24"/>
        <source>Verilog file</source>
        <translation type="unfinished">Verilog soubor</translation>
    </message>
    <message>
        <location line="-21"/>
        <source>Name of Verilog file</source>
        <translation type="unfinished">Jméno Verilog souboru</translation>
    </message>
    <message>
        <location line="+93"/>
        <source>verilog</source>
        <translation type="unfinished">verilog</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="-462"/>
        <location filename="components/verilogfile.cpp" line="+45"/>
        <location filename="components/vhdlfile.cpp" line="+76"/>
        <source>ERROR: No file name in %1 component &quot;%2&quot;.</source>
        <translation type="unfinished">Chyba: Chybí jméno souboru v %1 komponenty &quot;%2&quot;.</translation>
    </message>
    <message>
        <location filename="components/verilogfile.cpp" line="+11"/>
        <location filename="components/vhdlfile.cpp" line="+11"/>
        <source>ERROR: Cannot open %1 file &quot;%2&quot;.</source>
        <translation type="unfinished">Chyba: Nelze otevřít %1 souboru &quot;%2&quot;.</translation>
    </message>
    <message>
        <location filename="components/HBT_X.cpp" line="-8"/>
        <source>C-E breakdown voltage, V, (0 == disables collector break-down)</source>
        <translation type="unfinished">Průrazné C-E napětí, V, (0 == deaktivuje průraz kolektoru)</translation>
    </message>
    <message>
        <location filename="components/iexp.cpp" line="+23"/>
        <source>exponential current source</source>
        <translation type="unfinished">exponenciální proudový zdroj</translation>
    </message>
    <message>
        <location line="+34"/>
        <source>current before rising edge</source>
        <translation type="unfinished">proud před vzestupnou hranou</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum current of the pulse</source>
        <translation type="unfinished">maximální proud pulsu</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/vexp.cpp" line="+61"/>
        <source>start time of the exponentially rising edge</source>
        <translation type="unfinished">počátek exponenciální vzestupné hrany</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/vexp.cpp" line="+2"/>
        <source>start of exponential decay</source>
        <translation type="unfinished">počátek exponenciální prodlevy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>time constant of the rising edge</source>
        <translation type="unfinished">časová konstanta vzestupné hrany</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>time constant of the falling edge</source>
        <translation type="unfinished">časová konstanta sestupné hrany</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Exponential Current Pulse</source>
        <translation type="unfinished">Exponenciální proudový zdroj</translation>
    </message>
    <message>
        <location filename="components/vexp.cpp" line="-40"/>
        <source>exponential voltage source</source>
        <translation type="unfinished">exponenciální napěťový zdroj</translation>
    </message>
    <message>
        <location line="+34"/>
        <source>voltage before rising edge</source>
        <translation type="unfinished">Napětí před vzestupnou hranou</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum voltage of the pulse</source>
        <translation type="unfinished">maximální napětí pulsu</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>rise time of the rising edge</source>
        <translation type="unfinished">doba trvání vzestupné hrany</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fall time of the falling edge</source>
        <translation type="unfinished">doba trvání sestupné hrany</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Exponential Voltage Pulse</source>
        <translation type="unfinished">exponenciální napěťový puls</translation>
    </message>
    <message>
        <location filename="components/hicumL2V2p1.cpp" line="-105"/>
        <source>Partitioning factor of parasitic B-C capacitance</source>
        <translation type="unfinished">Dělící faktor parazitní B-C kapacity</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>Noise factor for internal base resistance</source>
        <translation type="unfinished">Šumový faktor vnitřního odporu báze</translation>
    </message>
    <message>
        <location filename="components/eqndefined.cpp" line="+27"/>
        <source>equation defined device</source>
        <translation type="unfinished">komponenta definovaná rovnicí</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>type of equations</source>
        <translation type="unfinished">typ rovnic</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>number of branches</source>
        <translation type="unfinished">počet závorek</translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+74"/>
        <source>current equation</source>
        <translation type="unfinished">aktuální rovnice</translation>
    </message>
    <message>
        <location line="-72"/>
        <location line="+74"/>
        <source>charge equation</source>
        <translation type="unfinished">rovnice náboje</translation>
    </message>
    <message>
        <location line="-56"/>
        <source>Equation Defined Device</source>
        <translation type="unfinished">Komponenta definovaná rovnicí</translation>
    </message>
    <message>
        <location filename="components/spicefile.cpp" line="-180"/>
        <source>ERROR: Cannot open SPICE file &quot;%1&quot;.</source>
        <translation type="unfinished">CHYBA: Nelze otevřít SPICE soubor &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+173"/>
        <source>ERROR: Cannot start QucsConv!</source>
        <translation type="unfinished">CHYBA: Program QucsConv nelze spustit!</translation>
    </message>
    <message>
        <location line="-160"/>
        <source>ERROR: Cannot save converted SPICE file &quot;%1&quot;.</source>
        <translation type="unfinished">CHYBA: Nelze uložit převedený SPICE soubor &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>ERROR: Cannot open converted SPICE file &quot;%1&quot;.</source>
        <translation type="unfinished">CHYBA: Nelze otevřít transformovaný SPICE soubor &quot;%1&quot;.</translation>
    </message>
    <message>
        <source>Converting ...</source>
        <translation type="obsolete">Konverze ...</translation>
    </message>
    <message>
        <location filename="dialogs/librarydialog.cpp" line="+206"/>
        <source>ERROR: Cannot open file &quot;%1&quot;.
</source>
        <translation type="unfinished">CHYBA: Nelze otevřít soubor &quot;%1&quot;.
</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>ERROR: Cannot create user library subdirectory !
</source>
        <translation type="unfinished">CHYBA: Nelze vytvořit podadresář s uživatelskou knihovnou !
</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>ERROR: Cannot create file &quot;%1&quot;.
</source>
        <translation type="unfinished">CHYBA: Nelze vytvořit soubor &quot;%1&quot;.
</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="-58"/>
        <source>WARNING: Skipping library component &quot;%1&quot;.</source>
        <translation type="unfinished">UPOZORNĚNÍ: Bude přeskočena zaknihovaná komponenta &quot;%1&quot;.</translation>
    </message>
    <message>
        <location filename="components/spicefile.cpp" line="+153"/>
        <source>Converting SPICE file &quot;%1&quot;.</source>
        <translation type="unfinished">Převod SPICE souboru &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="-87"/>
        <source>Preprocessing SPICE file &quot;%1&quot;.</source>
        <translation type="unfinished">Příprava SPICE souboru &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>ERROR: Cannot save preprocessed SPICE file &quot;%1&quot;.</source>
        <translation type="unfinished">CHYBA: Nelze uložit zpracovaný SPICE soubor &quot;%1&quot;.</translation>
    </message>
    <message>
        <source>Cannot execute</source>
        <translation type="obsolete">Nelze spustit</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>ERROR: Cannot execute &quot;%1&quot;.</source>
        <translation>CHYBA: Nelze spustit &quot;%1&quot;.</translation>
    </message>
    <message>
        <location filename="components/vfile.cpp" line="-36"/>
        <source>file based voltage source</source>
        <translation type="unfinished">Napěťový zdroje ze souboru</translation>
    </message>
    <message>
        <location filename="components/ifile.cpp" line="-2"/>
        <location filename="components/vfile.cpp" line="+31"/>
        <source>name of the sample file</source>
        <translation type="unfinished">jméno souboru s navzorkovanými hodnotami</translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="components/vfile.cpp" line="+4"/>
        <source>repeat waveform</source>
        <translation type="unfinished">zopakovat formu signálu</translation>
    </message>
    <message>
        <location filename="components/vfile.cpp" line="+18"/>
        <source>File Based Voltage Source</source>
        <translation type="unfinished">Napěťový zdroj ze souboru</translation>
    </message>
    <message>
        <location filename="components/ifile.cpp" line="-33"/>
        <source>file based current source</source>
        <translation type="unfinished">proudový zdroj ze souboru</translation>
    </message>
    <message>
        <location line="+34"/>
        <source>current gain</source>
        <translation type="unfinished">proudové zesílení</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>File Based Current Source</source>
        <translation type="unfinished">Proudový zdroj ze souboru </translation>
    </message>
    <message>
        <location filename="components/mod_amp.cpp" line="+15"/>
        <source>Modular Operational Amplifier verilog device</source>
        <translation type="unfinished">Modulární verilog model operačního zesilovače</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Gain bandwidth product (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Open-loop differential gain at DC (dB)</source>
        <translation type="unfinished">Diferenciální DC zesílení otevřeného obvodu (dB)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Second pole frequency (Hz)</source>
        <translation type="unfinished">Frekvence druhého pólu (Hz)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Output resistance (Ohm)</source>
        <translation type="unfinished">Výstupní odpor (Ohm)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Differential input capacitance (F)</source>
        <translation type="unfinished">Rozdílová vstupní kapacita (F)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Differential input resistance (Ohm)</source>
        <translation type="unfinished">Rozdílový vstupní odpor (Ohm)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Input offset current (A)</source>
        <translation type="unfinished">Vstupní offset proud (A)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Input bias current (A)</source>
        <translation type="unfinished">Vstupní bias proud (A)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Input offset voltage (V)</source>
        <translation type="unfinished">Vstupní offset napětí (V)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Common-mode rejection ratio at DC (dB)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Common-mode zero corner frequency (Hz)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Positive slew rate (V/s)</source>
        <translation type="unfinished">Strmost vzestupné hrany (V/s)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Negative slew rate (V/s)</source>
        <translation type="unfinished">Strmost sestupné hrany (V/s) </translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Positive output voltage limit (V)</source>
        <translation type="unfinished">Pozitivní omezení výstupního napětí (V)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Negative output voltage limit (V)</source>
        <translation type="unfinished">Negativní omezení výstupního napětí (V)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Maximum DC output current (A)</source>
        <translation type="unfinished">Maximální výstupní DC proud (A)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Current limit scale factor</source>
        <translation type="unfinished">Měřítko pro proudové omezení</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Modular OpAmp</source>
        <translation type="unfinished">Modulární OpAmp</translation>
    </message>
    <message>
        <location filename="components/hic2_full.cpp" line="-290"/>
        <source>HICUM Level 2 v2.22 verilog device</source>
        <translation type="unfinished">HICUM Level 2 v2.22 Verilog model</translation>
    </message>
    <message>
        <location line="+42"/>
        <location filename="components/hicumL2V2p23.cpp" line="-248"/>
        <location filename="components/hicumL2V2p24.cpp" line="-248"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-276"/>
        <source>Base current recombination time constant at B-C barrier for high forward injection</source>
        <translation type="unfinished">Rekombinační časová konstanta na B-C přechodu pro velkou dopřednou injekci</translation>
    </message>
    <message>
        <location line="+18"/>
        <location filename="components/hicumL2V2p23.cpp" line="+18"/>
        <location filename="components/hicumL2V2p24.cpp" line="+18"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+18"/>
        <source>Specifies the base node connection for the tunneling current</source>
        <translation type="unfinished">Udává základní spojovací uzel pro tunelový proud</translation>
    </message>
    <message>
        <location line="+95"/>
        <location filename="components/hicumL2V2p23.cpp" line="+95"/>
        <location filename="components/hicumL2V2p24.cpp" line="+95"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+95"/>
        <source>Partitioning factor of parasitic B-C cap</source>
        <translation type="unfinished">Dělící faktor parazitní B-C kapacity</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Partitioning factor of parasitic B-E cap</source>
        <translation type="unfinished">Dělící faktor parazitní B-E kapacity</translation>
    </message>
    <message>
        <location line="+59"/>
        <location filename="components/hicumL2V2p23.cpp" line="+59"/>
        <location filename="components/hicumL2V2p24.cpp" line="+59"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+69"/>
        <source>Flag for turning on and off of vertical NQS effect</source>
        <translation type="unfinished">Vypíná nebo zapíná vertikállní NQS efekt</translation>
    </message>
    <message>
        <location line="+6"/>
        <location filename="components/hicumL2V2p23.cpp" line="+6"/>
        <location filename="components/hicumL2V2p24.cpp" line="+6"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+6"/>
        <source>Flag for determining where to tag the flicker noise source</source>
        <translation type="unfinished">Udává kde bude umístěn 1/f šumový zdroj</translation>
    </message>
    <message>
        <location line="+32"/>
        <location filename="components/hicumL2V2p23.cpp" line="+32"/>
        <location filename="components/hicumL2V2p24.cpp" line="+32"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+38"/>
        <source>Effective emitter bandgap voltage</source>
        <translation type="unfinished">Efektivní bandgap napětí emitoru</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Effective collector bandgap voltage</source>
        <translation type="unfinished">Efektivní bandgap napětí kolektoru</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Effective substrate bandgap voltage</source>
        <translation type="unfinished">Efektivní bandgap napětí substrátu</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>Coefficient K1 in T-dependent band-gap equation</source>
        <translation type="unfinished">Koeficient K1 v &quot;T&quot; závilé bandgap rovnici</translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Coefficient K2 in T-dependent band-gap equation</source>
        <translation type="unfinished">Koeficient K2 v &quot;T&quot; závilé bandgap rovnici</translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="-40"/>
        <location filename="components/hic2_full.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="-44"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-55"/>
        <location filename="components/hicumL0V1p3.cpp" line="-58"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Exponent coefficient in transfer current temperature dependence</source>
        <translation type="unfinished">Exponentiální koeficient teplotní závislosti přenosového proudu</translation>
    </message>
    <message>
        <location filename="components/hic2_full.cpp" line="+2"/>
        <location filename="components/hicumL2V2p23.cpp" line="+2"/>
        <location filename="components/hicumL2V2p24.cpp" line="+2"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+2"/>
        <source>Exponent coefficient in B-E junction current temperature dependence</source>
        <translation type="unfinished">Exponentiální koeficient teplotní závislosti proudu B-E přechodu</translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="components/hicumL2V2p23.cpp" line="+5"/>
        <location filename="components/hicumL2V2p24.cpp" line="+5"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+12"/>
        <source>Flag for turning on and off self-heating effect</source>
        <translation type="unfinished">Vypíná nebo vypíná self-heating efekt</translation>
    </message>
    <message>
        <location line="+8"/>
        <location filename="components/hicumL2V2p23.cpp" line="+8"/>
        <location filename="components/hicumL2V2p24.cpp" line="+8"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+13"/>
        <source>Flag for compatibility with v2.1 model (0=v2.1)</source>
        <translation type="unfinished">Přepínač pro kompatibilitu s modelem v2.1 (0=v2.1)</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>HICUM L2 v2.22</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-305"/>
        <location filename="components/hicumL2V2p23.cpp" line="-278"/>
        <location filename="components/hicumL2V2p24.cpp" line="-278"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-312"/>
        <source>A^2s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+59"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location line="+59"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location line="+59"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <location line="+65"/>
        <source>Coul</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-30"/>
        <location line="+6"/>
        <location filename="components/MESFET.cpp" line="-17"/>
        <location filename="components/hic0_full.cpp" line="-183"/>
        <location line="+10"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+93"/>
        <location line="+5"/>
        <location filename="components/hic2_full.cpp" line="-56"/>
        <location line="+11"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+39"/>
        <location line="+5"/>
        <location filename="components/hicumL0V1p2.cpp" line="-197"/>
        <location line="+13"/>
        <location line="+5"/>
        <location line="+3"/>
        <location line="+7"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+100"/>
        <location line="+5"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-197"/>
        <location line="+13"/>
        <location line="+5"/>
        <location line="+3"/>
        <location line="+7"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+100"/>
        <location line="+5"/>
        <location line="+107"/>
        <location filename="components/hicumL0V1p3.cpp" line="-201"/>
        <location line="+17"/>
        <location line="+5"/>
        <location line="+3"/>
        <location line="+7"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+100"/>
        <location line="+5"/>
        <location filename="components/hicumL2V2p23.cpp" line="-56"/>
        <location line="+11"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+39"/>
        <location line="+5"/>
        <location filename="components/hicumL2V2p24.cpp" line="-56"/>
        <location line="+11"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+39"/>
        <location line="+5"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-62"/>
        <location line="+17"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+5"/>
        <location line="+39"/>
        <location line="+5"/>
        <location line="+110"/>
        <location filename="components/log_amp.cpp" line="-40"/>
        <location line="+3"/>
        <location filename="components/photodiode.cpp" line="-51"/>
        <location line="+6"/>
        <location filename="components/phototransistor.cpp" line="-68"/>
        <location line="+35"/>
        <location line="+3"/>
        <source>A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/DLS_1ton.cpp" line="+21"/>
        <location filename="components/DLS_nto1.cpp" line="+22"/>
        <location filename="components/EKV26MOS.cpp" line="+15"/>
        <location filename="components/MESFET.cpp" line="-65"/>
        <location filename="components/andor4x2.cpp" line="+32"/>
        <location filename="components/andor4x3.cpp" line="+32"/>
        <location filename="components/andor4x4.cpp" line="+32"/>
        <location filename="components/binarytogrey4bit.cpp" line="+32"/>
        <location filename="components/comp_1bit.cpp" line="+32"/>
        <location filename="components/comp_2bit.cpp" line="+32"/>
        <location filename="components/comp_4bit.cpp" line="+32"/>
        <location filename="components/dff_SR.cpp" line="+34"/>
        <location filename="components/dmux2to4.cpp" line="+32"/>
        <location filename="components/dmux3to8.cpp" line="+33"/>
        <location filename="components/dmux4to16.cpp" line="+32"/>
        <location filename="components/fa1b.cpp" line="+32"/>
        <location filename="components/fa2b.cpp" line="+32"/>
        <location filename="components/gatedDlatch.cpp" line="+34"/>
        <location filename="components/greytobinary4bit.cpp" line="+32"/>
        <location filename="components/ha1b.cpp" line="+32"/>
        <location filename="components/hic0_full.cpp" line="-83"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+5"/>
        <location filename="components/hic2_full.cpp" line="-57"/>
        <location line="+62"/>
        <location line="+66"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+19"/>
        <location filename="components/hicumL0V1p2.cpp" line="-83"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+5"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-190"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+5"/>
        <location filename="components/hicumL0V1p3.cpp" line="-83"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+5"/>
        <location filename="components/hicumL2V2p23.cpp" line="-57"/>
        <location line="+62"/>
        <location line="+66"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+19"/>
        <location filename="components/hicumL2V2p24.cpp" line="-57"/>
        <location line="+62"/>
        <location line="+66"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+19"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-167"/>
        <location line="+62"/>
        <location line="+66"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+19"/>
        <location filename="components/hpribin4bit.cpp" line="+32"/>
        <location filename="components/jkff_SR.cpp" line="+34"/>
        <location filename="components/mux2to1.cpp" line="+32"/>
        <location filename="components/mux4to1.cpp" line="+32"/>
        <location filename="components/mux8to1.cpp" line="+32"/>
        <location filename="components/nigbt.cpp" line="-41"/>
        <location filename="components/photodiode.cpp" line="+18"/>
        <location filename="components/phototransistor.cpp" line="-9"/>
        <location line="+3"/>
        <location filename="components/tff_SR.cpp" line="+34"/>
        <source>s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-96"/>
        <location filename="components/MESFET.cpp" line="-42"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hic2_full.cpp" line="-141"/>
        <location filename="components/hicumL2V2p23.cpp" line="-141"/>
        <location filename="components/hicumL2V2p24.cpp" line="-141"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-141"/>
        <location filename="components/nigbt.cpp" line="+30"/>
        <source>1/V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+28"/>
        <location filename="components/hic0_full.cpp" line="+113"/>
        <location line="+12"/>
        <location line="+3"/>
        <location line="+11"/>
        <location line="+3"/>
        <location filename="components/hic2_full.cpp" line="+6"/>
        <location line="+3"/>
        <location line="+160"/>
        <location line="+7"/>
        <location line="+3"/>
        <location line="+30"/>
        <location filename="components/hicumL0V1p2.cpp" line="+113"/>
        <location line="+12"/>
        <location line="+3"/>
        <location line="+13"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+113"/>
        <location line="+12"/>
        <location line="+3"/>
        <location line="+13"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+113"/>
        <location line="+12"/>
        <location line="+3"/>
        <location line="+13"/>
        <location line="+3"/>
        <location line="+13"/>
        <location filename="components/hicumL2V2p23.cpp" line="+6"/>
        <location line="+3"/>
        <location line="+160"/>
        <location line="+7"/>
        <location line="+3"/>
        <location line="+30"/>
        <location filename="components/hicumL2V2p24.cpp" line="+6"/>
        <location line="+3"/>
        <location line="+160"/>
        <location line="+7"/>
        <location line="+3"/>
        <location line="+30"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+6"/>
        <location line="+3"/>
        <location line="+176"/>
        <location line="+7"/>
        <location line="+3"/>
        <location line="+30"/>
        <location line="+17"/>
        <source>1/K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+3"/>
        <location filename="components/MESFET.cpp" line="+39"/>
        <location filename="components/hic0_full.cpp" line="-139"/>
        <location line="+36"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hic2_full.cpp" line="-197"/>
        <location line="+3"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+16"/>
        <location line="+84"/>
        <location filename="components/hicumL0V1p2.cpp" line="-141"/>
        <location line="+36"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-141"/>
        <location line="+36"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="-154"/>
        <location line="+36"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="-197"/>
        <location line="+3"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+16"/>
        <location line="+84"/>
        <location filename="components/hicumL2V2p24.cpp" line="-197"/>
        <location line="+3"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+16"/>
        <location line="+84"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-230"/>
        <location line="+3"/>
        <location line="+11"/>
        <location line="+3"/>
        <location line="+16"/>
        <location line="+84"/>
        <location filename="components/log_amp.cpp" line="+11"/>
        <location line="+6"/>
        <location filename="components/photodiode.cpp" line="-27"/>
        <location line="+38"/>
        <location filename="components/phototransistor.cpp" line="+9"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/potentiometer.cpp" line="-27"/>
        <location line="+19"/>
        <source>Ohm</source>
        <translation type="unfinished">Ohmů</translation>
    </message>
    <message>
        <location line="+47"/>
        <location filename="components/MESFET.cpp" line="+10"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hic0_full.cpp" line="-85"/>
        <location line="+44"/>
        <location line="+11"/>
        <location line="+43"/>
        <location line="+11"/>
        <location line="+3"/>
        <location filename="components/hic2_full.cpp" line="-81"/>
        <location line="+3"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+11"/>
        <location line="+15"/>
        <location line="+47"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="-92"/>
        <location line="+51"/>
        <location line="+11"/>
        <location line="+43"/>
        <location line="+11"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-92"/>
        <location line="+51"/>
        <location line="+11"/>
        <location line="+43"/>
        <location line="+11"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="-92"/>
        <location line="+51"/>
        <location line="+11"/>
        <location line="+43"/>
        <location line="+11"/>
        <location line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="-81"/>
        <location line="+3"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+11"/>
        <location line="+15"/>
        <location line="+47"/>
        <location line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="-81"/>
        <location line="+3"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+11"/>
        <location line="+15"/>
        <location line="+47"/>
        <location line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-81"/>
        <location line="+3"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+11"/>
        <location line="+15"/>
        <location line="+57"/>
        <location line="+3"/>
        <location filename="components/photodiode.cpp" line="-23"/>
        <location filename="components/phototransistor.cpp" line="-29"/>
        <location line="+8"/>
        <source>F</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/DLS_nto1.cpp" line="-3"/>
        <location filename="components/EKV26MOS.cpp" line="-99"/>
        <location line="+6"/>
        <location line="+84"/>
        <location line="+6"/>
        <location filename="components/MESFET.cpp" line="-67"/>
        <location line="+20"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+12"/>
        <location line="+3"/>
        <location filename="components/hic0_full.cpp" line="-141"/>
        <location line="+32"/>
        <location line="+32"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+8"/>
        <location line="+3"/>
        <location line="+27"/>
        <location line="+5"/>
        <location line="+18"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hic2_full.cpp" line="-93"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+27"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+28"/>
        <location line="+26"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="-155"/>
        <location line="+3"/>
        <location line="+36"/>
        <location line="+7"/>
        <location line="+32"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+8"/>
        <location line="+3"/>
        <location line="+27"/>
        <location line="+5"/>
        <location line="+18"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-155"/>
        <location line="+3"/>
        <location line="+36"/>
        <location line="+7"/>
        <location line="+32"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+8"/>
        <location line="+3"/>
        <location line="+27"/>
        <location line="+5"/>
        <location line="+18"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="-157"/>
        <location line="+3"/>
        <location line="+38"/>
        <location line="+7"/>
        <location line="+32"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+8"/>
        <location line="+3"/>
        <location line="+27"/>
        <location line="+5"/>
        <location line="+18"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="-93"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+27"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+28"/>
        <location line="+26"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="-93"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+27"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+28"/>
        <location line="+26"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="-103"/>
        <location line="+10"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+6"/>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+27"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+6"/>
        <location line="+38"/>
        <location line="+26"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+14"/>
        <location filename="components/log_amp.cpp" line="-9"/>
        <location filename="components/logic_0.cpp" line="+29"/>
        <location filename="components/logic_1.cpp" line="+29"/>
        <location filename="components/nigbt.cpp" line="+3"/>
        <location line="+3"/>
        <location filename="components/photodiode.cpp" line="-9"/>
        <location line="+6"/>
        <location filename="components/phototransistor.cpp" line="-19"/>
        <location line="+3"/>
        <location line="+5"/>
        <location line="+8"/>
        <source>V</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="+43"/>
        <location filename="components/hic2_full.cpp" line="+16"/>
        <location filename="components/hicumL0V1p2.cpp" line="+47"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+45"/>
        <location filename="components/hicumL0V1p3.cpp" line="+61"/>
        <location filename="components/hicumL2V2p23.cpp" line="+16"/>
        <location filename="components/hicumL2V2p24.cpp" line="+16"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+9"/>
        <source>K/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+8"/>
        <source>J/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="+6"/>
        <location filename="components/hic2_full.cpp" line="+5"/>
        <location filename="components/hicumL0V1p2.cpp" line="+6"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+8"/>
        <location filename="components/hicumL0V1p3.cpp" line="+6"/>
        <location filename="components/hicumL2V2p23.cpp" line="+5"/>
        <location filename="components/hicumL2V2p24.cpp" line="+5"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+5"/>
        <source>C</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hic2_full.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <location filename="components/hicumL2V2p23.cpp" line="+3"/>
        <location filename="components/hicumL2V2p24.cpp" line="+3"/>
        <location filename="components/hicumL2V2p31n.cpp" line="+3"/>
        <source>K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/diac.cpp" line="-36"/>
        <source>diac (bidirectional trigger diode)</source>
        <translation type="unfinished">diak (bidirectional trigger diode)</translation>
    </message>
    <message>
        <location line="+24"/>
        <location filename="components/triac.cpp" line="-14"/>
        <source>(bidirectional) breakover voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>(bidirectional) breakover current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/thyristor.cpp" line="-10"/>
        <location filename="components/triac.cpp" line="+4"/>
        <source>parasitic capacitance</source>
        <translation type="unfinished">parazitní kapacitance</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Diac</source>
        <translation type="unfinished">Diak</translation>
    </message>
    <message>
        <location filename="components/thyristor.cpp" line="-28"/>
        <source>silicon controlled rectifier (SCR)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>breakover voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate trigger current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Thyristor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/triac.cpp" line="-32"/>
        <source>triac (bidirectional thyristor)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+30"/>
        <source>(bidirectional) gate trigger current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Triac</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/diac.cpp" line="-12"/>
        <location filename="components/thyristor.cpp" line="-14"/>
        <location filename="components/triac.cpp" line="-14"/>
        <source>intrinsic junction resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/log_amp.cpp" line="-20"/>
        <source>Logarithmic Amplifier verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>scale factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>scale factor error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+11"/>
        <location filename="components/photodiode.cpp" line="+29"/>
        <location filename="components/potentiometer.cpp" line="-6"/>
        <location line="+3"/>
        <source>%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-9"/>
        <source>input I1 bias current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>input reference bias current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>number of decades</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/potentiometer.cpp" line="-4"/>
        <source>conformity error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>output offset error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>amplifier input resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>amplifier 3dB frequency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hz</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>amplifier output resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>conformity error temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/MESFET.cpp" line="+29"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/log_amp.cpp" line="+1"/>
        <location line="+6"/>
        <source>%/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/log_amp.cpp" line="-4"/>
        <source>offset temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>V/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>scale factor error temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>input I1 bias current temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <source>A/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>input reference bias current temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="+19"/>
        <location filename="components/MESFET.cpp" line="+52"/>
        <location filename="components/log_amp.cpp" line="+4"/>
        <location filename="components/nigbt.cpp" line="+3"/>
        <location line="+3"/>
        <location filename="components/photodiode.cpp" line="-19"/>
        <location filename="components/potentiometer.cpp" line="+13"/>
        <source>Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/log_amp.cpp" line="+21"/>
        <source>Logarithmic Amplifier</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/MESFET.cpp" line="-95"/>
        <location filename="components/log_amp.cpp" line="+20"/>
        <source>I</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/log_amp.cpp" line="+1"/>
        <source>R</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="-227"/>
        <source>HICUM Level 0 v1.12 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="components/hicumL0V1p2.cpp" line="-240"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-240"/>
        <location filename="components/hicumL0V1p3.cpp" line="-258"/>
        <source>(Modified) saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+5"/>
        <source>Non-ideality coefficient of forward collector current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Non-ideality coefficient of reverse collector current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+100"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location line="+114"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location line="+114"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <location line="+116"/>
        <location line="+3"/>
        <source>forward Early voltage (normalization volt.)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-97"/>
        <location filename="components/hicumL0V1p2.cpp" line="-106"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-106"/>
        <location filename="components/hicumL0V1p3.cpp" line="-106"/>
        <source>inverse d.c. high-injection roll-off current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>high-injection correction current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>high-injection correction factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+4"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+7"/>
        <location filename="components/hicumL0V1p3.cpp" line="+4"/>
        <source>BE saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>BE non-ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>BE recombination saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>BE recombination non-ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>BC saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>BC non-ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Zero-bias BE depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>BE built-in voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>BE exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Ratio of maximum to zero-bias value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+9"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+9"/>
        <location filename="components/hicumL0V1p3.cpp" line="+9"/>
        <source>low current transit time at Vbici=0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <location filename="components/hicumL0V1p2.cpp" line="+6"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+6"/>
        <location filename="components/hicumL0V1p3.cpp" line="+6"/>
        <source>SCR width modulation contribution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Storage time in neutral emitter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="components/hicumL0V1p2.cpp" line="+5"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+5"/>
        <location filename="components/hicumL0V1p3.cpp" line="+5"/>
        <source>Saturation time at high current densities</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="components/hicumL0V1p2.cpp" line="+5"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+5"/>
        <location filename="components/hicumL0V1p3.cpp" line="+5"/>
        <source>Storage time at inverse operation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Low-field collector resistance under emitter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Voltage dividing ohmic and satur.region</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+25"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location line="+25"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location line="+25"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <location line="+25"/>
        <source>Punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-22"/>
        <location filename="components/hicumL0V1p2.cpp" line="-22"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-22"/>
        <location filename="components/hicumL0V1p3.cpp" line="-22"/>
        <source>Saturation voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Total zero-bias BC depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>BC built-in voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>BC exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Punch-through voltage of BC junction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Zero-bias external BC depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>External BC built-in voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>External BC exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="components/hicumL0V1p2.cpp" line="+5"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+5"/>
        <location filename="components/hicumL0V1p3.cpp" line="+5"/>
        <source>Split factor = Cjci0/Cjc0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Internal base resistance at zero-bias</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <location filename="components/hicumL0V1p2.cpp" line="+9"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+9"/>
        <location filename="components/hicumL0V1p3.cpp" line="+9"/>
        <source>Geometry factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <location filename="components/hicumL0V1p2.cpp" line="+14"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+14"/>
        <location filename="components/hicumL0V1p3.cpp" line="+14"/>
        <source>Substrate transistor transfer current non-ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>SC saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>SC non-ideality factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Zero-bias SC depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>SC built-in voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>External SC exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>SC punch-through voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Collector-base isolation (overlap) capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Emitter-base oxide capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Prefactor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>M^(1-AF)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>flicker noise exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Bandgap-voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Effective emitter bandgap-voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Effective collector bandgap-voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Effective substrate bandgap-voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Coefficient K1 in T-dependent bandgap equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-82"/>
        <location filename="components/hic0_full.cpp" line="+1"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+1"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+1"/>
        <location line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+1"/>
        <location line="+3"/>
        <source>V/K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="-1"/>
        <location filename="components/hicumL0V1p2.cpp" line="-1"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-1"/>
        <location filename="components/hicumL0V1p3.cpp" line="-1"/>
        <source>Coefficient K2 in T-dependent bandgap equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Frist-order TC of tf0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Second-order TC of tf0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="components/hicumL0V1p2.cpp" line="+1"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+1"/>
        <location filename="components/hicumL0V1p3.cpp" line="+1"/>
        <location line="+44"/>
        <source>1/K^2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="components/hicumL0V1p2.cpp" line="+4"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+4"/>
        <location filename="components/hicumL0V1p3.cpp" line="-40"/>
        <source>Exponent coefficient in BE junction current temperature dependence</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>TC of epi-collector diffusivity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Relative TC of satur.drift velocity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Relative TC of vces</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>TC of internal base resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>TC of external base resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>TC of external collector resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>TC of emitter resistances</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+4"/>
        <location filename="components/hicumL0V1p3.cpp" line="+4"/>
        <source>TC of avalanche prefactor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>TC of avalanche exponential factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+5"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+10"/>
        <location filename="components/hicumL0V1p3.cpp" line="+19"/>
        <source>Flag for self-heating calculation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <location filename="components/hicumL0V1p2.cpp" line="+6"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+8"/>
        <location filename="components/hicumL0V1p3.cpp" line="+6"/>
        <source>Ws/K</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/hicumL0V1p2.cpp" line="+2"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+2"/>
        <location filename="components/hicumL0V1p3.cpp" line="+2"/>
        <source>Temperature for which parameters are valid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2.cpp" line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>Temperature change for particular transistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>npn HICUM L0 v1.12</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>pnp HICUM L0 v1.12</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-203"/>
        <location filename="components/hicumL0V1p2.cpp" line="-176"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-176"/>
        <location filename="components/hicumL0V1p3.cpp" line="-190"/>
        <source>Base width modulation contribution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/MESFET.cpp" line="+61"/>
        <location filename="components/thyristor.cpp" line="+2"/>
        <location filename="components/triac.cpp" line="+2"/>
        <source>gate resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/potentiometer.cpp" line="-29"/>
        <source>Potentiometer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>nominal device resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>shaft/wiper arm rotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/msrstub.cpp" line="+6"/>
        <location filename="components/potentiometer.cpp" line="+1"/>
        <location line="+7"/>
        <source>degrees</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/potentiometer.cpp" line="-5"/>
        <source>resistive law taper coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>device type selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum shaft/wiper rotation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>linearity error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>wiper arm contact resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>resistance temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>PPM/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Potentiometer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+34"/>
        <source>B</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>T</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/rfedd.cpp" line="-11"/>
        <source>equation defined RF device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <location filename="components/rfedd2p.cpp" line="-2"/>
        <source>type of parameters</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+81"/>
        <location line="+5"/>
        <location line="+9"/>
        <location filename="components/rfedd2p.cpp" line="+7"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>parameter equation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-77"/>
        <source>Equation Defined RF Device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+90"/>
        <source>RF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/rfedd2p.cpp" line="-20"/>
        <source>equation defined 2-port RF device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Equation Defined 2-port RF Device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/MESFET.cpp" line="-100"/>
        <source>MESFET verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>model selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>pinch-off voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>A/(V*V)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>saturation voltage parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>channel length modulation parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>doping profile parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>power law exponent parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>power feedback parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>1/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum junction voltage limit before capacitance limiting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>capacitance saturation transition voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>capacitance threshold transition voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>dc drain pull coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>subthreshold conductance parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>diode saturation current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>diode emission coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>built-in gate potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate-drain junction reverse bias breakdown voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>diode saturation current temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>transit time under gate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>channel resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>area factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/photodiode.cpp" line="+9"/>
        <source>energy gap</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="components/photodiode.cpp" line="+1"/>
        <source>eV</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>zero bias gate-drain junction capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero bias gate-source junction capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero bias drain-source junction capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Beta temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Alpha temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Gamma temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Subthreshold slope gate parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>subthreshold drain pull parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-source current equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-drain current equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-source charge equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate-drain charge equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>drain-source charge equation selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+15"/>
        <location line="+3"/>
        <source>Ohms</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-22"/>
        <source>drain resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>source resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate resistance temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <location line="+3"/>
        <source>1/Celsius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-4"/>
        <source>drain resistance temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>source resistance temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate reverse breakdown currrent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>forward bias slope resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>breakdown slope resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>shot noise coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>MESFET</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-58"/>
        <source>long = 1, short = 2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>length parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <location line="+10"/>
        <location line="+3"/>
        <location line="+3"/>
        <location line="+33"/>
        <location line="+13"/>
        <location line="+36"/>
        <location filename="components/nigbt.cpp" line="-39"/>
        <source>m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-99"/>
        <source>Width parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>parallel multiple device number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>series multiple device number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>gate oxide capacitance per unit area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>F/m**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>metallurgical junction depth</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>channel width correction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>channel length correction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>long channel threshold voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>body effect parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>V**(1/2)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>bulk Fermi potential</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="components/nigbt.cpp" line="-6"/>
        <source>A/V**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>mobility reduction coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>mobility coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <location line="+49"/>
        <source>V/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-50"/>
        <location line="+7"/>
        <source>longitudinal critical field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-4"/>
        <source>depletion length coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>narrow-channel effect coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>reverse short channel charge density</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>A*s/m**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>characteristic length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>threshold voltage temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>mobility temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Longitudinal critical field temperature exponent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ibb temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>heavily doped diffusion length</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>drain/source diffusion sheet resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ohm/square</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>source contact resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>drain contact resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate to source overlap capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <location line="+3"/>
        <location filename="components/rlcg.cpp" line="-6"/>
        <source>F/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-4"/>
        <source>gate to drain overlap capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate to bulk overlap capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>first impact ionization coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>1/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>second impact ionization coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>saturation voltage factor for impact ionization</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>area related theshold voltage mismatch parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>V*m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>area related gain mismatch parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>area related body effect mismatch parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>sqrt(V)*m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <location filename="components/photodiode.cpp" line="-13"/>
        <source>diode relative area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>EPFL-EKV NMOS 2.6</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>EPFL-EKV PMOS 2.6</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/amplifier.cpp" line="-14"/>
        <source>noise figure</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/rectline.cpp" line="-6"/>
        <source>widest side</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>shortest side</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-30"/>
        <location line="+59"/>
        <source>Rectangular Waveguide</source>
        <translation type="unfinished">Obdélníkový vodič</translation>
    </message>
    <message>
        <location filename="components/hicumL0V1p2.cpp" line="-68"/>
        <source>HICUM Level 0 v1.2 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+15"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-53"/>
        <location filename="components/hicumL0V1p3.cpp" line="-55"/>
        <source>reverse Early voltage (normalization volt.)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+251"/>
        <source>npn HICUM L0 v1.2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>pnp HICUM L0 v1.2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-33"/>
        <source>charge partition parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL2V2p23.cpp" line="-288"/>
        <source>HICUM Level 2 v2.23 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+309"/>
        <source>HICUM L2 v2.23</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/photodiode.cpp" line="-25"/>
        <source>Photodiode verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>photodiode emission coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>series lead resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>diode dark current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+32"/>
        <source>responsivity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="components/phototransistor.cpp" line="+33"/>
        <source>A/W</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>shunt resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>quantum efficiency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>light wavelength</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>nm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>responsivity calculator selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Photodiode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/rectline.cpp" line="-15"/>
        <source>material parameter for temperature model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/EKV26MOS.cpp" line="-142"/>
        <source>EPFL-EKV MOS 2.6 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/logical_buf.cpp" line="-4"/>
        <source>logical buffer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+104"/>
        <source>Buffer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL0V1p2.cpp" line="-254"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+6"/>
        <location filename="components/hicumL0V1p3.cpp" line="+8"/>
        <source>flag for turning on base related critical current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+10"/>
        <location filename="components/hicumL0V1p3.cpp" line="+10"/>
        <source>Smoothing factor for the d.c. injection width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+27"/>
        <location filename="components/hicumL0V1p3.cpp" line="+27"/>
        <source>BE charge built-in voltage for d.c. transfer current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+3"/>
        <location filename="components/hicumL0V1p3.cpp" line="+3"/>
        <source>charge BE exponent factor for d.c. transfer current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+162"/>
        <location filename="components/hicumL0V1p3.cpp" line="+162"/>
        <source>TC of iqf</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+175"/>
        <location filename="components/hicumL0V1p3.cpp" line="+8"/>
        <source>Exponent factor for temperature dependent thermal resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="+9"/>
        <location filename="components/hicumL0V1p2.cpp" line="-154"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-159"/>
        <location filename="components/hicumL0V1p3.cpp" line="-154"/>
        <source>Exponent factor for emitter transit time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="components/hicumL0V1p2.cpp" line="+5"/>
        <location filename="components/hicumL0V1p2g.cpp" line="+5"/>
        <location filename="components/hicumL0V1p3.cpp" line="+5"/>
        <source>Smoothing factor for current dependence</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/MESFET.cpp" line="-57"/>
        <source>Vto temperature coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL0V1p2.cpp" line="-19"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-19"/>
        <location filename="components/hicumL0V1p3.cpp" line="-19"/>
        <source>BE capacitance ratio (maximum to zero-bias value) for d.c. transfer current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hic0_full.cpp" line="-53"/>
        <location filename="components/hicumL0V1p2.cpp" line="-45"/>
        <location filename="components/hicumL0V1p2g.cpp" line="-45"/>
        <location filename="components/hicumL0V1p3.cpp" line="-45"/>
        <source>forward d.c. high-injection roll-off current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/andor4x2.cpp" line="-1"/>
        <location filename="components/andor4x3.cpp" line="-1"/>
        <location filename="components/andor4x4.cpp" line="-1"/>
        <location filename="components/binarytogrey4bit.cpp" line="-1"/>
        <location filename="components/comp_1bit.cpp" line="-1"/>
        <location filename="components/comp_2bit.cpp" line="-1"/>
        <location filename="components/comp_4bit.cpp" line="-1"/>
        <location filename="components/dmux2to4.cpp" line="-1"/>
        <location filename="components/dmux3to8.cpp" line="-1"/>
        <location filename="components/dmux4to16.cpp" line="-1"/>
        <location filename="components/fa1b.cpp" line="-1"/>
        <location filename="components/fa2b.cpp" line="-1"/>
        <location filename="components/greytobinary4bit.cpp" line="-1"/>
        <location filename="components/ha1b.cpp" line="-1"/>
        <location filename="components/hpribin4bit.cpp" line="-1"/>
        <location filename="components/mux2to1.cpp" line="-1"/>
        <location filename="components/mux4to1.cpp" line="-1"/>
        <location filename="components/mux8to1.cpp" line="-1"/>
        <source>output delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/dff_SR.cpp" line="-1"/>
        <location filename="components/gatedDlatch.cpp" line="-1"/>
        <location filename="components/jkff_SR.cpp" line="-1"/>
        <location filename="components/tff_SR.cpp" line="-1"/>
        <source>cross coupled gate delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/DLS_1ton.cpp" line="-3"/>
        <location filename="components/DLS_nto1.cpp" line="-1"/>
        <source>voltage level</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/DLS_nto1.cpp" line="+3"/>
        <source>time delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/logic_0.cpp" line="-1"/>
        <source>logic 0 voltage level</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/logic_1.cpp" line="-1"/>
        <source>logic 1 voltage level</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/pad2bit.cpp" line="+22"/>
        <location filename="components/pad3bit.cpp" line="+22"/>
        <location filename="components/pad4bit.cpp" line="+22"/>
        <source>pad output value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/andor4x2.cpp" line="-5"/>
        <source>4x2 andor verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4x2 AndOr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/andor4x3.cpp" line="-5"/>
        <source>4x3 andor verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4x3 AndOr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/andor4x4.cpp" line="-5"/>
        <source>4x4 andor verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4x4 AndOr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/binarytogrey4bit.cpp" line="-5"/>
        <source>4bit binary to grey converter verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4Bit Bin2Grey</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/comp_1bit.cpp" line="-5"/>
        <source>1bit comparator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>1Bit Comparator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/comp_2bit.cpp" line="-5"/>
        <source>2bit comparator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>2Bit Comparator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/comp_4bit.cpp" line="-5"/>
        <source>4bit comparator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4Bit Comparator</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/dff_SR.cpp" line="-7"/>
        <source>D flip flop with set and reset verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>D-FlipFlop w/ SR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/DLS_1ton.cpp" line="-5"/>
        <source>data voltage level shifter (digital to analogue) verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>D2A Level Shifter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/DLS_nto1.cpp" line="-6"/>
        <source>data voltage level shifter (analogue to digital) verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>A2D Level Shifter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/dmux2to4.cpp" line="-5"/>
        <source>2to4 demultiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>2to4 Demux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/dmux3to8.cpp" line="-5"/>
        <source>3to8 demultiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>3to8 Demux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/dmux4to16.cpp" line="-5"/>
        <source>4to16 demultiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4to16 Demux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/fa1b.cpp" line="-5"/>
        <source>1bit full adder verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>1Bit FullAdder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/fa2b.cpp" line="-5"/>
        <source>2bit full adder verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>2Bit FullAdder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/gatedDlatch.cpp" line="-7"/>
        <source>gated D latch verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Gated D-Latch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/greytobinary4bit.cpp" line="-5"/>
        <source>4bit grey to binary converter verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4Bit Grey2Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/ha1b.cpp" line="-5"/>
        <source>1bit half adder verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>1Bit HalfAdder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hpribin4bit.cpp" line="-5"/>
        <source>4bit highest priority encoder (binary form) verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4Bit HPRI-Bin</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/jkff_SR.cpp" line="-7"/>
        <source>jk flip flop with set and reset verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>JK-FlipFlop w/ SR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/logic_0.cpp" line="-3"/>
        <source>logic 0 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Logic 0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/logic_1.cpp" line="-3"/>
        <source>logic 1 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Logic 1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/mux2to1.cpp" line="-5"/>
        <source>2to1 multiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>2to1 Mux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/mux4to1.cpp" line="-5"/>
        <source>4to1 multiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>4to1 Mux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/mux8to1.cpp" line="-5"/>
        <source>8to1 multiplexer verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+25"/>
        <source>8to1 Mux</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/pad2bit.cpp" line="-3"/>
        <source>2bit pattern generator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>2Bit Pattern</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/pad3bit.cpp" line="-3"/>
        <source>3bit pattern generator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>3Bit Pattern</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/pad4bit.cpp" line="-3"/>
        <source>4bit pattern generator verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>4Bit Pattern</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/tff_SR.cpp" line="-7"/>
        <source>T flip flop with set and reset verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+27"/>
        <source>T-FlipFlop w/ SR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/andor4x2.cpp" line="-22"/>
        <location filename="components/andor4x3.cpp" line="-22"/>
        <location filename="components/andor4x4.cpp" line="-22"/>
        <location filename="components/comp_1bit.cpp" line="-22"/>
        <location filename="components/comp_2bit.cpp" line="-22"/>
        <location filename="components/comp_4bit.cpp" line="-22"/>
        <location filename="components/dmux2to4.cpp" line="-22"/>
        <location filename="components/dmux3to8.cpp" line="-22"/>
        <location filename="components/dmux4to16.cpp" line="-22"/>
        <location filename="components/fa1b.cpp" line="-22"/>
        <location filename="components/fa2b.cpp" line="-22"/>
        <location filename="components/ha1b.cpp" line="-22"/>
        <location filename="components/mux2to1.cpp" line="-22"/>
        <location filename="components/mux4to1.cpp" line="-22"/>
        <location filename="components/mux8to1.cpp" line="-22"/>
        <source>transfer function high scaling factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/binarytogrey4bit.cpp" line="-22"/>
        <location filename="components/component.cpp" line="-255"/>
        <location filename="components/greytobinary4bit.cpp" line="-22"/>
        <location filename="components/hpribin4bit.cpp" line="-22"/>
        <location filename="components/logical_buf.cpp" line="-96"/>
        <location filename="components/logical_inv.cpp" line="-113"/>
        <source>transfer function scaling factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/dff_SR.cpp" line="-24"/>
        <location filename="components/gatedDlatch.cpp" line="-24"/>
        <location filename="components/jkff_SR.cpp" line="-24"/>
        <location filename="components/tff_SR.cpp" line="-24"/>
        <source>cross coupled gate transfer function high scaling factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location filename="components/gatedDlatch.cpp" line="+2"/>
        <location filename="components/jkff_SR.cpp" line="+2"/>
        <location filename="components/tff_SR.cpp" line="+2"/>
        <source>cross coupled gate transfer function low scaling factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/msrstub.cpp" line="-26"/>
        <source>microstrip radial stub</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+22"/>
        <source>inner radius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>outer radius</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>stub angle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Microstrip Radial Stub</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/phototransistor.cpp" line="-64"/>
        <source>Phototransistor verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>dark current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+41"/>
        <source>collector series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>emitter series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>base series resistance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>responsivity at relative selectivity=100%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>relative selectivity polynomial coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Phototransistor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/rlcg.cpp" line="-36"/>
        <source>RLCG transmission line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>RLCG</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>resistive load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Ohm/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>inductive load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>H/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>capacitive load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>conductive load</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>S/m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>RLCG Transmission Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/vhdlfile.cpp" line="-46"/>
        <location line="+7"/>
        <source>generic variable</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="+411"/>
        <source>WARNING: Equations in &quot;%1&quot; are &apos;time&apos; typed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/nigbt.cpp" line="-10"/>
        <source>NIGBT verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>gate-drain overlap area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <source>m**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>area of the device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>MOS transconductance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>ambipolar recombination lifetime</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>metallurgical base width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>gate-source capacitance per unit area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <source>F/cm**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>gate-drain oxide capacitance per unit area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>A/cm**2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>triode region factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>electron mobility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+3"/>
        <source>cm**2/Vs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1"/>
        <source>hole mobility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>base doping</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>1/cm**3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>transverse field factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+32"/>
        <source>NIGBT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-56"/>
        <source>avalanche uniformity factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>avalanche multiplication exponent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>emitter saturation current density</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <source>gate-drain overlap depletion threshold</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="-1438"/>
        <source>Cannot save C++ file &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="module.cpp" line="+117"/>
        <location filename="qucs.cpp" line="+655"/>
        <location line="+106"/>
        <location filename="qucs_actions.cpp" line="+153"/>
        <source>verilog-a user devices</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+65"/>
        <location line="+2"/>
        <source>lumped components</source>
        <translation type="unfinished">diskrétní komponenty</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>sources</source>
        <translation type="unfinished">zdroje</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>probes</source>
        <translation type="unfinished">sondy</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>transmission lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <location line="+2"/>
        <source>nonlinear components</source>
        <translation type="unfinished">nelineární komponenty</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <source>verilog-a devices</source>
        <translation type="unfinished">verilog-a zařízení</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>digital components</source>
        <translation type="unfinished">digitální komponenty</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <source>file components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>simulations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <location filename="qucs.cpp" line="+1708"/>
        <source>diagrams</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <location filename="qucs.cpp" line="-1858"/>
        <location line="+30"/>
        <location line="+3"/>
        <location line="+107"/>
        <location line="+1"/>
        <source>paintings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>external sim components</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL2V2p24.cpp" line="-288"/>
        <source>HICUM Level 2 v2.24 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+309"/>
        <source>HICUM L2 v2.24</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL0V1p2g.cpp" line="+11"/>
        <source>high-injection roll-off current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+194"/>
        <source>TC of iqf (bandgap coefficient of zero bias hole charge)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Emitter part coefficient of the zero bias hole charge temperature variation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Collector part coefficient of the zero bias hole charge temperature variation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Specific recombination current at the BC barrier for high forward injection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-255"/>
        <source>HICUM Level 0 v1.2g verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+225"/>
        <source>TC of avalanche prefactor, identical to alfav of Hicum/L2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>TC of avalanche exponential factor, identical to alqav of Hicum/L2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Bandgap TC parameter of ver</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Bandgap TC parameter of vef</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+24"/>
        <source>npn HICUM L0 v1.2g</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>pnp HICUM L0 v1.2g</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hybrid.cpp" line="-37"/>
        <source>hybrid (unsymmetrical 3dB coupler)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+50"/>
        <source>Hybrid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/ctline.cpp" line="-50"/>
        <source>coupled transmission lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+36"/>
        <source>characteristic impedance of even mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>characteristic impedance of odd mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>relative dielectric constant of even mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>relative dielectric constant of odd mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>attenuation factor per length of even mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>attenuation factor per length of odd mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Coupled Transmission Line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/tunneldiode.cpp" line="-35"/>
        <source>resonance tunnel diode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>peak current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>valley current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>valley voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resonance energy in Ws</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Fermi energy in Ws</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>resonance width in Ws</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>maximum of transmission</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fitting factor for electron density</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fitting factor for voltage drop</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fitting factor for diode current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>zero-bias depletion capacitance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>life-time of electrons</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+35"/>
        <source>Tunnel Diode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL0V1p3.cpp" line="-22"/>
        <source>HICUM Level 0 v1.3 verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Flag for using third order solution for transfer current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>bias dependence for reverse Early voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+217"/>
        <source>Flag for turning temperature dependence of tef0 on and off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>TC of Reverse Early voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>TC of AVER</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Bandgap difference between base and BE-junction</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Frist-order TC of iqfh</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Second-order TC of iqfh</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+36"/>
        <source>npn HICUM L0 v1.3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>pnp HICUM L0 v1.3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/mslange.cpp" line="-36"/>
        <source>microstrip lange coupler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+53"/>
        <source>Microstrip Lange Coupler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/bsim3v34pMOS.cpp" line="-817"/>
        <source>bsim3v34pMOS verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+836"/>
        <source>bsim3v34pMOS</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/bsim4v30nMOS.cpp" line="-558"/>
        <source>bsim4v30nMOS verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+577"/>
        <source>bsim4v30nMOS</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/bsim4v30pMOS.cpp" line="-557"/>
        <source>bsim4v30pMOS verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+576"/>
        <source>bsim4v30pMOS</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/hicumL2V2p31n.cpp" line="-322"/>
        <source>hicumL2V2p31n verilog device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Weight factor for the low current minority charge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Parameter describing the slope of hjEi(VBE)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Smoothing parameter for hjEi(VBE) at high voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+160"/>
        <source>Time constant for modeling carrier jam at low VCE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+30"/>
        <source>Barrier voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Normalization parameter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Smoothing parameter for barrier voltage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>fitting factor for critical current</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Flag for turning on and off of correlated noise implementation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Emitter resistance flicker noise coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Emitter resistance flicker noise exponent factor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+52"/>
        <source>Bandgap difference between B and B-E junction used for hjEi0 and hf0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Temperature coefficient for ahjEi</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Temperature coefficient for hjEi0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Temperature coefficient for Rth</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>First order relative TC of parameter Rth</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>HICUM L2 V2.31</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="components/vacomponent.cpp" line="+1"/>
        <source>Symbol file not found: %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QucsActions</name>
    <message>
        <source>Coplanar Step</source>
        <translation type="obsolete">koplanární mezera</translation>
    </message>
    <message>
        <source>ERROR: Cannot load subcircuit &quot;</source>
        <translation type="obsolete">CHYBA: Nelze otevřít podobvod &quot;</translation>
    </message>
    <message>
        <source>ERROR: No file name in SPICE component &quot;</source>
        <translation type="obsolete">CHYBA: Není zadáno jméno souboru ve SPICE komponentě &quot;</translation>
    </message>
    <message>
        <source>reverse breakdown voltage</source>
        <translation type="obsolete">závěrné průrazné napětí</translation>
    </message>
    <message>
        <source>current at reverse breakdown voltage</source>
        <translation type="obsolete">Proud při závěrném průrazném napětí</translation>
    </message>
    <message>
        <source>ERROR: Cannot load subcircuit &quot;%1&quot;.</source>
        <translation type="obsolete">CHYBA: Podobvod &quot;%1&quot; nelze otevřít.</translation>
    </message>
    <message>
        <source>ERROR: No file name in SPICE component &quot;%1&quot;.</source>
        <translation type="obsolete">CHYBA: Ve SPICE komponentě &quot;%1&quot; není zadáno jméno souboru.</translation>
    </message>
    <message>
        <source>Component taken from Qucs library</source>
        <translation type="obsolete">Komponenta z Qucs knihovny</translation>
    </message>
    <message>
        <source>name of qucs library file</source>
        <translation type="obsolete">jméno souboru Qucs kniovny</translation>
    </message>
    <message>
        <source>name of component in library</source>
        <translation type="obsolete">jméno komponenty v knihovně</translation>
    </message>
    <message>
        <source>ERROR: Cannot load library component &quot;%1&quot;.</source>
        <translation type="obsolete">CHYBA: komponentu z knihovny &quot;%1&quot; nelze otevřít.</translation>
    </message>
    <message>
        <source>Locus Curve</source>
        <translation type="obsolete">Amplitudově fázová charakteristika</translation>
    </message>
    <message>
        <source>Polar</source>
        <translation type="obsolete">Polární</translation>
    </message>
    <message>
        <source>Polar-Smith Combi</source>
        <translation type="obsolete">Kombinovaný polární Smithův</translation>
    </message>
    <message>
        <source>Smith-Polar Combi</source>
        <translation type="obsolete">Kombinovaný Smithův polární</translation>
    </message>
    <message>
        <source>3D-Cartesian</source>
        <translation type="obsolete">3D-kartézký</translation>
    </message>
    <message>
        <source>Cartesian</source>
        <translation type="obsolete">Kartézký</translation>
    </message>
    <message>
        <source>Smith Chart</source>
        <translation type="obsolete">Smithův diagramm</translation>
    </message>
    <message>
        <source>Admittance Smith</source>
        <translation type="obsolete">Smithův diagramm (admitanční)</translation>
    </message>
    <message>
        <source>Tabular</source>
        <translation type="obsolete">Tabulka</translation>
    </message>
    <message>
        <source>Arrow</source>
        <translation type="obsolete">Šipka</translation>
    </message>
    <message>
        <source>Elliptic Arc</source>
        <translation type="obsolete">Eliptický oblouk</translation>
    </message>
    <message>
        <source>Ellipse</source>
        <translation type="obsolete">Elipsa</translation>
    </message>
    <message>
        <source>filled Ellipse</source>
        <translation type="obsolete">vyplněná elipsa</translation>
    </message>
    <message>
        <source>Line</source>
        <translation type="obsolete">Čára</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">Text</translation>
    </message>
    <message>
        <source>Rectangle</source>
        <translation type="obsolete">Obdélník</translation>
    </message>
    <message>
        <source>filled Rectangle</source>
        <translation type="obsolete">vyplněný obdélník</translation>
    </message>
    <message>
        <source>wrong dependency</source>
        <translation type="obsolete">chybná závislost</translation>
    </message>
    <message>
        <source>three mutual inductors</source>
        <translation type="obsolete">tři svázané induktivity</translation>
    </message>
    <message>
        <source>inductance of coil 1</source>
        <translation type="obsolete">induktivita 1. cívky</translation>
    </message>
    <message>
        <source>inductance of coil 2</source>
        <translation type="obsolete">induktivita 2. cívky</translation>
    </message>
    <message>
        <source>inductance of coil 3</source>
        <translation type="obsolete">induktivita 3. cívky</translation>
    </message>
    <message>
        <source>coupling factor between coil 1 and 2</source>
        <translation type="obsolete">vazební faktor mezi 1. a 2. cívkou</translation>
    </message>
    <message>
        <source>coupling factor between coil 1 and 3</source>
        <translation type="obsolete">vazební faktor mezi 1. a 3. cívkou</translation>
    </message>
    <message>
        <source>coupling factor between coil 2 and 3</source>
        <translation type="obsolete">vazební faktor mezi 2. a 3. cívkou</translation>
    </message>
    <message>
        <source>two mutual inductors</source>
        <translation type="obsolete">dvě svázané induktivity</translation>
    </message>
    <message>
        <source>resistance of coil 1</source>
        <translation type="obsolete">odpor 1. cívky</translation>
    </message>
    <message>
        <source>resistance of coil 2</source>
        <translation type="obsolete">odpor 2. cívky</translation>
    </message>
    <message>
        <source>Mutual Inductors</source>
        <translation type="obsolete">Svázané induktivity</translation>
    </message>
    <message>
        <source>3 Mutual Inductors</source>
        <translation type="obsolete">3 svázané induktivity</translation>
    </message>
    <message>
        <source>correlated current sources</source>
        <translation type="obsolete">korelované zdroje proudu</translation>
    </message>
    <message>
        <source>current power spectral density of source 1</source>
        <translation type="obsolete">proudová spektrální výkonová hustota 1. zdroje</translation>
    </message>
    <message>
        <source>current power spectral density of source 2</source>
        <translation type="obsolete">proudová spektrální výkonová hustota 2. zdroje</translation>
    </message>
    <message>
        <source>normalized correlation coefficient</source>
        <translation type="obsolete">normovaný korelační koeficient</translation>
    </message>
    <message>
        <source>Correlated Noise Sources</source>
        <translation type="obsolete">korelované zdroje rušení</translation>
    </message>
    <message>
        <source>voltage power spectral density of source 2</source>
        <translation type="obsolete">proudová spektrální výkonová hustota 2. zdroje</translation>
    </message>
    <message>
        <source>voltage power spectral density of source 1</source>
        <translation type="obsolete">proudová spektrální výkonová hustota 1. zdroje</translation>
    </message>
    <message>
        <source>Inserting clipboard contents...</source>
        <translation type="obsolete">Vložení obsahu schránky...</translation>
    </message>
    <message>
        <source>Ready.</source>
        <translation type="obsolete">Hotovo.</translation>
    </message>
    <message>
        <source>Info</source>
        <translation type="obsolete">Informace</translation>
    </message>
    <message>
        <source>At least two elements must be selected !</source>
        <translation type="obsolete">Pro tuto akci musí být vybrány minimálně dva elementy !</translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="obsolete">Chyba</translation>
    </message>
    <message>
        <source>Cannot start text editor!</source>
        <translation type="obsolete">Nelze spustit textový editor!</translation>
    </message>
    <message>
        <source>Cannot start filter synthesis program!</source>
        <translation type="obsolete">Nelze spustit program pro syntézu filtru!</translation>
    </message>
    <message>
        <source>Cannot start line calculation program!</source>
        <translation type="obsolete">Nelze spustit program pro výpočet vedení!</translation>
    </message>
    <message>
        <source>Cannot start qucshelp!</source>
        <translation type="obsolete">Nelze spustit program pro Qucs nápovědu!</translation>
    </message>
    <message>
        <source>Cannot start library program!</source>
        <translation type="obsolete">Nelze spustit program pro správu knihovny!</translation>
    </message>
    <message>
        <source>No project open!</source>
        <translation type="obsolete">Není otevřen žádný projekt!</translation>
    </message>
    <message>
        <source>Select files to copy</source>
        <translation type="obsolete">Vybrat soubory pro kopírování</translation>
    </message>
    <message>
        <source>No files copied.</source>
        <translation type="obsolete">Nebyly zkopírovány žádné soubory.</translation>
    </message>
    <message>
        <source>Cannot open &quot;%1&quot; !</source>
        <translation type="obsolete">Soubor &quot;%1&quot; nelze otevřít !</translation>
    </message>
    <message>
        <source>Overwrite</source>
        <translation type="obsolete">Přepsat</translation>
    </message>
    <message>
        <source>Cannot create &quot;%1&quot; !</source>
        <translation type="obsolete">Soubor &quot;%1&quot; nelze vytvořit !</translation>
    </message>
    <message>
        <source>Cannot read &quot;%1&quot; !</source>
        <translation type="obsolete">Soubor &quot;%1&quot; nelze přečíst !</translation>
    </message>
    <message>
        <source>Cannot write &quot;%1&quot; !</source>
        <translation type="obsolete">Soubor &quot;%1&quot; nelze uložit !</translation>
    </message>
    <message>
        <source>File &quot;%1&quot; already exists.
Overwrite ?</source>
        <translation type="obsolete">Soubor &quot;%1&quot; již existuje.
Přepsat ?</translation>
    </message>
</context>
<context>
    <name>QucsApp</name>
    <message>
        <location filename="qucs.cpp" line="-482"/>
        <source>New</source>
        <translation>Nový</translation>
    </message>
    <message>
        <location filename="qucs_init.cpp" line="+38"/>
        <source>&amp;New</source>
        <translation>&amp;Nový</translation>
    </message>
    <message>
        <source>Ctrl+N</source>
        <translation type="obsolete">Ctrl+N</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Creates a new document</source>
        <translation>Vytvoří nový dokument</translation>
    </message>
    <message>
        <source>Open File</source>
        <translation type="obsolete">Otevřít soubor</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>&amp;Open...</source>
        <translation>O&amp;tevřít...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Opens an existing document</source>
        <translation>Otevře existující dokument</translation>
    </message>
    <message>
        <location line="-11"/>
        <source>New

Creates a new schematic or data display document</source>
        <translation>Nový

Vytvoří nové schéma nebo datovou vizualizaci</translation>
    </message>
    <message>
        <source>Ctrl+O</source>
        <translation type="obsolete">Ctrl+O</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Open File

Opens an existing document</source>
        <translation>Otevřít soubor

Otevře již existující dokument</translation>
    </message>
    <message>
        <source>Save File</source>
        <translation type="obsolete">Uložit soubor</translation>
    </message>
    <message>
        <location filename="qucs.cpp" line="+617"/>
        <location line="+941"/>
        <location filename="qucs_init.cpp" line="+3"/>
        <source>&amp;Save</source>
        <translation>&amp;Uložit</translation>
    </message>
    <message>
        <source>Ctrl+S</source>
        <translation type="obsolete">Ctrl+S</translation>
    </message>
    <message>
        <location filename="qucs_init.cpp" line="+2"/>
        <source>Saves the current document</source>
        <translation>Uloží aktuální dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Save File

Saves the current document</source>
        <translation>Uložit soubor

Uloží aktuální dokument</translation>
    </message>
    <message>
        <source>Save File As</source>
        <translation type="obsolete">Uložit soubor jako</translation>
    </message>
    <message>
        <source>Save &amp;as...</source>
        <translation type="obsolete">Uložit &amp;jako</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Saves the current document under a new filename</source>
        <translation>Uloží aktuální dokument pod novým jménem souboru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Save As

Saves the current document under a new filename</source>
        <translation>Uložit jako

Uloží aktuální dokument pod novým jménem souboru</translation>
    </message>
    <message>
        <source>Save All Files</source>
        <translation type="obsolete">Uložit všechny soubory</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Save &amp;All</source>
        <translation>&amp;Uložit vše</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Saves all open documents</source>
        <translation>Uloží všechny otevřené dokumenty</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Save All Files

Saves all open documents</source>
        <translation>Uložit všechny soubory

Uloží všechny dokumenty</translation>
    </message>
    <message>
        <source>Close File</source>
        <translation type="obsolete">Uzavřít soubor</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Close</source>
        <translation>Uza&amp;vřít</translation>
    </message>
    <message>
        <source>Ctrl+W</source>
        <translation type="obsolete">Ctrl+W</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Closes the current document</source>
        <translation>Uzavře aktuální dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Close File

Closes the current document</source>
        <translation>Uzavřít soubor

Uzavře aktuální dokument</translation>
    </message>
    <message>
        <source>Settings</source>
        <translation type="obsolete">Nastavení</translation>
    </message>
    <message>
        <source>Settings...</source>
        <translation type="obsolete">Nastavení...</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Settings

Sets properties of the file</source>
        <translation>Nastavení

Nastaví parametry souboru</translation>
    </message>
    <message>
        <source>Print File</source>
        <translation type="obsolete">Vytisknout soubor</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Print...</source>
        <translation>&amp;Vytisknout...</translation>
    </message>
    <message>
        <source>Ctrl+P</source>
        <translation type="obsolete">Ctrl+P</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Prints the current document</source>
        <translation>Vytiskne aktuální dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Print File

Prints the current document</source>
        <translation>Vytisknout soubor

Vytiskne aktuální dokument</translation>
    </message>
    <message>
        <source>Exit</source>
        <translation type="obsolete">Ukončit</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>E&amp;xit</source>
        <translation>&amp;Ukončit</translation>
    </message>
    <message>
        <source>Ctrl+Q</source>
        <translation type="obsolete">Ctrl+Q</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Quits the application</source>
        <translation>Ukončí aplikaci</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Exit

Quits the application</source>
        <translation>Ukončit

Ukončí aplikaci</translation>
    </message>
    <message>
        <source>Cut</source>
        <translation type="obsolete">Vyříznout</translation>
    </message>
    <message>
        <location line="+91"/>
        <source>Cu&amp;t</source>
        <translation>&amp;Vyříznout</translation>
    </message>
    <message>
        <source>Ctrl+X</source>
        <translation type="obsolete">Ctrl+X</translation>
    </message>
    <message>
        <source>Cuts the selected section and puts it to the clipboard</source>
        <translation type="obsolete">Vyřízne vybranou oblast a zkopíruje ji do schránky</translation>
    </message>
    <message>
        <source>Cut

Cuts the selected section and puts it to the clipboard</source>
        <translation type="obsolete">Vyříznout

Vyřízne vybranou oblast a zkopíruje ji do schránky</translation>
    </message>
    <message>
        <source>Copy</source>
        <translation type="obsolete">Zkopírovat</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>&amp;Copy</source>
        <translation>&amp;Zkopírovat</translation>
    </message>
    <message>
        <source>Ctrl+C</source>
        <translation type="obsolete">Ctrl+C</translation>
    </message>
    <message>
        <source>Copies the selected section to the clipboard</source>
        <translation type="obsolete">Zkopíruje vybranou oblast do schránky</translation>
    </message>
    <message>
        <source>Copy

Copies the selected section to the clipboard</source>
        <translation type="obsolete">Zkopírovat

Zkopíruje vybranou oblast do schránky</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation type="obsolete">Vložit</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>&amp;Paste</source>
        <translation>&amp;Vložit</translation>
    </message>
    <message>
        <source>Ctrl+V</source>
        <translation type="obsolete">Ctrl+V</translation>
    </message>
    <message>
        <source>digital components</source>
        <translation type="obsolete">digitální komponenty</translation>
    </message>
    <message>
        <location filename="qucs.cpp" line="-1726"/>
        <source>Schematic</source>
        <translation>Schéma</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Data Display</source>
        <translation>Datová vizualizace</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Qucs Documents</source>
        <translation>Qucs dokumenty</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+1554"/>
        <location filename="qucs_actions.cpp" line="-172"/>
        <source>Any File</source>
        <translation>Všechny soubory</translation>
    </message>
    <message>
        <location line="-1392"/>
        <location line="+525"/>
        <source>Open</source>
        <translation>Otevřít</translation>
    </message>
    <message>
        <location line="-523"/>
        <location line="+535"/>
        <source>Delete</source>
        <translation>Smazat</translation>
    </message>
    <message>
        <location line="-519"/>
        <source>Projects</source>
        <translation>Projekty</translation>
    </message>
    <message>
        <source>content of the project directory</source>
        <translation type="obsolete">Obsah adresáře projektu</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+1087"/>
        <source>Content of</source>
        <translation>Obsah</translation>
    </message>
    <message>
        <location line="-1087"/>
        <location line="+1022"/>
        <location line="+65"/>
        <source>Note</source>
        <translation>Poznámka</translation>
    </message>
    <message>
        <location line="-1186"/>
        <source>Datasets</source>
        <translation>Datové sady</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Data Displays</source>
        <translation>Datové vizualizace</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+2373"/>
        <source>Schematics</source>
        <translation>Schémata</translation>
    </message>
    <message>
        <location line="-2276"/>
        <source>Content</source>
        <translation>Obsah</translation>
    </message>
    <message>
        <source>content of the open project</source>
        <translation type="obsolete">Obsah otevřeného projektu</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Components</source>
        <translation>Komponenty</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>components and diagrams</source>
        <translation>komponenty a diagramy</translation>
    </message>
    <message>
        <source>lumped components</source>
        <translation type="obsolete">diskrétní komponenty</translation>
    </message>
    <message>
        <source>sources</source>
        <translation type="obsolete">zdroje</translation>
    </message>
    <message>
        <source>transmission lines</source>
        <translation type="obsolete">přenosová vedení</translation>
    </message>
    <message>
        <source>nonlinear components</source>
        <translation type="obsolete">nelineární komponenty</translation>
    </message>
    <message>
        <source>file components</source>
        <translation type="obsolete">datové komponenty</translation>
    </message>
    <message>
        <source>simulations</source>
        <translation type="obsolete">simulace</translation>
    </message>
    <message>
        <source>diagrams</source>
        <translation type="obsolete">diagramy</translation>
    </message>
    <message>
        <source>paintings</source>
        <translation type="obsolete">grafika</translation>
    </message>
    <message>
        <location line="+470"/>
        <source>Rename</source>
        <translation>Přejmenovat</translation>
    </message>
    <message>
        <source>Delete Group</source>
        <translation type="obsolete">Smazat skupinu</translation>
    </message>
    <message>
        <location line="-365"/>
        <location line="+3"/>
        <location line="+62"/>
        <location line="+3"/>
        <location line="+417"/>
        <location line="+21"/>
        <location line="+22"/>
        <location line="+14"/>
        <location line="+12"/>
        <location line="+54"/>
        <location line="+31"/>
        <location line="+235"/>
        <location line="+1139"/>
        <location line="+28"/>
        <location line="+77"/>
        <location line="+316"/>
        <location line="+7"/>
        <location line="+7"/>
        <location line="+7"/>
        <location line="+6"/>
        <location filename="qucs_actions.cpp" line="-681"/>
        <location line="+55"/>
        <location line="+31"/>
        <location line="+33"/>
        <location line="+40"/>
        <location line="+31"/>
        <location line="+44"/>
        <location line="+46"/>
        <location line="+32"/>
        <location line="+16"/>
        <location line="+10"/>
        <location line="+5"/>
        <location line="+295"/>
        <location line="+14"/>
        <location line="+19"/>
        <location line="+144"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="-1954"/>
        <source>Cannot rename an open file!</source>
        <translation>Otevřený soubor nelze přejmenovat!</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Rename file</source>
        <translation>Přejmenovat soubor</translation>
    </message>
    <message>
        <location line="-49"/>
        <location line="+49"/>
        <source>Enter new name:</source>
        <translation>Zadat nové jméno:</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Cannot rename file: </source>
        <translation>Nemůže být přejmenován soubor: </translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Cannot delete an open file!</source>
        <translation>Otevřený soubor nemůže být smazán!</translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+77"/>
        <location line="+47"/>
        <location line="+329"/>
        <location line="+246"/>
        <location line="+630"/>
        <source>Warning</source>
        <translation>Upozornění</translation>
    </message>
    <message>
        <location line="-1328"/>
        <source>This will delete the file permanently! Continue ?</source>
        <translation>Soubor bude nenávratně smazán! Pokračovat ?</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+77"/>
        <location line="+623"/>
        <location line="+454"/>
        <source>No</source>
        <translation>Ne</translation>
    </message>
    <message>
        <location line="-1154"/>
        <location line="+77"/>
        <location line="+623"/>
        <location line="+454"/>
        <source>Yes</source>
        <translation>Ano</translation>
    </message>
    <message>
        <location line="-1149"/>
        <source>Cannot delete schematic: </source>
        <translation>Nelze smazat schéma: </translation>
    </message>
    <message>
        <source>Cannot delete the open file: </source>
        <translation type="obsolete">Nelze smazat otevřený soubor: </translation>
    </message>
    <message>
        <source>This will delete the files
</source>
        <translation type="obsolete">Soubory budou smazány
</translation>
    </message>
    <message>
        <source>permanently! Continue ?</source>
        <translation type="obsolete">nenávratně! Pokračovat?</translation>
    </message>
    <message>
        <location line="+118"/>
        <source>Cannot create work directory !</source>
        <translation>Pracovní adresář nelze vytvořit !</translation>
    </message>
    <message>
        <location line="+712"/>
        <source>Closing Qucs document</source>
        <translation>Uzavřít Qucs dokument</translation>
    </message>
    <message>
        <source>This document contains unsaved changes!
Do you want to save the changes before closing?</source>
        <translation type="obsolete">tento dokument obsahuje neuložené změny!
Chcete změny před uzavřením uložit?</translation>
    </message>
    <message>
        <location line="-319"/>
        <source>Creating new schematic...</source>
        <translation>Vytvořit nové schéma...</translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+10"/>
        <location line="+69"/>
        <location line="+30"/>
        <location line="+5"/>
        <location line="+127"/>
        <location line="+5"/>
        <location line="+34"/>
        <location line="+49"/>
        <location line="+35"/>
        <location line="+240"/>
        <location line="+37"/>
        <location line="+45"/>
        <location line="+22"/>
        <location filename="qucs_actions.cpp" line="-857"/>
        <location line="+397"/>
        <location filename="qucs_init.cpp" line="+715"/>
        <source>Ready.</source>
        <translation>Hotovo.</translation>
    </message>
    <message>
        <location line="-648"/>
        <location filename="qucs_actions.cpp" line="-406"/>
        <source>Opening file...</source>
        <translation>Otevřít soubor...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Enter a Schematic Name</source>
        <translation>Zadat jméno schématu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Opening aborted</source>
        <translation>Otevírání přerušeno</translation>
    </message>
    <message>
        <location line="-745"/>
        <location line="+429"/>
        <location line="+772"/>
        <source>-port</source>
        <translation>-port</translation>
    </message>
    <message>
        <location line="-1220"/>
        <source>Insert</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+800"/>
        <source>Saving file...</source>
        <translation>Uložit soubor...</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+132"/>
        <source>Saving aborted</source>
        <translation>Ukládání přerušeno</translation>
    </message>
    <message>
        <location line="-83"/>
        <source>Enter a Document Name</source>
        <translation>Vložit jméno dokumentu</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>The file &apos;</source>
        <translation>Soubor &apos;</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>&apos; already exists!
</source>
        <translation>&apos; již existuje!
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Saving will overwrite the old one! Continue?</source>
        <translation>Při uložení bude přepsán původní soubor! pokračovat?</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+138"/>
        <source>Cancel</source>
        <translation>Přerušit</translation>
    </message>
    <message>
        <source>Only the extensions &apos;.sch&apos; and &apos;.dpl&apos;
</source>
        <translation type="obsolete">Pouze přípony souborů &apos;.sch&apos; a &apos;.dpl&apos;
</translation>
    </message>
    <message>
        <source>will appear in the content browser! Continue?</source>
        <translation type="obsolete">se objeví ve výpisu adresáře! Dále?</translation>
    </message>
    <message>
        <location line="-1144"/>
        <location line="+465"/>
        <location line="+211"/>
        <location line="+44"/>
        <location line="+17"/>
        <location line="+14"/>
        <location line="+16"/>
        <location line="+37"/>
        <location line="+211"/>
        <location filename="qucs_actions.cpp" line="-149"/>
        <location line="+14"/>
        <location line="+14"/>
        <location line="+14"/>
        <location line="+38"/>
        <location line="+14"/>
        <location line="+799"/>
        <source>Info</source>
        <translation>Informace</translation>
    </message>
    <message>
        <location line="-377"/>
        <source>Content of </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+378"/>
        <source>Cannot overwrite an open document</source>
        <translation>Otevřený soubor nelze přepsat</translation>
    </message>
    <message>
        <location line="+45"/>
        <source>Saving file under new filename...</source>
        <translation>Uložit soubor pod novým jménem...</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Saving all files...</source>
        <translation>Uložit všechny soubory...</translation>
    </message>
    <message>
        <location line="+49"/>
        <source>Closing file...</source>
        <translation>Uzavřít soubor...</translation>
    </message>
    <message>
        <location line="-935"/>
        <location line="+941"/>
        <source>The document contains unsaved changes!
</source>
        <translation>Dokument obsahuje neuložené změny!
</translation>
    </message>
    <message>
        <location line="-1717"/>
        <source>Spice Files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+240"/>
        <source>Manage Libraries</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+13"/>
        <location line="+8"/>
        <source>Libraries</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>system and user component libraries</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+69"/>
        <location line="+65"/>
        <source>Cannot open &quot;%1&quot;.</source>
        <translation type="unfinished">Soubor &quot;%1&quot; nelze otevřít.</translation>
    </message>
    <message>
        <location line="-62"/>
        <location line="+65"/>
        <source>Library is corrupt.</source>
        <translation type="unfinished">Soubor s knihovnou je poškozen.</translation>
    </message>
    <message>
        <location line="+177"/>
        <source>Default icon not found:
 %1.png</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+116"/>
        <source>Duplicate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+83"/>
        <source>Copying Qucs document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Do you want to save the changes before copying?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;Ignore</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Copy file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Cannot copy file to identical name: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Cannot copy schematic: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+737"/>
        <source>Qucs Netlist</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Plain Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+164"/>
        <source>Do you want to save the changes before closing?</source>
        <translation>Chcete uložit změny před ukončením?</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;Discard</source>
        <translation>&amp;Zrušit</translation>
    </message>
    <message>
        <location line="+44"/>
        <source>Open examples directory...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+204"/>
        <source>Printing...</source>
        <translation>Tisk...</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Print Document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+54"/>
        <source>Exiting application...</source>
        <translation>Ukončení aplikace...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Quit...</source>
        <translation>Ukončit...</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Do you really want to quit?</source>
        <translation>Chcete program skutečně ukončit?</translation>
    </message>
    <message>
        <location line="+36"/>
        <source>Cutting selection...</source>
        <translation>Vyříznout výběr...</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Copying selection to clipboard...</source>
        <translation>Zkopírovat výběr do schránky...</translation>
    </message>
    <message>
        <location line="+250"/>
        <source>Cannot create </source>
        <translation>nelze vytvořit </translation>
    </message>
    <message>
        <location line="+28"/>
        <source>No page set !</source>
        <translation>Stránka není nastavena !</translation>
    </message>
    <message>
        <location line="+749"/>
        <location line="+13"/>
        <location line="+18"/>
        <location line="+6"/>
        <source>Export to image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-36"/>
        <source>Inkscape start error!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Unsupported format of graphics file. 
Use PNG, JPEG or SVG graphics!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Sucessfully exported!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Disk write error!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1953"/>
        <source>Cannot access project directory: </source>
        <translation>Adresář s projektem není přístupný: </translation>
    </message>
    <message>
        <location line="+16"/>
        <location line="+51"/>
        <source> - Project: </source>
        <translation> - Projekt: </translation>
    </message>
    <message>
        <location line="-44"/>
        <source>Choose Project Directory for Opening</source>
        <translation>Výbrat k otevření adresář s projektem</translation>
    </message>
    <message>
        <source>Content of &apos;</source>
        <translation type="obsolete">Obsah &apos;</translation>
    </message>
    <message>
        <source>&apos;</source>
        <translation type="obsolete">&apos;</translation>
    </message>
    <message>
        <location line="-188"/>
        <source>Cannot create project directory !</source>
        <translation>Adresář s projektem nelze vytvořit !</translation>
    </message>
    <message>
        <location line="+211"/>
        <location line="+128"/>
        <source>No project is selected !</source>
        <translation>Nejsou vybrány žádné projekty !</translation>
    </message>
    <message>
        <location line="-53"/>
        <source>Cannot delete an open project !</source>
        <translation>Otevřený projekt nelze smazat !</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>This will destroy all the project files permanently ! Continue ?</source>
        <translation>Tímto budou všechny soubory z projektu nenávratně smazány ! Pokračovat ?</translation>
    </message>
    <message>
        <location line="+1"/>
        <location filename="qucs_actions.cpp" line="+2"/>
        <source>&amp;Yes</source>
        <translation>&amp;Ano</translation>
    </message>
    <message>
        <location line="+0"/>
        <location filename="qucs_actions.cpp" line="+0"/>
        <source>&amp;No</source>
        <translation>&amp;Ne</translation>
    </message>
    <message>
        <source>Cannot remove project file: </source>
        <translation type="obsolete">Soubor s projektem nelze smazat: </translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Cannot remove project directory !</source>
        <translation>Adresář s projektem Projektverzeichnis kann nicht gelöscht werden !</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Choose Project Directory for Deleting</source>
        <translation>Vyberte adresář s projektem ke smazání</translation>
    </message>
    <message>
        <source>SPICE netlist</source>
        <translation type="obsolete">SPICE netlist</translation>
    </message>
    <message>
        <source>1-port S parameter file</source>
        <translation type="obsolete">1-portový S-parametr soubor</translation>
    </message>
    <message>
        <source>2-port S parameter file</source>
        <translation type="obsolete">2-portový S-parametr soubor</translation>
    </message>
    <message>
        <source>3-port S parameter file</source>
        <translation type="obsolete">3-portový S-parametr soubor</translation>
    </message>
    <message>
        <source>4-port S parameter file</source>
        <translation type="obsolete">4-portový S-parametr soubor</translation>
    </message>
    <message>
        <source>5-port S parameter file</source>
        <translation type="obsolete">5-portový S parametr soubor</translation>
    </message>
    <message>
        <source>6-port S parameter file</source>
        <translation type="obsolete">6-portový S parametr soubor</translation>
    </message>
    <message>
        <source>Edit Circuit Symbol</source>
        <translation type="obsolete">Upravit symbol komponenty</translation>
    </message>
    <message>
        <location filename="qucs_init.cpp" line="-850"/>
        <source>Edits the symbol for this schematic</source>
        <translation>Upravit symbol pro toto schéma</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Edit Circuit Symbol

Edits the symbol for this schematic</source>
        <translation>Upravit symbol komponenty

Upraví symbol v tomto schématu</translation>
    </message>
    <message>
        <source>Edit Schematic</source>
        <translation type="obsolete">Upravit schéma</translation>
    </message>
    <message>
        <source>Edits the schematic</source>
        <translation type="obsolete">Upraví schéma</translation>
    </message>
    <message>
        <source>Edit Schematic

Edits the schematic</source>
        <translation type="obsolete">Upravit schéma

Upraví schéma</translation>
    </message>
    <message>
        <location filename="qucs.cpp" line="-1265"/>
        <source>Others</source>
        <translation>Ostatní</translation>
    </message>
    <message>
        <location line="+2360"/>
        <source>Cannot start &quot;%1&quot;!</source>
        <translation>Program &quot;%1&quot; nelze spustit!</translation>
    </message>
    <message>
        <location line="-2454"/>
        <location line="+1553"/>
        <source>VHDL Sources</source>
        <translation>VHDL zdroje</translation>
    </message>
    <message>
        <location line="-1447"/>
        <location line="+2379"/>
        <source>VHDL</source>
        <translation>VHDL</translation>
    </message>
    <message>
        <location line="-2299"/>
        <source>content of project directory</source>
        <translation>Obsah adresáře s projektem</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>content of current project</source>
        <translation>obsah aktuálního projektu</translation>
    </message>
    <message>
        <source>Cannot delete data display: </source>
        <translation type="obsolete">Nelze smazat údaje z datové vizualizace: </translation>
    </message>
    <message>
        <source>Cannot delete data file: </source>
        <translation type="obsolete">Nelze smazat datovou sadu ze souboru: </translation>
    </message>
    <message>
        <source>Cannot delete VHDL source: </source>
        <translation type="obsolete">Zdrojový soubor VHDL nelze smazat: </translation>
    </message>
    <message>
        <location line="+1206"/>
        <source>Creating new text editor...</source>
        <translation>Vytvoření nového textového editoru...</translation>
    </message>
    <message>
        <source>Printing selected...</source>
        <translation type="obsolete">Tisk výběru...</translation>
    </message>
    <message>
        <location line="+1357"/>
        <source>Could not load S[1,1].</source>
        <translation>Datovou sadu S[1,1] nelze otevřít.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Could not load S[1,2].</source>
        <translation>Datovou sadu S[1,2] nelze otevřít.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Could not load S[2,1].</source>
        <translation>Datovou sadu S[2,1] nelze otevřít.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Could not load S[2,2].</source>
        <translation>Datovou sadu S[2,2] nelze otevřít.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Wrong dependency!</source>
        <translation>Chybná závislost!</translation>
    </message>
    <message>
        <location filename="qucs_actions.cpp" line="-894"/>
        <location line="+14"/>
        <location line="+14"/>
        <location line="+14"/>
        <location line="+38"/>
        <location line="+14"/>
        <source>At least two elements must be selected !</source>
        <translation>K tomuto úkonu musí být vybrány minimálně dva Elementy !</translation>
    </message>
    <message>
        <location line="+59"/>
        <source>Opening aborted, file not found.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cannot start text editor!</source>
        <translation type="obsolete">Textový editor nelze spustit!</translation>
    </message>
    <message>
        <source>Cannot start filter synthesis program!</source>
        <translation type="obsolete">Nelze spustit program pro syntézu filtru</translation>
    </message>
    <message>
        <source>Cannot start line calculation program!</source>
        <translation type="obsolete">Nelze spustit program pro výpočet vedení!</translation>
    </message>
    <message>
        <source>Cannot start library program!</source>
        <translation type="obsolete">Nelze spustit program pro práci s knihovnami!</translation>
    </message>
    <message>
        <source>Cannot start qucshelp!</source>
        <translation type="obsolete">Nelze spustit qucs nápovědu!</translation>
    </message>
    <message>
        <location line="+326"/>
        <source>No project open!</source>
        <translation>Není otevřen žádný projekt!</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Select files to copy</source>
        <translation>Vybrat soubory pro kopírování</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>No files copied.</source>
        <translation>Nebyly zkopírovány žádné soubory.</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Cannot open &quot;%1&quot; !</source>
        <translation>nelze otevřít soubor &quot;%1&quot; !</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Overwrite</source>
        <translation>Přepsat</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>File &quot;%1&quot; already exists.
Overwrite ?</source>
        <translation>Soubor &quot;%1&quot; již existuje.
Přepsat ?</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Cannot create &quot;%1&quot; !</source>
        <translation>Soubor &quot;%1&quot; nelze vytvořit !</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Cannot read &quot;%1&quot; !</source>
        <translation>Soubor &quot;%1&quot; nelze otevřít !</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Cannot write &quot;%1&quot; !</source>
        <translation>Soubor &quot;%1&quot; nelze uložit !</translation>
    </message>
    <message>
        <location line="+438"/>
        <source>Clear list</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+35"/>
        <source>Symbol files not found in: %1

Is the project open?
Have you saved the Verilog-A symbols?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>New Text</source>
        <translation type="obsolete">Nový textový dokument</translation>
    </message>
    <message>
        <location filename="qucs_init.cpp" line="-49"/>
        <source>New &amp;Text</source>
        <translation>Nový &amp;textový dokument</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Creates a new text document</source>
        <translation>Vytvoření nového textového dokumentu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>New Text

Creates a new text document</source>
        <translation>Nový textový dokument

Vytvoří nový textový dokument</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Save as...</source>
        <translation>Uložit jako...</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>&amp;Edit Circuit Symbol</source>
        <translation>&amp;Upravit symbol ve schématu</translation>
    </message>
    <message>
        <source>&amp;Document Settings</source>
        <translation type="obsolete">&amp;Nastavení dokumentu</translation>
    </message>
    <message>
        <source>Document Settings...</source>
        <translation type="obsolete">Nastavení dokumentu...</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Document Settings</source>
        <translation>Nastavení dokumentu</translation>
    </message>
    <message>
        <source>Print Selected Elements</source>
        <translation type="obsolete">Vytisknout vybrané objekty</translation>
    </message>
    <message>
        <source>Print Selection...</source>
        <translation type="obsolete">Tisk výběru...</translation>
    </message>
    <message>
        <source>Prints Selected Elements</source>
        <translation type="obsolete">Vytisknout vybrané objekty</translation>
    </message>
    <message>
        <source>Print Selected Elements

Prints selected elements of the current document</source>
        <translation type="obsolete">Výtisk výběru

Vytiskne vybrané objekty z aktuálního dokumentu</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Application Settings</source>
        <translation>Nastavení aplikace</translation>
    </message>
    <message>
        <location line="-2"/>
        <source>Application Settings...</source>
        <translation>Nastavení aplikace...</translation>
    </message>
    <message>
        <location line="-40"/>
        <source>&amp;Examples</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Opens a file explorer with example documents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Examples

Opens a file explorer with example documents</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+41"/>
        <source>Qucs Settings

Sets properties of the application</source>
        <translation>Nastavení Qucs

Nastavení vlastností programu Qucs</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Refresh Search Path...</source>
        <oldsource>Refresh Path...</oldsource>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Refresh Search Path</source>
        <oldsource>Refresh Path</oldsource>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Refresh Path

Rechecks the list of paths for subcircuit files.</source>
        <oldsource>Refresh Path

Rechecks the list of paths for files.</oldsource>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Align top</source>
        <translation>Zarovnat nahoru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Align top selected elements</source>
        <translation>Zarovnat vybrané objekty nahoru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Align top

Align selected elements to their upper edge</source>
        <translation>Zarovnat nahoru

Zarovná vybrané objekty na jejich horní hranu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Align bottom</source>
        <translation>Zarovnat naspod</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align bottom selected elements</source>
        <translation>Zarovnat vybrané objekty naspod</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Align bottom

Align selected elements to their lower edge</source>
        <translation>Zarovnat naspod

Zarovná vybrané objekty na jejich spodní hranu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Align left</source>
        <translation>Zarovnat doleva</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align left selected elements</source>
        <translation>Zarovnat vybrané objekty doleva</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Align left

Align selected elements to their left edge</source>
        <translation>Zarovnat doleva

Zarovná vybrané objekty na jejich levou hranu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Align right</source>
        <translation>Zarovnat doprava</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Align right selected elements</source>
        <translation>Zarovnat vybrané obekty doprava</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Align right

Align selected elements to their right edge</source>
        <translation>Zarovnat doprava

Zarovná vybrané objekty na jejich pravou hranu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Distribute horizontally</source>
        <translation>Rozložit vodorovně</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Distribute equally horizontally</source>
        <translation>Rozložit rovnoměrně vodorovně</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Distribute horizontally

Distribute horizontally selected elements</source>
        <translation>Rozložit vodorovně

Rozloží vybrané objekty ve vdorovném směru</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Distribute vertically</source>
        <translation>Rozložit svisle</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Distribute equally vertically</source>
        <translation>Rozložit rovnoměrně svisle</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Distribute vertically

Distribute vertically selected elements</source>
        <translation>Rozložit svisle

Rozloží vybrané objekty ve svislém směru</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Set on Grid</source>
        <translation>Nastavit na bodovou síť</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Set on Grid

Sets selected elements on grid</source>
        <translation>Nastavit na bodovou síť

Nastaví vybrané objekty na bodovou síť</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Move Component Text</source>
        <translation>Přesunout popis komponenty</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Move Component Text

Moves the property text of components</source>
        <translation>Přesunout text komponenty

Přesune popis vlastností komponenty</translation>
    </message>
    <message>
        <source>Change Property Values...</source>
        <translation type="obsolete">Změnit hodnoty parametrů...</translation>
    </message>
    <message>
        <source>Change Property Values</source>
        <translation type="obsolete">Změnit hodnoty parametů</translation>
    </message>
    <message>
        <source>Change Property Values

Change Property Value of Components</source>
        <translation type="obsolete">Změnit hodnoty parametrů

Změní parametry vybrané komponenty</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>Pastes the clipboard contents to the cursor position</source>
        <translation>Vloží obsah schránky na místo kurzoru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Paste

Pastes the clipboard contents to the cursor position</source>
        <translation>Vložit

Vloží obsah schránky na místo kurzoru</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;Delete</source>
        <translation>&amp;Smazat</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Deletes the selected components</source>
        <translation>Smaže vybrané komponenty</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Delete

Deletes the selected components</source>
        <translation>Smazat

Smaže vybrané komponenty</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation type="obsolete">Zpět</translation>
    </message>
    <message>
        <location line="+52"/>
        <source>&amp;Undo</source>
        <translation>&amp;Zpět</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Undoes the last command</source>
        <translation>Poslední úkon bude vrácen zpět</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Undo

Makes the last action undone</source>
        <translation>Zpět

Poslední úkon bude vrácen zpět</translation>
    </message>
    <message>
        <source>Redo</source>
        <translation type="obsolete">Zopakovat</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Redo</source>
        <translation>Z&amp;opakovat</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Redoes the last command</source>
        <translation>Zopakuje poslední příkaz</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Redo

Repeats the last action once more</source>
        <translation>Zopakovat

Zopakuje znovu poslední příkaz</translation>
    </message>
    <message>
        <source>New Project</source>
        <translation type="obsolete">Nový projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;New Project...</source>
        <translation>&amp;Nový projekt...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Creates a new project</source>
        <translation>Vytvoří nový projekt</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>New Project

Creates a new project</source>
        <translation>Nový projekt

Vytvoří nový projekt</translation>
    </message>
    <message>
        <source>Open Project</source>
        <translation type="obsolete">Otevřít projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Open Project...</source>
        <translation>&amp;Otevřít projekt...</translation>
    </message>
    <message>
        <source>Opens a project</source>
        <translation type="obsolete">Otevře projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Open Project

Opens an existing project</source>
        <translation>Otevřít projekt

Otevře existující projekt</translation>
    </message>
    <message>
        <source>Delete Project</source>
        <translation type="obsolete">Smazat projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Delete Project...</source>
        <translation>&amp;Smazat projekt...</translation>
    </message>
    <message>
        <source>Deletes a project</source>
        <translation type="obsolete">Smaže projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Delete Project

Deletes an existing project</source>
        <translation>Smazat projekt

Smaže existující projekt</translation>
    </message>
    <message>
        <source>Close Project</source>
        <translation type="obsolete">Zavřít projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Close Project</source>
        <translation>&amp;Zavřít projekt</translation>
    </message>
    <message>
        <source>Close current project</source>
        <translation type="obsolete">Zavře aktuální projekt</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Close Project

Closes the current project</source>
        <translation>Zavřít projekt

Uzavře aktální projekt</translation>
    </message>
    <message>
        <source>Add Files to Project</source>
        <translation type="obsolete">Připojit soubory k projektu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Add Files to Project...</source>
        <translation>&amp;Připojit soubory k projektu...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Copies files to project directory</source>
        <translation>Zkopíruje soubory do adresáře s projektem</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Add Files to Project

Copies files to project directory</source>
        <translation>Přidat soubory k projektu

Zkopíruje soubory do adresáře s projektem</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>View All</source>
        <translation>Zobrazit vše</translation>
    </message>
    <message>
        <source>Views the whole page</source>
        <translation type="obsolete">Zobrazí celou stránku</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>View All

Shows the whole page content</source>
        <translation>Zobrazit vše

Zobrazí obsah celé stránky</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>View 1:1</source>
        <translation>Zobrazit 1:1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Views without magnification</source>
        <translation>Zobrazení bez zvětšení</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>View 1:1

Shows the page content without magnification</source>
        <translation>Zobrazení 1:1

Zobrazí obsah stránky v originální velikosti</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Zoom in</source>
        <translation>Zvětšit</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Zooms into the current view</source>
        <translation>Zvětší na aktuální náhled</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Zoom in

Zooms the current view</source>
        <translation>Zvětšit

Vergrößert die aktuelle Ansicht</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Zoom out</source>
        <translation>Zmenšit</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Zooms out the current view</source>
        <translation>Zmenší aktuální náhled</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Zoom out

Zooms out the current view</source>
        <translation>Zmenšit

Zmenší aktuální náhled</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Select</source>
        <translation>Vybrat</translation>
    </message>
    <message>
        <source>Select mode</source>
        <translation type="obsolete">Režim výběru</translation>
    </message>
    <message>
        <source>Select

Select mode</source>
        <translation type="obsolete">Vybrat

Režim výběru</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Select All</source>
        <translation>Vybrat vše</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Selects all elements</source>
        <translation>Vybere všechny objekty</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Select All

Selects all elements of the document</source>
        <translation>Vybrat vše

Vybere všechny objekty v dokumentu</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Rotate</source>
        <translation>Otočit</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Rotates the selected component by 90°</source>
        <translation>Otočí vybrané komponenty o 90°</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Rotate

Rotates the selected component by 90° counter-clockwise</source>
        <translation>Otočit

Otočí vybrané komponenty o 90° doleva</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Mirror about X Axis</source>
        <translation>Ozrcadlit podle x-ové osy</translation>
    </message>
    <message>
        <source>Mirrors the selected item about X axis</source>
        <translation type="obsolete">Zrcadlí výběr podle x-ové osy</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Mirror about X Axis

Mirrors the selected item about X Axis</source>
        <translation>Zrcadlí podle x-ové osy

Ozrcadlí výběr podle x-ové osy</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Mirror about Y Axis</source>
        <translation>Zrcadlit podle y-ové osy</translation>
    </message>
    <message>
        <source>Mirrors the selected item about Y axis</source>
        <translation type="obsolete">Zrcadlí výběr podle y-ové ose</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Mirror about Y Axis

Mirrors the selected item about Y Axis</source>
        <translation>Zrcadlit podle y-ové osy

Zrcadlí výběr podle y-ové osy</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Go into Subcircuit</source>
        <translation>Jdi do podobvodu</translation>
    </message>
    <message>
        <source>Goes inside subcircuit</source>
        <translation type="obsolete">Jít do podobvodu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Go into Subcircuit

Goes inside the selected subcircuit</source>
        <translation>Jít do podobvodu

Vstoupí do vybraného podobvodu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Pop out</source>
        <translation>Opustit podobvod</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Pop outside subcircuit</source>
        <translation>Opustí podobvod</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Pop out

Goes up one hierarchy level, i.e. leaves subcircuit</source>
        <translation>Opustit obvod

Opustí podobvod, vystoupí o úroveň výše</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Deactivate/Activate</source>
        <translation>Deaktivovat/aktivovat</translation>
    </message>
    <message>
        <source>Deactivate/Activate the selected item</source>
        <translation type="obsolete">Deaktivovat/aktivovat výběr</translation>
    </message>
    <message>
        <source>Deactivate/Activate

Deactivate/Activate the selected item</source>
        <translation type="obsolete">Deaktivovat/aktivovat

Deaktivovat/aktivovat výběr</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Insert Equation</source>
        <translation>Vložit rovnici</translation>
    </message>
    <message>
        <source>Inserts equation</source>
        <translation type="obsolete">Vloží rovnici</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Insert Equation

Inserts a user defined equation</source>
        <translation>Vložit rovnici

Vloží uživatelsky definovanou rovnici</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Insert Ground</source>
        <translation>Vložit uzemnění</translation>
    </message>
    <message>
        <source>Inserts ground</source>
        <translation type="obsolete">Vloží symbol uzemnění</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Insert Ground

Inserts a ground symbol</source>
        <translation>Vložit uzemnění

Vloží symbol uzemnění</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Insert Port</source>
        <translation>Vložit připojeníAnschluss einfügen</translation>
    </message>
    <message>
        <source>Inserts port</source>
        <translation type="obsolete">Vloží port</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Insert Port

Inserts a port symbol</source>
        <translation>Vložit port

Vloží symbol připojení</translation>
    </message>
    <message>
        <source>Insert Wire</source>
        <translation type="obsolete">Vložit vodič</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Wire</source>
        <translation>Vodič</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Inserts a wire</source>
        <translation>Vložit vodič</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Wire

Inserts a wire</source>
        <translation>Vodič

Vloží vodič</translation>
    </message>
    <message>
        <source>Insert Wire/Pin Label</source>
        <translation type="obsolete">Vložit označení vodiče/uzlu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Wire Label</source>
        <translation>Označení vodiče</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Inserts a wire or pin label</source>
        <translation>Vloží označení vodiče nebo uzlu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Wire Label

Inserts a wire or pin label</source>
        <translation>Označení vodiče

Vloží označení vodiče nebo uzlu</translation>
    </message>
    <message>
        <source>Text editor</source>
        <translation type="obsolete">Textový editor</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Text Editor</source>
        <translation>Textový editor</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Starts the Qucs text editor</source>
        <translation>Spustí textový editor programu Qucs</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Text editor

Starts the Qucs text editor</source>
        <translation>Textový editor

Spoustí textový editor Qucs</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Filter synthesis</source>
        <translation>Syntéza filtru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Starts QucsFilter</source>
        <translation>Spustí program QucsFilter</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Filter synthesis

Starts QucsFilter</source>
        <translation>Syntéza filtru

Spustí program QucsFilter</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Line calculation</source>
        <translation>Výpočet vedení</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Starts QucsTrans</source>
        <translation>Spustí program QucsTrans</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Line calculation

Starts transmission line calculator</source>
        <translation>Výpočet vedení

Spustí program pro výpočet vedení</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Component Library</source>
        <translation>Knihovna komponent</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Starts QucsLib</source>
        <translation>Spustí QucsLib</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Component Library

Starts component library program</source>
        <translation>Knihovna komponent

Spustí program pro práci s knihovnou komponent</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Matching Circuit</source>
        <translation>Přizpůsobovací obvopd</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Creates Matching Circuit</source>
        <translation>Vytvoří přizpůsobovací síť</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Matching Circuit

Dialog for Creating Matching Circuit</source>
        <translation>Přizpůsobovací síť

Dialog pro vytvoření přizpůsobovací sítě</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Simulate</source>
        <translation>Simulovat</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Simulates the current schematic</source>
        <translation>Simuluje aktuální obvod</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Simulate

Simulates the current schematic</source>
        <translation>Simulovat

Simuluje aktuální obvod</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>View Data Display/Schematic</source>
        <translation>Zobrazit data/obvod</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+3"/>
        <source>Changes to data display or schematic page</source>
        <translation>Přejde na datovou vizualizaci nebo obvod</translation>
    </message>
    <message>
        <location line="-1"/>
        <source>View Data Display/Schematic

</source>
        <translation>Zobraz data/schéma

</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Calculate DC bias</source>
        <translation>Výpočet pracovního DC bodu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Calculates DC bias and shows it</source>
        <translation>Vypočíta pracovní DC bod a zobrazí ho</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Calculate DC bias

Calculates DC bias and shows it</source>
        <translation>Výpočet pracovního DC bodu

Vypočítá pracovní DC bod a zobrazí ho</translation>
    </message>
    <message>
        <source>Set Marker</source>
        <translation type="obsolete">Nastavit označení</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Set Marker on Graph</source>
        <translation>Nastavit označení na diagramu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Sets a marker on a diagram&apos;s graph</source>
        <translation>Nastaví označení na jednom grafu v diagramu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Set Marker

Sets a marker on a diagram&apos;s graph</source>
        <translation>nastavit označení

Nastaví označení na jednom grafu v diagramu</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Show Last Messages</source>
        <translation>Zobrazit poslední hlášky</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Shows last simulation messages</source>
        <translation>Ukázat poslední hlášky ze simulace</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Show Last Messages

Shows the messages of the last simulation</source>
        <translation>Zobrazit poslední hlášky

Zobrazí hlášky poslední simulace</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Show Last Netlist</source>
        <translation>Zobrazit poslední netlist</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Shows last simulation netlist</source>
        <translation>Zobrazí naposledy simulovaný netlist</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Show Last Netlist

Shows the netlist of the last simulation</source>
        <translation>Zobrazit poslední netlisty

Ukáže naposledy simulované netlisty</translation>
    </message>
    <message>
        <source>Toolbar</source>
        <translation type="obsolete">Lišta nástrojů</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Tool&amp;bar</source>
        <translation>Lišta &amp;nástrojů</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Enables/disables the toolbar</source>
        <translation>zapne/vypne lištu nástrojů</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Toolbar

Enables/disables the toolbar</source>
        <translation>Lišta nástrojů

Zobrazí/skryje lištu nástrojů</translation>
    </message>
    <message>
        <source>Statusbar</source>
        <translation type="obsolete">Stavový řádek</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Statusbar</source>
        <translation>&amp;Stavový řádek</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Enables/disables the statusbar</source>
        <translation>Zapne/vypne stavový řádek</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Statusbar

Enables/disables the statusbar</source>
        <translation>Stavový řádek

Zapne/vypne stavový řádek</translation>
    </message>
    <message>
        <source>Help Index</source>
        <translation type="obsolete">Index s nápovědou</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Help Index...</source>
        <translation>Index s nápovědou...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Index of Qucs Help</source>
        <translation>Seznam Qucs nápovědy</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Help Index

Index of intern Qucs help</source>
        <translation>Seznam nápovědy

Seznam interní Qucs nápovědy</translation>
    </message>
    <message>
        <source>Getting Started</source>
        <translation type="obsolete">Základní nápověda</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Getting Started...</source>
        <translation>Základní nápověda...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Getting Started with Qucs</source>
        <translation>Základní nápověda pro Qucs</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Getting Started

Short introduction into Qucs</source>
        <translation>Základní nápověda

Krátký úvod do Qucs</translation>
    </message>
    <message>
        <source>About</source>
        <translation type="obsolete">O programu</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;About Qucs...</source>
        <translation>&amp;O programu Qucs...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>About the application</source>
        <translation>O aplikaci</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>About

About the application</source>
        <translation>O programu

Informace o programu</translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+442"/>
        <source>About Qt</source>
        <translation>O aplikačním prostředí Qt</translation>
    </message>
    <message>
        <location line="-443"/>
        <source>About Qt...</source>
        <translation>O aplikačním prostředí Qt...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>About Qt

About Qt by Trolltech</source>
        <translation>O aplikačním prostředí Qt

O aplikačním prostředí QT od firmy Trolltech</translation>
    </message>
    <message>
        <source>Align</source>
        <translation type="obsolete">Zarovnat</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&amp;File</source>
        <translation>&amp;Soubor</translation>
    </message>
    <message>
        <location line="+28"/>
        <source>&amp;Edit</source>
        <translation>&amp;Upravit</translation>
    </message>
    <message>
        <location line="+42"/>
        <source>&amp;Insert</source>
        <translation>&amp;Vložit</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>&amp;Project</source>
        <translation>&amp;Projekt</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>&amp;Tools</source>
        <translation>&amp;Nástroje</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>&amp;Simulation</source>
        <translation>&amp;Simulace</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>&amp;View</source>
        <translation>&amp;Náhled</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>&amp;Help</source>
        <translation>&amp;Nápověda</translation>
    </message>
    <message>
        <location line="+163"/>
        <source>Warnings in last simulation! Press F5</source>
        <translation>V poslední simulaci se vyskytly varování! Stiskněte F5</translation>
    </message>
    <message>
        <location line="-19"/>
        <location line="+41"/>
        <source>no warnings</source>
        <translation>žádná varování</translation>
    </message>
    <message>
        <source>Toggle toolbar...</source>
        <translation type="obsolete">Lišta nástrojů bude přepnuta...</translation>
    </message>
    <message>
        <source>Toggle statusbar...</source>
        <translation type="obsolete">Stavový řádek bude přepnut...</translation>
    </message>
    <message>
        <location line="+79"/>
        <source>About...</source>
        <translation>O aplikaci...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Qucs Version</source>
        <translation>Qucs verze</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Quite Universal Circuit Simulator</source>
        <translation>Docela univerzální simulátor elektrických obvodů</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+2"/>
        <source>Copyright (C)</source>
        <translation>Copyright (C)</translation>
    </message>
    <message>
        <location line="-1"/>
        <source>by Michael Margraf</source>
        <translation>Michael Margraf</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Simulator by Stefan Jahn</source>
        <translation>Simulator - Stefan Jahn</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>VHDL simulator &apos;FreeHDL&apos; by Edwin Naroska and Marius Vollmer</source>
        <translation>VHDL-Simulator &apos;FreeHDL&apos; - Edwin Naroska a Marius Vollmer</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Special thanks to Jens Flucke and Raimund Jacob</source>
        <translation>Zvláštní poděkování - Jens Flucke und Raimund Jacob</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Many thanks to Mike Brinson for correcting the VHDL output</source>
        <translation>Ozvláštně velký dík - Mike Brinson, za zlepšení na VHDL výstupech</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Translations:</source>
        <translation>Překlady:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>German by Stefan Jahn</source>
        <translation>Německy - Stefan Jahn</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Polish by Dariusz Pienkowski</source>
        <translation>Polsky - Dariusz Pienkowski</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Romanian by Radu Circa</source>
        <translation>Rumunsky - Radu Circa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>French by Vincent Habchi, F5RCS</source>
        <translation>Franzouzsky - Vincent Habchi, F5RCS</translation>
    </message>
    <message>
        <source>Portuguese by Luciano Franca</source>
        <translation type="obsolete">Portugalsky - Luciano Franca</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Spanish by Jose L. Redrejo Rodriguez</source>
        <translation>Španělsky - Jose L. Redrejo Rodriguez</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Japanese by Toyoyuki Ishikawa</source>
        <translation>Japonsky - Toyoyuki Ishikawa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Italian by Giorgio Luparia and Claudio Girardi</source>
        <translation>Italsky - Giorgio Luparia a Claudio Girardi</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hebrew by Dotan Nahum</source>
        <translation>Hebrejsky - Dotan Nahum</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Swedish by Peter Landgren</source>
        <translation>Švédsky - Peter Landgren</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Turkish by Onur and Ozgur Cobanoglu</source>
        <translation>Turecky - Onur und Ozgur Cobanoglu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hungarian by Jozsef Bus</source>
        <translation>Maďarsky - Jozsef Bus</translation>
    </message>
    <message>
        <source>Find</source>
        <translation type="obsolete">Hledat</translation>
    </message>
    <message>
        <location line="-841"/>
        <source>Find...</source>
        <translation>Hledat...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Find a piece of text</source>
        <translation>Hledat textový řetězec</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Find

Searches for a piece of text</source>
        <translation>hledat

Hledá zadaný textový řetězec</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Find Again</source>
        <translation>Hledat dále</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Find same text again</source>
        <translation>Hledat ten samý textový řetězec</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Find

Searches for the same piece of text again</source>
        <translation>Hledat

Hledá znovu ten samý text</translation>
    </message>
    <message>
        <location filename="qucs.cpp" line="-583"/>
        <source>The document was modified by another program !</source>
        <translation>Dokument byl modifikován jiným programem !</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Do you want to reload or keep this version ?</source>
        <translation>Má být znovu nahráno nebo se má pokračovat s touto verzí ?</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Reload</source>
        <translation>Znovu otevřít</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Keep it</source>
        <translation>Ponechat</translation>
    </message>
    <message>
        <location filename="qucs_init.cpp" line="-156"/>
        <source>&amp;Document Settings...</source>
        <translation>&amp;Nastavení dokumentu...</translation>
    </message>
    <message>
        <location line="+117"/>
        <source>Cuts out the selection and puts it into the clipboard</source>
        <translation>Vyřízne výběr a vloží ho do schránky</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cut

Cuts out the selection and puts it into the clipboard</source>
        <translation>Vyříznout

Vyřízne výběr a vloží ho do schránky</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Copies the selection into the clipboard</source>
        <translation>Zkopíruje výběr do schránky</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Copy

Copies the selection into the clipboard</source>
        <translation>Kopírovat

Zkopíruje výběr do schránky</translation>
    </message>
    <message>
        <location line="+157"/>
        <source>Show the whole page</source>
        <translation>Zobrazit celou stránku</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Activate select mode</source>
        <translation>Aktivovat výběrový režim</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Select

Activates select mode</source>
        <translation>Vybrat

Aktivuje výběrový režim</translation>
    </message>
    <message>
        <location line="+100"/>
        <source>VHDL entity</source>
        <translation>VHDL entita</translation>
    </message>
    <message>
        <source>Inserts sceleton of VHDL entity</source>
        <translation type="obsolete">Vloží konstrukci VHDL entity</translation>
    </message>
    <message>
        <source>VHDL entity

Inserts the sceleton of a VHDL entity</source>
        <translation type="obsolete">VHDL entita

Vloží zákldní konstrukci VHDL entity</translation>
    </message>
    <message>
        <location line="+574"/>
        <source>Russian by Igor Gorbounov</source>
        <translation>Rusky - Igor Gorbounov</translation>
    </message>
    <message>
        <location line="-572"/>
        <source>Inserts skeleton of VHDL entity</source>
        <translation>Vloží konstrukci VHDL entity</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>VHDL entity

Inserts the skeleton of a VHDL entity</source>
        <translation>VHDL entita

Vloží konstrukci VHDL entity</translation>
    </message>
    <message>
        <location line="-311"/>
        <source>Replace...</source>
        <translation>Zaměnit...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Replace

Change component properties
or
text in VHDL code</source>
        <translation>Zaměnit

Změnit vlastnosti komponenty
nebo
nahradit text ve VHDL kódu</translation>
    </message>
    <message>
        <location line="+262"/>
        <source>Deactivate/Activate selected components</source>
        <translation>Deaktivovat/aktivovat vybrané komponenty</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Deactivate/Activate

Deactivate/Activate the selected components</source>
        <translation>Deaktivovat/aktivovat

Deaktivovat/aktivovat vybrané komponenty</translation>
    </message>
    <message>
        <location line="-50"/>
        <source>Select Markers</source>
        <translation>Výběr značek</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Selects all markers</source>
        <translation>Vybere všechny značky</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Select Markers

Selects all diagram markers of the document</source>
        <translation>Výběr značek

Vybere všechny diagramové značky v dokumentu</translation>
    </message>
    <message>
        <source>Align/Distribute</source>
        <translation type="obsolete">Vyrovnat/rozdělit</translation>
    </message>
    <message>
        <source>Cannot start attenuator calculation program!</source>
        <translation type="obsolete">Nelze spustit podprogram pro výpočet atenuátoru!</translation>
    </message>
    <message>
        <location filename="qucs_actions.cpp" line="-178"/>
        <source>Please open project with subcircuits!</source>
        <translation>Je nutné otevřít projekt s podobvody!</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Please open project first!</source>
        <translation>Je nutné nejdříve otevřít projekt!</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Please select a diagram graph!</source>
        <translation>Prosím vybrat diagram nebo graf!</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>CSV file</source>
        <translation>CSV soubor</translation>
    </message>
    <message>
        <location line="-1"/>
        <source>Enter an Output File Name</source>
        <translation>Vložit výstupní jméno souboru</translation>
    </message>
    <message>
        <location line="-680"/>
        <source>Cannot start text editor! 

%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+56"/>
        <source>Cannot start filter synthesis program! 

%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Cannot start line calculation program! 

%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>Cannot start library program! 

%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+40"/>
        <source>Cannot start attenuator calculation program! 

%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Cannot start resistor color code calculation program! 

%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+43"/>
        <source>Cannot start qucshelp! 

%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+460"/>
        <source>Output file already exists!</source>
        <translation>Výstupní soubor již existuje!</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Overwrite it?</source>
        <translation>Přepsat ho?</translation>
    </message>
    <message>
        <location filename="qucs.cpp" line="-915"/>
        <source>Cannot delete file: </source>
        <translation>Nelze smazat soubor: </translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Cannot remove directory: </source>
        <translation>Nelze odstranit adresář: </translation>
    </message>
    <message>
        <location line="+697"/>
        <source>Printer Error.</source>
        <translation>Chyba při komunikaci s tiskárnou.</translation>
    </message>
    <message>
        <location filename="qucs_init.cpp" line="-317"/>
        <source>Print Fit to Page...</source>
        <translation>Upravit velikost pro tisk...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Print Fit to Page

Print and fit content to the page size</source>
        <translation>Upravit velikost pro tisk

Upraví obsah na velikost stránky a vytiskne</translation>
    </message>
    <message>
        <location line="+221"/>
        <source>Create &amp;Library...</source>
        <translation>Vytvořit &amp;knihovnu...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Create Library from Subcircuits</source>
        <translation>Vytvořit knihovnu z podobvodů</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Create Library

Create Library from Subcircuits</source>
        <translation>Vytvořit knihovnu

Vytvořit knihovnu z podobvodů</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Create &amp;Package...</source>
        <translation>Vytvořit &amp;balíček...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Create compressed Package from Projects</source>
        <translation>Vytvořit komprimovaný balíček z projektů</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Create Package

Create compressed Package from complete Projects</source>
        <translation>Vytvořit komprimovaný balíček z hotových projektů</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>E&amp;xtract Package...</source>
        <translation>Ro&amp;zbalit balíček...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Install Content of a Package</source>
        <translation>Instalovat obsah balíčku</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Extract Package

Install Content of a Package</source>
        <translation>Rozbalit balíček

Instalovat obsah balíčku</translation>
    </message>
    <message>
        <source>&amp;Import Data...</source>
        <translation type="obsolete">&amp;importovat data...</translation>
    </message>
    <message>
        <source>Convert file to Qucs data file</source>
        <translation type="obsolete">Zkonvertovat soubor do datového souboru formátu Qucs</translation>
    </message>
    <message>
        <source>Import Data

Convert data file to Qucs data file</source>
        <translation type="obsolete">Importovat datový soubor do datového formátu Qucs</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Export to &amp;CSV...</source>
        <translation>Vyexportovat do &amp;CSV...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Convert graph data to CSV file</source>
        <translation>Převést data grafu do CSV souboru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Export to CSV

Convert graph data to CSV file</source>
        <translation>Vyexportovat do CSV

Zkonvertovat grafická data do CSV souboru</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Build Verilog-A module...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Run admsXml and C++ compiler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Build Verilog-A module
Runs amdsXml and C++ compiler</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Load Verilog-A module...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Select Verilog-A symbols to be loaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Load Verilog-A module
Let the user select and load symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+175"/>
        <source>Attenuator synthesis</source>
        <translation>Syntéza atenuátoru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Starts QucsAttenuator</source>
        <translation>Spustit Qucs atenuátor</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Attenuator synthesis

Starts attenuator calculation program</source>
        <translation>Syntéza atenuátoru

Spustit podprogram pro výpočet atenuátoru</translation>
    </message>
    <message>
        <location line="+66"/>
        <source>&amp;Dock Window</source>
        <translation>&amp;Zachytit okno</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Enables/disables the browse dock window</source>
        <translation>Aktivovat/deaktivovat plovoucí okno</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Browse Window

Enables/disables the browse dock window</source>
        <translation>Okno prohlížeče

Aktivuje/deaktivuje plovoucí okno prohlížeče</translation>
    </message>
    <message>
        <location line="+42"/>
        <source>Open Recent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+136"/>
        <source>&amp;Technical Papers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <location line="+20"/>
        <location line="+19"/>
        <source>Open </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-27"/>
        <source>Technical &amp;Reports</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>T&amp;utorials</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+37"/>
        <source>File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Edit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+11"/>
        <source>View</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Work</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+151"/>
        <source>Qucs Team</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>GUI improvements by Gopala Krishna A</source>
        <translation>GUI vylepšení: Gopala Krishna A</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Verilog-AMS dynamic loader by Guilherme Brondani Torri</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Portuguese by Luciano Franca, Helio de Sousa, Guilherme Brondani Torri</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Czech by Marek Straka</source>
        <translation>České rozhraní: Marek Straka</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Catalan by Antoni Subirats</source>
        <translation>Katalánské rozhraní: Antoni Subirats</translation>
    </message>
    <message>
        <location line="-17"/>
        <source>Verilog-AMS interface by Helene Parruitte</source>
        <translation>Verilog-AMS rozhraní: Helene Parruitte</translation>
    </message>
    <message>
        <location line="-894"/>
        <source>Center horizontally</source>
        <translation>Vyrovnat vodorovně</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Center horizontally selected elements</source>
        <translation>vyrovnat vodorovně vybrané prvky</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Center horizontally

Center horizontally selected elements</source>
        <translation>Vyrovnat vodorovně

Vyrovnat vodorovně vybrané prvky</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Center vertically</source>
        <translation>Vyrovnat svisle</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Center vertically selected elements</source>
        <translation>Vyrovnat svisle vybrané provky</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Center vertically

Center vertically selected elements</source>
        <translation>Vyrovnat svisle

Vyrovnat svisle vybrané prvky</translation>
    </message>
    <message>
        <location line="+529"/>
        <source>P&amp;ositioning</source>
        <translation>U&amp;místění</translation>
    </message>
    <message>
        <source>Save</source>
        <translation type="obsolete">Uložit</translation>
    </message>
    <message>
        <source>Save All</source>
        <translation type="obsolete">Uložit vše</translation>
    </message>
    <message>
        <source>Close</source>
        <translation type="obsolete">Zavřít</translation>
    </message>
    <message>
        <source>Print...</source>
        <translation type="obsolete">Tisk...</translation>
    </message>
    <message>
        <location line="-603"/>
        <source>Print Fit to Page</source>
        <translation>Tisk na velikost stránky</translation>
    </message>
    <message>
        <location line="+79"/>
        <source>Sets selected elements on grid</source>
        <translation>Vyrovnat vybrané prvky na síť</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Moves the property text of components</source>
        <translation>Přesunout popisky komponent</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Replace component properties or VHDL code</source>
        <translation>Změnit vlastnosti komponenty nebo VHDL kód</translation>
    </message>
    <message>
        <location line="+55"/>
        <source>Export as image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+50"/>
        <source>Opens an existing project</source>
        <translation>Otevřít existující projekt</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Deletes an existing project</source>
        <translation>Smazat existující projekt</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Closes the current project</source>
        <translation>Zavřít aktuální projekt</translation>
    </message>
    <message>
        <location line="+116"/>
        <source>Mirrors the selected item about X Axis</source>
        <translation>Ozrcadlit vybraný objekt kolem X osy</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Mirrors the selected item about Y Axis</source>
        <translation>Ozrcadlit vybraný objekt kolem Y osy</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Goes inside the selected subcircuit</source>
        <translation>Přejít do podobvodu</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Inserts an equation</source>
        <translation>Vložit rovnici</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Inserts a ground symbol</source>
        <translation>Vložit symbol uzemnění</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Inserts a port symbol</source>
        <translation>Vložit symbol portu</translation>
    </message>
    <message>
        <location filename="qucs.cpp" line="-2013"/>
        <location line="+1553"/>
        <source>Verilog Sources</source>
        <translation>Verilog data</translation>
    </message>
    <message>
        <location line="-1452"/>
        <location line="+2385"/>
        <source>Verilog</source>
        <translation></translation>
    </message>
    <message>
        <source>Cannot delete Verilog source: </source>
        <translation type="obsolete">Nelze smazat Verilog data: </translation>
    </message>
    <message>
        <source>probes</source>
        <translation type="obsolete">sondy</translation>
    </message>
    <message>
        <source>verilog-a devices</source>
        <translation type="obsolete">verilog-a zařízení</translation>
    </message>
    <message>
        <location filename="qucs_init.cpp" line="-137"/>
        <source>&amp;Import/Export Data...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Convert data file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Import/Export Data

Convert data file to various file formats</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+729"/>
        <source>Arabic by Chabane Noureddine</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Kazakh by Erbol Keshubaev</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="qucs.cpp" line="-1587"/>
        <source>unknown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Verilog source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>VHDL source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>data file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>data display</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>VHDL configuration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>configuration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+43"/>
        <source>This will delete the files%1permanently! Continue ?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-959"/>
        <location line="+1553"/>
        <source>Verilog-A Sources</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1451"/>
        <source>Verilog-A</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+800"/>
        <source>Verilog-A source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+39"/>
        <source>Cannot delete the open file &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Cannot delete %1: &quot;%2&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-971"/>
        <location line="+1553"/>
        <source>Octave Scripts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1456"/>
        <source>Octave</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="qucs_init.cpp" line="-461"/>
        <source>&amp;Octave Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Shows/hides the Octave dock window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Octave Window

Shows/hides the Octave dock window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-74"/>
        <source>Resistor color codes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Starts Qucs resistor color codes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Resistor color codes

Starts standard resistor color code computation program</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QucsAttenuator</name>
    <message>
        <source>E&amp;xit</source>
        <translation type="obsolete">&amp;Ukončit</translation>
    </message>
    <message>
        <source>Help...</source>
        <translation type="obsolete">Nápověda...</translation>
    </message>
    <message>
        <source>&amp;About QucsAttenuator...</source>
        <translation type="obsolete">&amp;O programu Qucs atenuátor...</translation>
    </message>
    <message>
        <location filename="../qucs-attenuator/qucsattenuator.cpp" line="+70"/>
        <source>About Qt...</source>
        <translation>O prostředí Qt...</translation>
    </message>
    <message>
        <location line="-22"/>
        <source>&amp;File</source>
        <translation>&amp;Soubor</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;Quit</source>
        <translation type="unfinished">&amp;Ukončit</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+2"/>
        <source>&amp;Help</source>
        <translation>&amp;Nápověda</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&amp;About</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Topology</source>
        <translation>Topologie</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Input</source>
        <translation>Vstup</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Attenuation:</source>
        <translation>Útlum:</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>1</source>
        <translation>1</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>dB</source>
        <translation></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Zin:</source>
        <translation>Zin:</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+11"/>
        <source>50</source>
        <translation>50</translation>
    </message>
    <message>
        <location line="-5"/>
        <location line="+10"/>
        <location line="+20"/>
        <location line="+7"/>
        <location line="+7"/>
        <source>Ohm</source>
        <translation>Ohmů</translation>
    </message>
    <message>
        <location line="-41"/>
        <source>Zout:</source>
        <translation>Zout:</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Calculate and put into Clipboard</source>
        <translation>Spočítat a zkopírovat do schránky</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Output</source>
        <translation>Výstup</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>R1:</source>
        <translation>R1:</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+7"/>
        <location line="+7"/>
        <source>--</source>
        <translation></translation>
    </message>
    <message>
        <location line="-9"/>
        <source>R2:</source>
        <translation>R2:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>R3:</source>
        <translation>R3:</translation>
    </message>
    <message>
        <location line="+16"/>
        <location line="+125"/>
        <source>Result:</source>
        <translation>Výsledek:</translation>
    </message>
    <message>
        <location line="-107"/>
        <source>Qucs Attenuator Help</source>
        <translation type="unfinished">Nápověda pro Qucs atenuátor</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>QucsAttenuator is an attenuator synthesis program. To create a attenuator, simply enter all the input parameters and press the calculation button. Immediatly, the schematic of the attenuator is calculated and put into the clipboard. Now go to Qucs, open an schematic and press CTRL-V (paste from clipboard). The attenuator schematic can now be inserted. Have lots of fun!</source>
        <translation type="unfinished">QucsAttenuator je program pro syntézu útlumového článku. K vygenerování modelu atenuátoru zadejte všechny vstupní parametry a stikněte tlačítko Vygenerovat. Obvod s atenuátorem je vypočítán a vložen do schránky. V programu Qucs stačí potom pomocí CTRL-V vložit atenuátor do stávajícího obvodu.</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>About Qt</source>
        <translation>O prostředí Qt</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>About...</source>
        <translation>O programu...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>
Attenuator synthesis program
</source>
        <translation>
Program pro návrh atenuátoru
</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+2"/>
        <source>Copyright (C) 2006 by</source>
        <translation>Copyright (C) 2006 :</translation>
    </message>
    <message>
        <location line="+82"/>
        <source>Success!</source>
        <translation>úspěšně!</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Error: Set Attenuation less than %1 dB</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error: Set Attenuation more than %1 dB</source>
        <translation type="obsolete">Chyba: Nastavit útlum více než %1 db</translation>
    </message>
</context>
<context>
    <name>QucsEdit</name>
    <message>
        <source>Pastes the clipboard contents to the cursor position</source>
        <translation type="obsolete">Vloží obsah schránky na pozici kurzoru</translation>
    </message>
    <message>
        <source>Paste

Pastes the clipboard contents to the cursor position</source>
        <translation type="obsolete">Vložit

Vloží obsah schránky na místo kurzoru</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation type="obsolete">Smazat</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Smazat</translation>
    </message>
    <message>
        <source>Del</source>
        <translation type="obsolete">Smazat</translation>
    </message>
    <message>
        <source>Deletes the selected components</source>
        <translation type="obsolete">Smaže vybrané komponenty</translation>
    </message>
    <message>
        <source>Delete

Deletes the selected components</source>
        <translation type="obsolete">Smazat

Löscht die ausgewählten Komponenten</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation type="obsolete">Smazat</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation type="obsolete">&amp;Vrátit zpět</translation>
    </message>
    <message>
        <source>Ctrl+Z</source>
        <translation type="obsolete">Ctrl+Z</translation>
    </message>
    <message>
        <source>Undoes the last command</source>
        <translation type="obsolete">Vrátí zpět poslední příkaz</translation>
    </message>
    <message>
        <source>Undo

Makes the last action undone</source>
        <translation type="obsolete">Zpět

Vrátí zpět poslední příkaz</translation>
    </message>
    <message>
        <source>Redo</source>
        <translation type="obsolete">Opakovat</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation type="obsolete">&amp;Opakovat</translation>
    </message>
    <message>
        <source>Ctrl+Y</source>
        <translation type="obsolete">Ctrl+Y</translation>
    </message>
    <message>
        <source>Redoes the last command</source>
        <translation type="obsolete">Opakuje poslední příkaz</translation>
    </message>
    <message>
        <source>Redo

Repeats the last action once more</source>
        <translation type="obsolete">Opakovat

Opakuje poslední příkaz</translation>
    </message>
    <message>
        <source>New Project</source>
        <translation type="obsolete">Nový projekt</translation>
    </message>
    <message>
        <source>&amp;New Project...</source>
        <translation type="obsolete">&amp;Nový projekt...</translation>
    </message>
    <message>
        <source>Creates a new project</source>
        <translation type="obsolete">Vytvoří nový projekt</translation>
    </message>
    <message>
        <source>New Project

Creates a new project</source>
        <translation type="obsolete">Nový projekt

Vytvoří nový projekt</translation>
    </message>
    <message>
        <source>Open Project</source>
        <translation type="obsolete">Otevřít projekt</translation>
    </message>
    <message>
        <source>&amp;Open Project...</source>
        <translation type="obsolete">otevřít &amp;projekt</translation>
    </message>
    <message>
        <source>Opens a project</source>
        <translation type="obsolete">Otevře projekt</translation>
    </message>
    <message>
        <source>Open Project

Opens an existing project</source>
        <translation type="obsolete">Otevřít projekt

Otevře existující projekt</translation>
    </message>
    <message>
        <source>Delete Project</source>
        <translation type="obsolete">Smazat projekt</translation>
    </message>
    <message>
        <source>&amp;Delete Project...</source>
        <translation type="obsolete">&amp;Smazat Projekt</translation>
    </message>
    <message>
        <source>Deletes a project</source>
        <translation type="obsolete">Smaže projekt</translation>
    </message>
    <message>
        <source>Delete Project

Deletes an existing project</source>
        <translation type="obsolete">Smazat projekt

Smaže existující projekt</translation>
    </message>
    <message>
        <source>View All</source>
        <translation type="obsolete">Zobrazit vše</translation>
    </message>
    <message>
        <source>Views the whole page</source>
        <translation type="obsolete">Zobrazí celou stránku</translation>
    </message>
    <message>
        <source>View All

Shows the whole page content</source>
        <translation type="obsolete">Zobrazit vše

Zobrazí celou stránku</translation>
    </message>
    <message>
        <source>View 1:1</source>
        <translation type="obsolete">Měřítko 1:1</translation>
    </message>
    <message>
        <source>1</source>
        <translation type="obsolete">1</translation>
    </message>
    <message>
        <source>Views without magnification</source>
        <translation type="obsolete">Zobrazení bez zvětšení</translation>
    </message>
    <message>
        <source>View 1:1

Shows the page content without magnification</source>
        <translation type="obsolete">Měřítko 1:1

Zobrazí obsah stránky bez zvětšení</translation>
    </message>
    <message>
        <source>Zoom in</source>
        <translation type="obsolete">Zvětšit</translation>
    </message>
    <message>
        <source>+</source>
        <translation type="obsolete">+</translation>
    </message>
    <message>
        <source>Zooms into the current view</source>
        <translation type="obsolete">Zvětší aktuální náhled</translation>
    </message>
    <message>
        <source>Zoom in

Zooms the current view</source>
        <translation type="obsolete">Zvětšit

Zvětší aktuální náhled</translation>
    </message>
    <message>
        <source>Zoom out</source>
        <translation type="obsolete">Zmenšit</translation>
    </message>
    <message>
        <source>-</source>
        <translation type="obsolete">-</translation>
    </message>
    <message>
        <source>Zooms out the current view</source>
        <translation type="obsolete">Zmenšit aktuální pohled</translation>
    </message>
    <message>
        <source>Reduce

Zooms out the current view</source>
        <translation type="obsolete">Zmenšit

Zmenší aktuální pohled</translation>
    </message>
    <message>
        <source>Select</source>
        <translation type="obsolete">Vybrat</translation>
    </message>
    <message>
        <source>Esc</source>
        <translation type="obsolete">Esc</translation>
    </message>
    <message>
        <source>Select mode</source>
        <translation type="obsolete">Výběr módu</translation>
    </message>
    <message>
        <source>Select

Select mode</source>
        <translation type="obsolete">Výběr

Režim výběru</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation type="obsolete">Vybrat vše</translation>
    </message>
    <message>
        <source>Ctrl+A</source>
        <translation type="obsolete">Ctrl+A</translation>
    </message>
    <message>
        <source>Selects all elements</source>
        <translation type="obsolete">Vybrat vše</translation>
    </message>
    <message>
        <source>Select All

Selects all elements of the document</source>
        <translation type="obsolete">Vybrat vše

Vybrání všech elementů v dokumentu</translation>
    </message>
    <message>
        <source>Rotate</source>
        <translation type="obsolete">Otočit</translation>
    </message>
    <message>
        <source>Rotates the selected component by 90°</source>
        <translation type="obsolete">Otočí vybrané komponenten o 90°</translation>
    </message>
    <message>
        <source>Rotate

Rotates the selected component by 90° counter-clockwise</source>
        <translation type="obsolete">Otočit

Otočí vybrané komponenty o 90° ve směru hod. ručiček</translation>
    </message>
    <message>
        <source>Mirror about X Axis</source>
        <translation type="obsolete">Zrcadlit podle x-ové osy</translation>
    </message>
    <message>
        <source>Mirrors the selected item about X axis</source>
        <translation type="obsolete">Zrcadlit výběr podle x-ové osy</translation>
    </message>
    <message>
        <source>Mirror about X Axis

Mirrors the selected item about X Axis</source>
        <translation type="obsolete">Zrcadlit podle x-ové osy

Zrcadlit výběr na x-ové ose</translation>
    </message>
    <message>
        <source>Mirror about Y Axis</source>
        <translation type="obsolete">Zrcadlit podle y-ové osy</translation>
    </message>
    <message>
        <source>Mirrors the selected item about Y axis</source>
        <translation type="obsolete">Zrcadlí výběr podle x-ové osy</translation>
    </message>
    <message>
        <source>Mirror about Y Axis

Mirrors the selected item about Y Axis</source>
        <translation type="obsolete">Zrcadlit výběr podle y-ové osy</translation>
    </message>
    <message>
        <source>Go into Subcircuit</source>
        <translation type="obsolete">Vejít dovnitř podobvodu</translation>
    </message>
    <message>
        <source>Goes inside subcircuit</source>
        <translation type="obsolete">Vchod do podobvodu</translation>
    </message>
    <message>
        <source>Go into Subcircuit

Goes inside the selected subcircuit</source>
        <translation type="obsolete">Jít do podobvodu

Zobrazí vybraný podobvod</translation>
    </message>
    <message>
        <source>Pop out</source>
        <translation type="obsolete">Opustit podobvod</translation>
    </message>
    <message>
        <source>Pop outside subcircuit</source>
        <translation type="obsolete">Opustí podobvod</translation>
    </message>
    <message>
        <source>Pop out

Goes up one hierarchy level, i.e. leaves subcircuit</source>
        <translation type="obsolete">Opustit podobvod

Opustí podobvod do nejbližší vyšší hierarchické úrovně</translation>
    </message>
    <message>
        <source>Deactivate/Activate</source>
        <translation type="obsolete">Deaktivovat/Aktivovat</translation>
    </message>
    <message>
        <source>Deactivate/Activate the selected item</source>
        <translation type="obsolete">Deaktivovat/Aktivovat výběr</translation>
    </message>
    <message>
        <source>Deactivate/Activate

Deactivate/Activate the selected item</source>
        <translation type="obsolete">Deaktivovat/Aktivovat

Deaktivuje/Aktivuje výběr</translation>
    </message>
    <message>
        <source>Insert Equation</source>
        <translation type="obsolete">Vložit rovnici</translation>
    </message>
    <message>
        <source>Inserts equation</source>
        <translation type="obsolete">Vloží rovnici</translation>
    </message>
    <message>
        <source>Insert Equation

Inserts a user defined equation</source>
        <translation type="obsolete">Vložit rovnici

Vloží uživatelsky definovanou rovnici</translation>
    </message>
    <message>
        <source>Insert Ground</source>
        <translation type="obsolete">Vložit zem</translation>
    </message>
    <message>
        <source>Inserts ground</source>
        <translation type="obsolete">Vloží symbol uzemnění</translation>
    </message>
    <message>
        <source>Insert Ground

Inserts a ground symbol</source>
        <translation type="obsolete">Vložit zem

vloží symbol zemnění</translation>
    </message>
    <message>
        <source>Insert Port</source>
        <translation type="obsolete">Vložit port</translation>
    </message>
    <message>
        <source>Inserts port</source>
        <translation type="obsolete">Vloží port</translation>
    </message>
    <message>
        <source>Insert Port

Inserts a port symbol</source>
        <translation type="obsolete">Vložit port

Vloží symbol portu</translation>
    </message>
    <message>
        <source>Insert Wire</source>
        <translation type="obsolete">Vložit vodič</translation>
    </message>
    <message>
        <source>Wire</source>
        <translation type="obsolete">Vodič</translation>
    </message>
    <message>
        <source>Inserts a wire</source>
        <translation type="obsolete">Vloží vodič</translation>
    </message>
    <message>
        <source>Wire

Inserts a wire</source>
        <translation type="obsolete">Vodič

Vloží vodivé spojení</translation>
    </message>
    <message>
        <source>Insert Wire/Pin Label</source>
        <translation type="obsolete">Vložit označení spojení-uzlu</translation>
    </message>
    <message>
        <source>Wire Label</source>
        <translation type="obsolete">Označení spojení</translation>
    </message>
    <message>
        <source>Inserts a wire or pin label</source>
        <translation type="obsolete">Vloží označení spojení nebo uzlu</translation>
    </message>
    <message>
        <source>Wire Label

Inserts a wire or pin label</source>
        <translation type="obsolete">Označení spojení

Vloží označení spojení nebo uzlu</translation>
    </message>
    <message>
        <source>Simulate</source>
        <translation type="obsolete">Spustit simulaci</translation>
    </message>
    <message>
        <source>Simulates the current schematic</source>
        <translation type="obsolete">Spustí simulaci aktuálního schématu</translation>
    </message>
    <message>
        <source>Simulate

Simulates the current schematic</source>
        <translation type="obsolete">Spustit simulaci

Spustí simulaci aktuálního schématu</translation>
    </message>
    <message>
        <source>View Data Display/Schematic</source>
        <translation type="obsolete">Zobrazit Data nebo Schéma</translation>
    </message>
    <message>
        <source>Changes to data display or schematic page</source>
        <translation type="obsolete">Přechod na datovou vizualizaci nebo na plán</translation>
    </message>
    <message>
        <source>View Data Display/Schematic

Changes to data display or schematic page</source>
        <translation type="obsolete">Zobrazit Data nebo Schéma

Přepne na datovou vizualizaci nebo na schéma</translation>
    </message>
    <message>
        <source>Show Last Messages</source>
        <translation type="obsolete">Ukázat poslední hlášky</translation>
    </message>
    <message>
        <source>Shows last simulation messages</source>
        <translation type="obsolete">Zobrazí poslední simulační hlášky</translation>
    </message>
    <message>
        <source>Show Last Messages

Shows the messages of the last simulation</source>
        <translation type="obsolete">Ukázat poslední hlášky

Zobrazí hlášky z poslední simulace</translation>
    </message>
    <message>
        <source>Show Last Netlist</source>
        <translation type="obsolete">Zobrazit poslední netlist</translation>
    </message>
    <message>
        <source>Shows last simulation netlist</source>
        <translation type="obsolete">Zobrazí naposledy odsimulovaný netlist</translation>
    </message>
    <message>
        <source>Show Last Netlist

Shows the netlist of the last simulation</source>
        <translation type="obsolete">Zobrazit poslední netlist

Zobrazí naposledy odsimulovaný netlist</translation>
    </message>
    <message>
        <source>Toolbar</source>
        <translation type="obsolete">Lišta s nástroji</translation>
    </message>
    <message>
        <source>Tool&amp;bar</source>
        <translation type="obsolete">Lišta s &amp;nástroji</translation>
    </message>
    <message>
        <source>Enables/disables the toolbar</source>
        <translation type="obsolete">Zapíná/vypíná lištu nástrojů</translation>
    </message>
    <message>
        <source>Toolbar

Enables/disables the toolbar</source>
        <translation type="obsolete">Lišta nástrojů

Zapíná/vypíná lištu nástrojů</translation>
    </message>
    <message>
        <source>Statusbar</source>
        <translation type="obsolete">Stavový řádek</translation>
    </message>
    <message>
        <source>&amp;Statusbar</source>
        <translation type="obsolete">&amp;Stavový řádek</translation>
    </message>
    <message>
        <source>Enables/disables the statusbar</source>
        <translation type="obsolete">Aktivuje/deaktivuje stavový řádek</translation>
    </message>
    <message>
        <source>Statusbar

Enables/disables the statusbar</source>
        <translation type="obsolete">Statuszeile

Aktivuje/deaktivuje stavový řádek</translation>
    </message>
    <message>
        <location filename="../qucs-edit/qucsedit.cpp" line="+57"/>
        <source>About</source>
        <translation>O aplikaci</translation>
    </message>
    <message>
        <source>&amp;About Qucs...</source>
        <translation type="obsolete">&amp;O programu Qucs..</translation>
    </message>
    <message>
        <source>About the application</source>
        <translation type="obsolete">O aplikaci</translation>
    </message>
    <message>
        <source>About

About the application</source>
        <translation type="obsolete">O programu

O aplikaci</translation>
    </message>
    <message>
        <source>About Qt</source>
        <translation type="obsolete">O platformě Qt</translation>
    </message>
    <message>
        <source>&amp;About Qt...</source>
        <translation type="obsolete">O vývojovém prostředí &amp;Qt...</translation>
    </message>
    <message>
        <source>About Qt

About Qt by Trolltech</source>
        <translation type="obsolete">O vývojovém prostředí Qt

O vývojovém prostředí Qt firmy Trolltech</translation>
    </message>
    <message>
        <source>&amp;File</source>
        <translation type="obsolete">&amp;Soubor</translation>
    </message>
    <message>
        <source>&amp;Edit</source>
        <translation type="obsolete">&amp;Upravit</translation>
    </message>
    <message>
        <source>&amp;Insert</source>
        <translation type="obsolete">&amp;Vložit</translation>
    </message>
    <message>
        <source>&amp;Project</source>
        <translation type="obsolete">&amp;Projekt</translation>
    </message>
    <message>
        <source>&amp;Simulation</source>
        <translation type="obsolete">&amp;Simulace</translation>
    </message>
    <message>
        <source>&amp;View</source>
        <translation type="obsolete">&amp;Náhled</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="obsolete">&amp;Nápověda</translation>
    </message>
    <message>
        <source>Ready.</source>
        <translation type="obsolete">Hotovo.</translation>
    </message>
    <message>
        <source>Open</source>
        <translation type="obsolete">Otevřít</translation>
    </message>
    <message>
        <source>Projects</source>
        <translation type="obsolete">Projekty</translation>
    </message>
    <message>
        <source>content of the project directory</source>
        <translation type="obsolete">Obsah adresáře s projektem</translation>
    </message>
    <message>
        <source>Content of</source>
        <translation type="obsolete">Obsah</translation>
    </message>
    <message>
        <source>Note</source>
        <translation type="obsolete">Poznámka</translation>
    </message>
    <message>
        <source>Datasets</source>
        <translation type="obsolete">Datové sady</translation>
    </message>
    <message>
        <source>Data Displays</source>
        <translation type="obsolete">Datové vizualizace</translation>
    </message>
    <message>
        <source>Schematics</source>
        <translation type="obsolete">Schémata</translation>
    </message>
    <message>
        <source>Content</source>
        <translation type="obsolete">Obsah</translation>
    </message>
    <message>
        <source>content of the open project</source>
        <translation type="obsolete">Obsah otevřeného projektu</translation>
    </message>
    <message>
        <source>Components</source>
        <translation type="obsolete">Komponenty</translation>
    </message>
    <message>
        <source>components and diagrams</source>
        <translation type="obsolete">Komponenty a diagramy</translation>
    </message>
    <message>
        <source>lumped components</source>
        <translation type="obsolete">diskrétní komponenty</translation>
    </message>
    <message>
        <source>sources</source>
        <translation type="obsolete">zdroje</translation>
    </message>
    <message>
        <source>transmission lines</source>
        <translation type="obsolete">Přenosové cesty</translation>
    </message>
    <message>
        <source>nonlinear components</source>
        <translation type="obsolete">nelineární komponenty</translation>
    </message>
    <message>
        <source>file data</source>
        <translation type="obsolete">data z dokumentů</translation>
    </message>
    <message>
        <source>simulations</source>
        <translation type="obsolete">Simulace</translation>
    </message>
    <message>
        <source>paintings</source>
        <translation type="obsolete">Grafické objekty</translation>
    </message>
    <message>
        <source>diagrams</source>
        <translation type="obsolete">Diagramy</translation>
    </message>
    <message>
        <source>Warning</source>
        <translation type="obsolete">Upozornění</translation>
    </message>
    <message>
        <source>Cannot create work directory !</source>
        <translation type="obsolete">Pracovní adresář nelze vytvořit !</translation>
    </message>
    <message>
        <source>Closing Qucs document</source>
        <translation type="obsolete">Uzavření Qucs dokumentu</translation>
    </message>
    <message>
        <source>This document contains unsaved changes!
Do you want to save the changes before closing?</source>
        <translation type="obsolete">Tento dokument obsahuje neuložené změny!
Chcete před uzavřením uložit tyto změny?</translation>
    </message>
    <message>
        <source>Creating new schematic...</source>
        <translation type="obsolete">Vytvoření nového schématu...</translation>
    </message>
    <message>
        <source>Opening file...</source>
        <translation type="obsolete">Otevřít soubor...</translation>
    </message>
    <message>
        <source>Schematic (*.sch)</source>
        <translation type="obsolete">Schéma (*.sch)</translation>
    </message>
    <message>
        <source>Enter a Schematic Name</source>
        <translation type="obsolete">Zadejte jméno schématu</translation>
    </message>
    <message>
        <source>Opening aborted</source>
        <translation type="obsolete">Otevírání přerušeno</translation>
    </message>
    <message>
        <source>-port</source>
        <translation type="obsolete">-port</translation>
    </message>
    <message>
        <source>Enter Name to Save Document</source>
        <translation type="obsolete">Zadat jméno pro ukládaný dokument</translation>
    </message>
    <message>
        <source>Saving file...</source>
        <translation type="obsolete">Ukládání souboru...</translation>
    </message>
    <message>
        <source>Saving aborted</source>
        <translation type="obsolete">Ukládání přerušeno</translation>
    </message>
    <message>
        <source>Saving file under new filename...</source>
        <translation type="obsolete">Uložení souboru pod novým jménem...</translation>
    </message>
    <message>
        <source>Saving all files...</source>
        <translation type="obsolete">Uložit všechny soubory...</translation>
    </message>
    <message>
        <source>Closing file...</source>
        <translation type="obsolete">Uzavřít soubor...</translation>
    </message>
    <message>
        <source>The document contains unsaved changes!
Do you want to save the changes before closing?</source>
        <translation type="obsolete">Tento dokument obsahuje ještě neuložené změny!
Chcete změny před uzavřením uložit?</translation>
    </message>
    <message>
        <location line="+146"/>
        <source>&amp;Discard</source>
        <translation>&amp;Zahodit</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Zrušit</translation>
    </message>
    <message>
        <source>Printing...</source>
        <translation type="obsolete">Tisk...</translation>
    </message>
    <message>
        <source>Exiting application...</source>
        <translation type="obsolete">Ukončit aplikaci...</translation>
    </message>
    <message>
        <source>Quit...</source>
        <translation type="obsolete">Ukončit...</translation>
    </message>
    <message>
        <source>Do you really want to quit?</source>
        <translation type="obsolete">Chcete opravdu program opustit?</translation>
    </message>
    <message>
        <source>Cutting selection...</source>
        <translation type="obsolete">Vystřihnout výběr z...</translation>
    </message>
    <message>
        <source>Copying selection to clipboard...</source>
        <translation type="obsolete">Zkopírovat výběr do schránky...</translation>
    </message>
    <message>
        <source>Inserting clipboard contents...</source>
        <translation type="obsolete">Vložit obsah do schránky...</translation>
    </message>
    <message>
        <source>Toggle toolbar...</source>
        <translation type="obsolete">Změnit lištu nástrojů...</translation>
    </message>
    <message>
        <source>Toggle statusbar...</source>
        <translation type="obsolete">Změnit stavový řádek...</translation>
    </message>
    <message>
        <location line="-93"/>
        <source>About...</source>
        <translation>O aplikaci...</translation>
    </message>
    <message>
        <source>Qucs Version </source>
        <translation type="obsolete">Verze Qucs </translation>
    </message>
    <message>
        <source>
Quite Universal Circuit Simulator
</source>
        <translation type="obsolete">
Quite universal circuit simulator
</translation>
    </message>
    <message>
        <source>Starting new simulation on </source>
        <translation type="obsolete">Spustit novou simulaci </translation>
    </message>
    <message>
        <source> at </source>
        <translation type="obsolete"> na </translation>
    </message>
    <message>
        <source>creating netlist ....</source>
        <translation type="obsolete">vytvoření netlistu... </translation>
    </message>
    <message>
        <source>ERROR: Cannot create netlist file!
Aborted.</source>
        <translation type="obsolete">CHYBA: netlist nelze vytvořit!
Abgebrochen.</translation>
    </message>
    <message>
        <source>done.
</source>
        <translation type="obsolete">hotovo.
</translation>
    </message>
    <message>
        <source>ERROR: Cannot start simulator!</source>
        <translation type="obsolete">Hotovo: Simulátor nelze spustit!</translation>
    </message>
    <message>
        <source>
Simulation ended on </source>
        <translation type="obsolete">
Simulace ukončena v </translation>
    </message>
    <message>
        <source>Ready.
</source>
        <translation type="obsolete">Hotovo.
</translation>
    </message>
    <message>
        <source>
Errors occured during simulation on </source>
        <translation type="obsolete">
Během simulace se vyskytly chyby v </translation>
    </message>
    <message>
        <source>Aborted.
</source>
        <translation type="obsolete">Přerušeno.
</translation>
    </message>
    <message>
        <source>Output:
----------

</source>
        <translation type="obsolete">Výstup:
----------

</translation>
    </message>
    <message>
        <source>


Errors:
--------

</source>
        <translation type="obsolete">


Chyba:
--------

</translation>
    </message>
    <message>
        <location line="+32"/>
        <location line="+39"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <source>No page set !</source>
        <translation type="obsolete">Stránka není nastavena !</translation>
    </message>
    <message>
        <source>Cannot create </source>
        <translation type="obsolete">Nelze vytvořit </translation>
    </message>
    <message>
        <source>Choose Project Directory for Opening</source>
        <translation type="obsolete">Vybrat adresář s projektem k otevření</translation>
    </message>
    <message>
        <source>Cannot access project directory: </source>
        <translation type="obsolete">Adresář s projektem neni přístupný: </translation>
    </message>
    <message>
        <source>Content of &apos;</source>
        <translation type="obsolete">Obsah &apos;</translation>
    </message>
    <message>
        <source>&apos;</source>
        <translation type="obsolete">&apos;</translation>
    </message>
    <message>
        <source> - Project: </source>
        <translation type="obsolete"> - Projekt: </translation>
    </message>
    <message>
        <source>Info</source>
        <translation type="obsolete">Informace</translation>
    </message>
    <message>
        <source>Cannot create project directory !</source>
        <translation type="obsolete">Adresář pro projekt nelze vytvořit !</translation>
    </message>
    <message>
        <source>Resistor</source>
        <translation type="obsolete">Odpor</translation>
    </message>
    <message>
        <source>Resistor US</source>
        <translation type="obsolete">Odpor US</translation>
    </message>
    <message>
        <source>Capacitor</source>
        <translation type="obsolete">Kondenzátor</translation>
    </message>
    <message>
        <source>Inductor</source>
        <translation type="obsolete">Cívka</translation>
    </message>
    <message>
        <source>Ground</source>
        <translation type="obsolete">Země</translation>
    </message>
    <message>
        <source>Subcircuit Port</source>
        <translation type="obsolete">Připojení podobvodu</translation>
    </message>
    <message>
        <source>Transformer</source>
        <translation type="obsolete">Transformátor</translation>
    </message>
    <message>
        <source>symmetric Transformer</source>
        <translation type="obsolete">symetrický transformátor</translation>
    </message>
    <message>
        <source>dc Block</source>
        <translation type="obsolete">DC-blokace</translation>
    </message>
    <message>
        <source>dc Feed</source>
        <translation type="obsolete">DC-přívod</translation>
    </message>
    <message>
        <source>Attenuator</source>
        <translation type="obsolete">Tlumící člen</translation>
    </message>
    <message>
        <source>Isolator</source>
        <translation type="obsolete">Izolátor</translation>
    </message>
    <message>
        <source>Circulator</source>
        <translation type="obsolete">Cirkulátor</translation>
    </message>
    <message>
        <source>Gyrator</source>
        <translation type="obsolete">Gyrátor</translation>
    </message>
    <message>
        <source>Phase Shifter</source>
        <translation type="obsolete">Fázový posunovač</translation>
    </message>
    <message>
        <source>dc Voltage Source</source>
        <translation type="obsolete">DC napěťový zdroj</translation>
    </message>
    <message>
        <source>dc Current Source</source>
        <translation type="obsolete">DC proudový zdroj</translation>
    </message>
    <message>
        <source>ac Voltage Source</source>
        <translation type="obsolete">AC napěťový zdroj</translation>
    </message>
    <message>
        <source>Power Source</source>
        <translation type="obsolete">Zdroj signálu</translation>
    </message>
    <message>
        <source>Voltage Controlled Current Source</source>
        <translation type="obsolete">Napěťově řízený zdroj proudu</translation>
    </message>
    <message>
        <source>Current Controlled Current Source</source>
        <translation type="obsolete">Proudově řízený zdroj proudu</translation>
    </message>
    <message>
        <source>Voltage Controlled Voltage Source</source>
        <translation type="obsolete">Napěťově řízený zdroj napětí</translation>
    </message>
    <message>
        <source>Current Controlled Voltage Source</source>
        <translation type="obsolete">Napěťově řízený zdroj napětí</translation>
    </message>
    <message>
        <source>Transmission Line</source>
        <translation type="obsolete">Přenosové vedení</translation>
    </message>
    <message>
        <source>Substrate</source>
        <translation type="obsolete">Substrát</translation>
    </message>
    <message>
        <source>Microstrip Line</source>
        <translation type="obsolete">Mikropáskové vedení</translation>
    </message>
    <message>
        <source>Coupled Microstrip Line</source>
        <translation type="obsolete">Svázané mikropáskové vedení</translation>
    </message>
    <message>
        <source>Microstrip Step</source>
        <translation type="obsolete">Mikropáskový odstup</translation>
    </message>
    <message>
        <source>Microstrip Corner</source>
        <translation type="obsolete">Mikropáskový úhel</translation>
    </message>
    <message>
        <source>Microstrip Tee</source>
        <translation type="obsolete">Mikropáskové T-rozbočení</translation>
    </message>
    <message>
        <source>Microstrip Cross</source>
        <translation type="obsolete">Mikropáskové křížení</translation>
    </message>
    <message>
        <source>Coplanar Line</source>
        <translation type="obsolete">Koplanární vedení</translation>
    </message>
    <message>
        <source>Diode</source>
        <translation type="obsolete">Dioda</translation>
    </message>
    <message>
        <source>1-port S parameter file</source>
        <translation type="obsolete">1-portový S parametr soubor</translation>
    </message>
    <message>
        <source>2-port S parameter file</source>
        <translation type="obsolete">2-portový S parametr soubor</translation>
    </message>
    <message>
        <source>3-port S parameter file</source>
        <translation type="obsolete">3-portový S parametr soubor</translation>
    </message>
    <message>
        <source>4-port S parameter file</source>
        <translation type="obsolete">4-portový S parametr soubor</translation>
    </message>
    <message>
        <source>5-port S parameter file</source>
        <translation type="obsolete">5-portový S parametr soubor</translation>
    </message>
    <message>
        <source>6-port S parameter file</source>
        <translation type="obsolete">6-portový S parametr soubor</translation>
    </message>
    <message>
        <source>dc simulation</source>
        <translation type="obsolete">DC simulace</translation>
    </message>
    <message>
        <source>Transienten simulation</source>
        <translation type="obsolete">Přechodová simulace</translation>
    </message>
    <message>
        <source>ac simulation</source>
        <translation type="obsolete">AC simulace</translation>
    </message>
    <message>
        <source>S-parameter simulation</source>
        <translation type="obsolete">S-Parameter simulace</translation>
    </message>
    <message>
        <source>Parameter sweep</source>
        <translation type="obsolete">Variace parametru</translation>
    </message>
    <message>
        <source>Line</source>
        <translation type="obsolete">Čára</translation>
    </message>
    <message>
        <source>Arrow</source>
        <translation type="obsolete">Šipka</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">Text</translation>
    </message>
    <message>
        <source>Ellipse</source>
        <translation type="obsolete">Elipsa</translation>
    </message>
    <message>
        <source>Rectangle</source>
        <translation type="obsolete">Obdélník</translation>
    </message>
    <message>
        <source>Cartesian</source>
        <translation type="obsolete">Kartézký</translation>
    </message>
    <message>
        <source>Polar</source>
        <translation type="obsolete">Polární</translation>
    </message>
    <message>
        <source>Tabular</source>
        <translation type="obsolete">Tabulka</translation>
    </message>
    <message>
        <source>Smith Chart</source>
        <translation type="obsolete">Smithův diagram</translation>
    </message>
    <message>
        <source>No project is selected !</source>
        <translation type="obsolete">Není vybrán žádné projekt !</translation>
    </message>
    <message>
        <source>Cannot delete an open project !</source>
        <translation type="obsolete">Otevřený projekt nelze smazat !</translation>
    </message>
    <message>
        <source>This will destroy all the project
files permanently !
Go on ?</source>
        <translation type="obsolete">Tímto budou nenávratně smazány všechny
soubory z projektu !
Pokračovat ?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="obsolete">&amp;Ano</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;Ne</translation>
    </message>
    <message>
        <source>Cannot remove project file: </source>
        <translation type="obsolete">Z projektu nelze smazat soubor: </translation>
    </message>
    <message>
        <source>Cannot remove project directory !</source>
        <translation type="obsolete">Adresář s projektem nelze smazat !</translation>
    </message>
    <message>
        <source>Choose Project Directory for Deleting</source>
        <translation type="obsolete">Vyberte projektový adresář ke smazání</translation>
    </message>
    <message>
        <source>Help Index</source>
        <translation type="obsolete">Seznam nápovědy</translation>
    </message>
    <message>
        <source>Help Index...</source>
        <translation type="obsolete">Seznam nápovědy...</translation>
    </message>
    <message>
        <source>Index of Qucs Help</source>
        <translation type="obsolete">Seznam nápovědy k programu Qucs</translation>
    </message>
    <message>
        <source>Help Index

Index of intern Qucs help</source>
        <translation type="obsolete">Seznam nápovědy

Seznam interní nápovědy programu Qucs</translation>
    </message>
    <message>
        <source>Getting Started</source>
        <translation type="obsolete">Základní nápověda</translation>
    </message>
    <message>
        <source>Getting Started...</source>
        <translation type="obsolete">Základní nápověda...</translation>
    </message>
    <message>
        <source>Getting Started with Qucs</source>
        <translation type="obsolete">Základní nápověda pro Qucs</translation>
    </message>
    <message>
        <source>Getting Started

Short introduction into Qucs</source>
        <translation type="obsolete">Základní nápověda

Stručný úvod do programu Qucs</translation>
    </message>
    <message>
        <source>Current Probe</source>
        <translation type="obsolete">Ampérmetr</translation>
    </message>
    <message>
        <source>Noise Voltage Source</source>
        <translation type="obsolete">Napěťový zdroj rušení</translation>
    </message>
    <message>
        <source>Noise Current Source</source>
        <translation type="obsolete">Proudový zdroj rušení</translation>
    </message>
    <message>
        <source>Microstrip Mitered Bend</source>
        <translation type="obsolete">Oříznutý mikropásek</translation>
    </message>
    <message>
        <source>Microstrip Open</source>
        <translation type="obsolete">Otevřené mikropáskové vedení</translation>
    </message>
    <message>
        <source>Cannot save settings !</source>
        <translation type="obsolete">Nastavení nelze uložit !</translation>
    </message>
    <message>
        <source>Rename</source>
        <translation type="obsolete">Přejmenovat</translation>
    </message>
    <message>
        <source>Rename file</source>
        <translation type="obsolete">Přejmenovat soubor</translation>
    </message>
    <message>
        <source>Enter new name:</source>
        <translation type="obsolete">Zadat nové jméno:</translation>
    </message>
    <message>
        <source>This will delete the file permanently! Continue ?</source>
        <translation type="obsolete">Tento soubor bude nenávratně smazán! Pokračovat ?</translation>
    </message>
    <message>
        <source>Cannot rename file: </source>
        <translation type="obsolete">Soubor nelze přejmenovat: </translation>
    </message>
    <message>
        <source>Cannot delete schematic: </source>
        <translation type="obsolete">Schéma nelze smazat: </translation>
    </message>
    <message>
        <source>Cannot delete an open file!</source>
        <translation type="obsolete">Otevřený soubor nelze smazat!</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="obsolete">Ne</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="obsolete">Ano</translation>
    </message>
    <message>
        <source>Cannot rename an open file!</source>
        <translation type="obsolete">Otevřený soubor nelze přejmenovat!</translation>
    </message>
    <message>
        <source>Transient simulation</source>
        <translation type="obsolete">Přechodová simulace</translation>
    </message>
    <message>
        <source>Set Marker</source>
        <translation type="obsolete">Nastavit označkování</translation>
    </message>
    <message>
        <source>Set Marker on Graph</source>
        <translation type="obsolete">Označkování aplikovat na diagram</translation>
    </message>
    <message>
        <source>Sets a marker on a diagram&apos;s graph</source>
        <translation type="obsolete">Aplikuje označkování na jeden graf v diagramu</translation>
    </message>
    <message>
        <source>Set Marker

Sets a marker on a diagram&apos;s graph</source>
        <translation type="obsolete">Aplikovat označkování

aplikuje označkování na jeden graf v diagramu</translation>
    </message>
    <message>
        <source>Translations:</source>
        <translation type="obsolete">Překlady:</translation>
    </message>
    <message>
        <source>German by Stefan Jahn
</source>
        <translation type="obsolete">Německy - Stefan Jahn
</translation>
    </message>
    <message>
        <source>French by Eric Marzolf</source>
        <translation type="obsolete">Francouzky - Eric Marzolf</translation>
    </message>
    <message>
        <source>Polish by Dariusz Pienkowski
</source>
        <translation type="obsolete">Polsky von Dariusz Pienkowski
</translation>
    </message>
    <message>
        <source>Saving will overwrite the old one! Continue?</source>
        <translation type="obsolete">Při uložení bude přepsán původní soubor! Pokračovat?</translation>
    </message>
    <message>
        <source>The file &apos;</source>
        <translation type="obsolete">Soubor &apos;</translation>
    </message>
    <message>
        <source>&apos; already exists!
</source>
        <translation type="obsolete">&apos; již existuje!
</translation>
    </message>
    <message>
        <source>Only the extensions &apos;.sch&apos; and &apos;.dpl&apos;
</source>
        <translation type="obsolete">Pouze přípony souborů &apos;.sch&apos; und &apos;.dpl&apos;
</translation>
    </message>
    <message>
        <source>will appear in the content browser! Continue?</source>
        <translation type="obsolete">se objeví ve výpisu obsahu adresáře! Pokračovat?</translation>
    </message>
    <message>
        <source>Cannot overwrite an open document</source>
        <translation type="obsolete">Otevřený soubor nelze přepsat</translation>
    </message>
    <message>
        <source>The document contains unsaved changes!
</source>
        <translation type="obsolete">Dokument obsahuje neuložené změny!
</translation>
    </message>
    <message>
        <source>Do you want to save the changes before closing?</source>
        <translation type="obsolete">Chcete před ukončením uložit změny?</translation>
    </message>
    <message>
        <source>Schematic (*.sch);; Data Display (*.dpl);;</source>
        <translation type="obsolete">Schéma (*.sch);; Datevé vizualizace (*.dpl);;</translation>
    </message>
    <message>
        <source>Qucs Documents (*.sch *dpl);; Any File (*)</source>
        <translation type="obsolete">Qucs dokumenty (*.sch *dpl);; Všechny soubory (*)</translation>
    </message>
    <message>
        <source>Data Display (*.dpl)</source>
        <translation type="obsolete">Datové vizualizace (*.dpl)</translation>
    </message>
    <message>
        <location line="-46"/>
        <source>Enter a Document Name</source>
        <translation>Zadejte jméno dokumentu</translation>
    </message>
    <message>
        <source>Qucs Documents (*.sch *.dpl);; Any File (*)</source>
        <translation type="obsolete">Qucs Dokumenty (*.sch *.dpl);; Všechny soubory (*)</translation>
    </message>
    <message>
        <source>Schematic (*.sch);;Data Display (*.dpl);;</source>
        <translation type="obsolete">Schaltplan (*.sch);;Datové vizualizace (*.dpl);;</translation>
    </message>
    <message>
        <source>Qucs Documents (*.sch *.dpl);;Any File (*)</source>
        <translation type="obsolete">Qucs dokumenty (*.sch *.dpl);;Všechny soubory (*)</translation>
    </message>
    <message>
        <source>filled Ellipse</source>
        <translation type="obsolete">vyplněná elipsa</translation>
    </message>
    <message>
        <source>filled Rectangle</source>
        <translation type="obsolete">vyplněný obdélník</translation>
    </message>
    <message>
        <source>ac Current Source</source>
        <translation type="obsolete">AC proudový zdroj</translation>
    </message>
    <message>
        <source>Cannot start qucshelp!</source>
        <translation type="obsolete">Naápovědu k programu nelze otevřít!</translation>
    </message>
    <message>
        <source>Cannot start text editor!</source>
        <translation type="obsolete">Textový editor nelze spustit!</translation>
    </message>
    <message>
        <source>This will destroy all the project files permanently ! Continue ?</source>
        <translation type="obsolete">Tímto budou nenávratně smazány všechny soubory z projektu ! Pokračovat ?</translation>
    </message>
    <message>
        <source>At least two elements must be selected !</source>
        <translation type="obsolete">Musí být vybrány minimálně dva elementy !</translation>
    </message>
    <message>
        <source>Schematic</source>
        <translation type="obsolete">Schéma</translation>
    </message>
    <message>
        <source>Data Display</source>
        <translation type="obsolete">Datové vizualizace</translation>
    </message>
    <message>
        <source>Qucs Documents</source>
        <translation type="obsolete">Qucs dokumenty</translation>
    </message>
    <message>
        <source>Any File</source>
        <translation type="obsolete">Všechny soubory</translation>
    </message>
    <message>
        <source>Elliptic Arc</source>
        <translation type="obsolete">Elipsový oblouk</translation>
    </message>
    <message>
        <source>Delete Group</source>
        <translation type="obsolete">Smazat skupinu</translation>
    </message>
    <message>
        <source>Cannot delete the open file: </source>
        <translation type="obsolete">Nelze smazat soubor: </translation>
    </message>
    <message>
        <source>Edit Circuit Symbol</source>
        <translation type="obsolete">Upravit symbol ze schématu</translation>
    </message>
    <message>
        <source>Edit Schematic</source>
        <translation type="obsolete">Upravit schéma</translation>
    </message>
    <message>
        <source>This will delete the files
</source>
        <translation type="obsolete">Tímto budou nenávratně smazány soubory
</translation>
    </message>
    <message>
        <source>permanently! Continue ?</source>
        <translation type="obsolete"> ! Pokračovat?</translation>
    </message>
    <message>
        <source>Edits the symbol for this schematic</source>
        <translation type="obsolete">Upravit symbol v tomto schématu</translation>
    </message>
    <message>
        <source>Edit Circuit Symbol

Edits the symbol for this schematic</source>
        <translation type="obsolete">Upravit symbol ze schématu

Upraví symbol v tomto schématu</translation>
    </message>
    <message>
        <source>Edits the schematic</source>
        <translation type="obsolete">Editace schématu</translation>
    </message>
    <message>
        <source>Edit Schematic

Edits the schematic</source>
        <translation type="obsolete">Upravit schéma

Edtace schématu</translation>
    </message>
    <message>
        <source>Polar-Smith Combi</source>
        <translation type="obsolete">Polární Smithův kombinovaný</translation>
    </message>
    <message>
        <source>Smith-Polar Combi</source>
        <translation type="obsolete">Polární Smithův kombinovaný</translation>
    </message>
    <message>
        <source>Admittance Smith</source>
        <translation type="obsolete">Smithův diagram (admitance)</translation>
    </message>
    <message>
        <source>SPICE netlist</source>
        <translation type="obsolete">SPICE netlist</translation>
    </message>
    <message>
        <source>Edit Properties</source>
        <translation type="obsolete">Změnit vlastnost</translation>
    </message>
    <message>
        <source>Cannot start filter synthesis program!</source>
        <translation type="obsolete">Program pro návrh filtru nelze spustit!</translation>
    </message>
    <message>
        <source>3D-Cartesian</source>
        <translation type="obsolete">3D kartézský</translation>
    </message>
    <message>
        <source>Cannot start line calculation program!</source>
        <translation type="obsolete">Program pro výpočet vedení nelze spustit!</translation>
    </message>
    <message>
        <source>Locus Curve</source>
        <translation type="obsolete">Amplitudově fázová křivka</translation>
    </message>
    <message>
        <source>no warnings</source>
        <translation type="obsolete">žádná varování</translation>
    </message>
    <message>
        <source>file components</source>
        <translation type="obsolete">Části souboru</translation>
    </message>
    <message>
        <location line="-91"/>
        <location line="+147"/>
        <source>File: </source>
        <translation>Soubor: </translation>
    </message>
    <message>
        <location line="-131"/>
        <source>Quit</source>
        <translation>Ukončit</translation>
    </message>
    <message>
        <source>Qucs Editor Version </source>
        <translation type="obsolete">Verze Qucs editoru </translation>
    </message>
    <message>
        <source>
very simple text editor for Qucs
</source>
        <translation type="obsolete">
jednoduchý textový editor pro Qucs
</translation>
    </message>
    <message>
        <source>Copyright (C) 2004 by Michael Margraf
</source>
        <translation type="obsolete">Copyright (C) 2004 by Michael Margraf
</translation>
    </message>
    <message>
        <location line="+63"/>
        <source>Enter a Filename</source>
        <translation>Zadejte jméno souboru</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>Cannot write file: </source>
        <translation>Soubor nelze uložit:</translation>
    </message>
    <message>
        <location line="+39"/>
        <source>Cannot read file: </source>
        <translation>Nelze otevřít soubor:</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Closing document</source>
        <translation>Zavřít dokument</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>The text contains unsaved changes!
</source>
        <translation>Text obsahuje neuložené změny!
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Do you want to save the changes?</source>
        <translation>Chcete uložit změny?</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;Save</source>
        <translation>&amp;Uložit</translation>
    </message>
    <message>
        <location line="-91"/>
        <source>
Very simple text editor for Qucs
</source>
        <translation>
Jednoduchý editor pro Qucs
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2004, 2005 by Michael Margraf
</source>
        <translation>Copyright (C) 2004, 2005 by Michael Margraf
</translation>
    </message>
    <message>
        <location line="+90"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Zrušit</translation>
    </message>
    <message>
        <source>Row: %1  -  Column: %2</source>
        <translation type="obsolete">Zeile: %1  -  Sloupec: %2</translation>
    </message>
    <message>
        <location line="-148"/>
        <location line="+49"/>
        <source>Line: %1  -  Column: %2</source>
        <translation>Řádek: %1  -  Sloupec: %2</translation>
    </message>
</context>
<context>
    <name>QucsFilter</name>
    <message>
        <location filename="../qucs-filter/qucsfilter.cpp" line="+59"/>
        <source>E&amp;xit</source>
        <translation>&amp;Ukončit</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Help...</source>
        <translation>Nápověda...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>&amp;About QucsFilter...</source>
        <translation>&amp;O programu QucsFilter...</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>About Qt...</source>
        <translation>O prostředí Qt...</translation>
    </message>
    <message>
        <location line="-17"/>
        <source>&amp;File</source>
        <translation>&amp;Soubor</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>&amp;Help</source>
        <translation>&amp;Nápověda</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Filter type:</source>
        <translation>Typ filtru:</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Filter class:</source>
        <translation>třída filtru:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Low pass</source>
        <translation>Dolní propust</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>High pass</source>
        <translation>Horní propust</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Order:</source>
        <translation>Řád:</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+302"/>
        <source>Corner frequency:</source>
        <translation>Hraniční frekvence:</translation>
    </message>
    <message>
        <location line="-289"/>
        <source>Stop frequency:</source>
        <translation>Koncová frekvence:</translation>
    </message>
    <message>
        <location line="+26"/>
        <location line="+275"/>
        <source>Pass band ripple:</source>
        <translation>Propustné zvlnění:</translation>
    </message>
    <message>
        <location line="-259"/>
        <source>Impedance:</source>
        <translation>Impedance:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Calculate and put into Clipboard</source>
        <translation>Spočítat a zkopírovat do schránky</translation>
    </message>
    <message>
        <location line="+37"/>
        <source>About...</source>
        <translation>O programu...</translation>
    </message>
    <message>
        <source>QucsFilter Version </source>
        <translation type="obsolete">Verze programu Qucsfilter</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>
Filter synthesis program
</source>
        <translation>
program pro syntézu filtru
</translation>
    </message>
    <message>
        <source>Copyright (C) 2005 by Toyoyuki Ishikawa and Michael Margraf
</source>
        <translation type="obsolete">Copyright (C) 2005 by Toyoyuki Ishikawa und Michael Margraf
</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>About Qt</source>
        <translation>O prostředí Qt</translation>
    </message>
    <message>
        <location line="+13"/>
        <location line="+101"/>
        <location line="+18"/>
        <source>Result:</source>
        <translation>Výsledek:</translation>
    </message>
    <message>
        <location line="-9"/>
        <source>Result: --</source>
        <translation>Výsledek: --</translation>
    </message>
    <message>
        <location line="-8"/>
        <location line="+17"/>
        <source>Successful</source>
        <translation>Úspěšný</translation>
    </message>
    <message>
        <location line="-261"/>
        <source>Band pass</source>
        <translation>Pásmová propust</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Band stop</source>
        <translation>Pásmová blokace</translation>
    </message>
    <message>
        <source>Copyright (C) 2005 by</source>
        <translation type="obsolete">Copyright (C) 2005 von</translation>
    </message>
    <message>
        <location line="+142"/>
        <location line="+1"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="+74"/>
        <source>Stop frequency must be greater than start frequency.</source>
        <translation>Koncová frekvence musí být větší než počáteční frekvence.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Filter order must not be less than two.</source>
        <translation>Řád filtru nesmí být menší než 2.</translation>
    </message>
    <message>
        <location line="+99"/>
        <source>Start frequency:</source>
        <translation>Počáteční frekvence:</translation>
    </message>
    <message>
        <location line="-95"/>
        <source>Bessel filter order must not be greater than 19.</source>
        <translation>Řád Besselova filtru nesmí být větší než 19.</translation>
    </message>
    <message>
        <location line="-188"/>
        <location line="+287"/>
        <source>Stop band frequency:</source>
        <translation>Limitní frekvence:</translation>
    </message>
    <message>
        <location line="-266"/>
        <source>Stop band attenuation:</source>
        <translation>Limitní tlumení:</translation>
    </message>
    <message>
        <location line="+270"/>
        <source>Pass band frequency:</source>
        <translation>Frekvence propustného pásma:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Pass band attenuation:</source>
        <translation>Útlum propustného pásma:</translation>
    </message>
    <message>
        <location line="-214"/>
        <source>Copyright (C) 2005, 2006 by</source>
        <translation>Copyright (C) 2005, 2006 :</translation>
    </message>
</context>
<context>
    <name>QucsHelp</name>
    <message>
        <location filename="../qucs-help/qucshelp.cpp" line="+50"/>
        <source>Qucs Help System</source>
        <translation>Qucs nápověda</translation>
    </message>
    <message>
        <source>Help Index</source>
        <translation type="obsolete">Seznam nápovědy</translation>
    </message>
    <message>
        <source>Close</source>
        <translation type="obsolete">Zavřít</translation>
    </message>
    <message>
        <location line="+29"/>
        <source>&amp;Quit</source>
        <translation>&amp;Ukončit</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;Back</source>
        <translation>&amp;Zpět</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;Forward</source>
        <translation>&amp;Dopředu</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;Home</source>
        <translation>&amp;Domů</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;Previous</source>
        <translation>&amp;Předchozí</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&amp;Next</source>
        <translation>&amp;Následující</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;Table of Contents</source>
        <translation>&amp;Obsah</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Enables/disables the table of contents</source>
        <translation>Aktivovat/deaktivovat tabulku obsahu</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Table of Contents

Enables/disables the table of contents</source>
        <translation>Obsahu

Aktivuje/deaktivuje výpis obsahu</translation>
    </message>
    <message>
        <location line="+40"/>
        <source>&amp;About Qt</source>
        <translation>&amp;O prostředí Qt</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;File</source>
        <translation>&amp;Soubor</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;View</source>
        <translation>&amp;Náhled</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&amp;Help</source>
        <translation>&amp;Nápověda</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Contents</source>
        <translation>Obsah</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Home</source>
        <translation>Domů</translation>
    </message>
</context>
<context>
    <name>QucsInit</name>
    <message>
        <source>New</source>
        <translation type="obsolete">Nové</translation>
    </message>
    <message>
        <source>&amp;New</source>
        <translation type="obsolete">&amp;Nové</translation>
    </message>
    <message>
        <source>Creates a new document</source>
        <translation type="obsolete">Vytvoří nový dokument</translation>
    </message>
    <message>
        <source>New

Creates a new schematic or data display document</source>
        <translation type="obsolete">Nové

Vytvoří nové schéma nebo datovou vizualizaci</translation>
    </message>
    <message>
        <source>Open File</source>
        <translation type="obsolete">Otevřít soubor</translation>
    </message>
    <message>
        <source>&amp;Open...</source>
        <translation type="obsolete">O&amp;tevřít...</translation>
    </message>
    <message>
        <source>Opens an existing document</source>
        <translation type="obsolete">Otevře existující dokument</translation>
    </message>
    <message>
        <source>Open File

Opens an existing document</source>
        <translation type="obsolete">Otevřít soubor

Öffnet ein existierendes Dokument</translation>
    </message>
    <message>
        <source>Save File</source>
        <translation type="obsolete">Uložit soubor</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation type="obsolete">&amp;Uložit</translation>
    </message>
    <message>
        <source>Saves the current document</source>
        <translation type="obsolete">Uloží aktuální dokument</translation>
    </message>
    <message>
        <source>Save File

Saves the current document</source>
        <translation type="obsolete">Uložit soubor

Uloží aktuální dokument</translation>
    </message>
    <message>
        <source>Save File As</source>
        <translation type="obsolete">Uložit soubor jako</translation>
    </message>
    <message>
        <source>Save &amp;as...</source>
        <translation type="obsolete">Uložit &amp;jako...</translation>
    </message>
    <message>
        <source>Saves the current document under a new filename</source>
        <translation type="obsolete">Uloží aktuální dokument pod novým jménem souboru</translation>
    </message>
    <message>
        <source>Save As

Saves the current document under a new filename</source>
        <translation type="obsolete">Uložit jako

Uloží aktuální dokument pod novým jménem</translation>
    </message>
    <message>
        <source>Save All Files</source>
        <translation type="obsolete">Uložit všechny soubory</translation>
    </message>
    <message>
        <source>Save &amp;All</source>
        <translation type="obsolete">&amp;Uložit vše</translation>
    </message>
    <message>
        <source>Saves all open documents</source>
        <translation type="obsolete">Uloží všechny otevřené dokumenty</translation>
    </message>
    <message>
        <source>Save All Files

Saves all open documents</source>
        <translation type="obsolete">Uložit všechny soubory

Uloží všechny otevřené dokumenty</translation>
    </message>
    <message>
        <source>Close File</source>
        <translation type="obsolete">Uzavřít soubor</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">UzaSch&amp;vřít</translation>
    </message>
    <message>
        <source>Closes the current document</source>
        <translation type="obsolete">Zavře aktální dokument</translation>
    </message>
    <message>
        <source>Close File

Closes the current document</source>
        <translation type="obsolete">Zavřít soubor

Zavře aktuální dokument</translation>
    </message>
    <message>
        <source>Settings</source>
        <translation type="obsolete">Nastavení</translation>
    </message>
    <message>
        <source>Settings...</source>
        <translation type="obsolete">Nastavení...</translation>
    </message>
    <message>
        <source>Settings

Sets properties of the file</source>
        <translation type="obsolete">Nastavení

Nastaví vlastnosti souboru</translation>
    </message>
    <message>
        <source>Print File</source>
        <translation type="obsolete">Vytisknout soubor</translation>
    </message>
    <message>
        <source>&amp;Print...</source>
        <translation type="obsolete">&amp;Vytisknout...</translation>
    </message>
    <message>
        <source>Prints the current document</source>
        <translation type="obsolete">Vytiskne aktuální dokument</translation>
    </message>
    <message>
        <source>Print File

Prints the current document</source>
        <translation type="obsolete">Vytisknout soubor

Vytiskne aktuální dokument</translation>
    </message>
    <message>
        <source>Exit</source>
        <translation type="obsolete">Ukončit</translation>
    </message>
    <message>
        <source>E&amp;xit</source>
        <translation type="obsolete">&amp;Ukončit</translation>
    </message>
    <message>
        <source>Ctrl+Q</source>
        <translation type="obsolete">Ctrl+Q</translation>
    </message>
    <message>
        <source>Quits the application</source>
        <translation type="obsolete">Ukončí program Qucs</translation>
    </message>
    <message>
        <source>Exit

Quits the application</source>
        <translation type="obsolete">Ukončit

Ukončí aplikaci</translation>
    </message>
    <message>
        <source>Cut</source>
        <translation type="obsolete">Vyříznout</translation>
    </message>
    <message>
        <source>Cu&amp;t</source>
        <translation type="obsolete">Vyří&amp;znout</translation>
    </message>
    <message>
        <source>Cuts the selected section and puts it to the clipboard</source>
        <translation type="obsolete">Vyřízne vybranou oblast a zkopíruje ji do schránky</translation>
    </message>
    <message>
        <source>Cut

Cuts the selected section and puts it to the clipboard</source>
        <translation type="obsolete">Vyříznout

Vyřízne vybranou oblast a zkopíruje ji do schránky</translation>
    </message>
    <message>
        <source>Copy</source>
        <translation type="obsolete">Zkopírovat</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation type="obsolete">Z&amp;kopírovat</translation>
    </message>
    <message>
        <source>Copies the selected section to the clipboard</source>
        <translation type="obsolete">Zkopíruje vybranou oblast do schránky</translation>
    </message>
    <message>
        <source>Copy

Copies the selected section to the clipboard</source>
        <translation type="obsolete">Zkopírovat

Zkopíruje vybranou oblast do schránky</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation type="obsolete">Vložit</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation type="obsolete">&amp;Vložit</translation>
    </message>
    <message>
        <source>Pastes the clipboard contents to the cursor position</source>
        <translation type="obsolete">Vloží obsah schránky na místo kurzoru</translation>
    </message>
    <message>
        <source>Paste

Pastes the clipboard contents to the cursor position</source>
        <translation type="obsolete">Vložit

Vloží obsah schránky na místo kurzoru</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation type="obsolete">Smazat</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Smazat</translation>
    </message>
    <message>
        <source>Deletes the selected components</source>
        <translation type="obsolete">Smaže vybrané komponenty</translation>
    </message>
    <message>
        <source>Delete

Deletes the selected components</source>
        <translation type="obsolete">Smazat

Smaže vybrané komponenty</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation type="obsolete">Zpět</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation type="obsolete">&amp;Zpět</translation>
    </message>
    <message>
        <source>Undoes the last command</source>
        <translation type="obsolete">Vrátí zpět poslední úkon</translation>
    </message>
    <message>
        <source>Undo

Makes the last action undone</source>
        <translation type="obsolete">Zpět

Vrátí zpět poslední úkon</translation>
    </message>
    <message>
        <source>Redo</source>
        <translation type="obsolete">Opakovat</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation type="obsolete">&amp;Opakovat</translation>
    </message>
    <message>
        <source>Redoes the last command</source>
        <translation type="obsolete">Zopakuje poslední úkon</translation>
    </message>
    <message>
        <source>Redo

Repeats the last action once more</source>
        <translation type="obsolete">Opakovat

Zopakuje poslední úkol</translation>
    </message>
    <message>
        <source>New Project</source>
        <translation type="obsolete">Nový projekt</translation>
    </message>
    <message>
        <source>&amp;New Project...</source>
        <translation type="obsolete">&amp;Nový projekt...</translation>
    </message>
    <message>
        <source>Creates a new project</source>
        <translation type="obsolete">Vytvoří nový projekt</translation>
    </message>
    <message>
        <source>New Project

Creates a new project</source>
        <translation type="obsolete">Nový projekt

Vytvoří nový projekt</translation>
    </message>
    <message>
        <source>Open Project</source>
        <translation type="obsolete">Otevřít projekt</translation>
    </message>
    <message>
        <source>&amp;Open Project...</source>
        <translation type="obsolete">&amp;Otevřít projekt...</translation>
    </message>
    <message>
        <source>Opens a project</source>
        <translation type="obsolete">Otevře projekt</translation>
    </message>
    <message>
        <source>Open Project

Opens an existing project</source>
        <translation type="obsolete">Otevřít projekt

Otevře existující projekt</translation>
    </message>
    <message>
        <source>Delete Project</source>
        <translation type="obsolete">Smazat projekt</translation>
    </message>
    <message>
        <source>&amp;Delete Project...</source>
        <translation type="obsolete">&amp;Smazat projekt...</translation>
    </message>
    <message>
        <source>Deletes a project</source>
        <translation type="obsolete">Smaže projekt</translation>
    </message>
    <message>
        <source>Delete Project

Deletes an existing project</source>
        <translation type="obsolete">Smazat projekt

Smaže existující projekt</translation>
    </message>
    <message>
        <source>View All</source>
        <translation type="obsolete">Zobrazit vše</translation>
    </message>
    <message>
        <source>Views the whole page</source>
        <translation type="obsolete">Zobrazí celou stránku</translation>
    </message>
    <message>
        <source>View All

Shows the whole page content</source>
        <translation type="obsolete">Zobrait vše

Zobrazí celý obsah stránky</translation>
    </message>
    <message>
        <source>View 1:1</source>
        <translation type="obsolete">Zobrazení 1:1</translation>
    </message>
    <message>
        <source>Views without magnification</source>
        <translation type="obsolete">Zobrazit bez zvětšení</translation>
    </message>
    <message>
        <source>View 1:1

Shows the page content without magnification</source>
        <translation type="obsolete">Zobrazení 1:1

Zobrazí obsah stránky bez zvětšení</translation>
    </message>
    <message>
        <source>Zoom in</source>
        <translation type="obsolete">Zvětšit</translation>
    </message>
    <message>
        <source>Zooms into the current view</source>
        <translation type="obsolete">Zvětší aktuální náhled</translation>
    </message>
    <message>
        <source>Zoom in

Zooms the current view</source>
        <translation type="obsolete">Zvětšit

Zvětší aktuální Náhled</translation>
    </message>
    <message>
        <source>Zoom out</source>
        <translation type="obsolete">Zmenšit</translation>
    </message>
    <message>
        <source>Zooms out the current view</source>
        <translation type="obsolete">Zmenší aktuální náhled</translation>
    </message>
    <message>
        <source>Reduce

Zooms out the current view</source>
        <translation type="obsolete">Zmenšit

Zmenší aktuální náhled</translation>
    </message>
    <message>
        <source>Select</source>
        <translation type="obsolete">Vybrat</translation>
    </message>
    <message>
        <source>Select mode</source>
        <translation type="obsolete">Režim výběru</translation>
    </message>
    <message>
        <source>Select

Select mode</source>
        <translation type="obsolete">Vybrat

Režim výběru</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation type="obsolete">Vybrat vše</translation>
    </message>
    <message>
        <source>Selects all elements</source>
        <translation type="obsolete">Vybere všechny elementy</translation>
    </message>
    <message>
        <source>Select All

Selects all elements of the document</source>
        <translation type="obsolete">Vybrat vše

Vybere všechny elementy v dokumentu</translation>
    </message>
    <message>
        <source>Rotate</source>
        <translation type="obsolete">Otočit</translation>
    </message>
    <message>
        <source>Rotates the selected component by 90°</source>
        <translation type="obsolete">Otočí vybrané komponenty o 90°</translation>
    </message>
    <message>
        <source>Rotate

Rotates the selected component by 90° counter-clockwise</source>
        <translation type="obsolete">Otočit

Otočí vybrané komponenty o 90° proti směru hod. ručiček</translation>
    </message>
    <message>
        <source>Mirror about X Axis</source>
        <translation type="obsolete">Zrcadlit kolem x-ové osy</translation>
    </message>
    <message>
        <source>Mirrors the selected item about X axis</source>
        <translation type="obsolete">Zrcadlí výběr na kole x-ové osy</translation>
    </message>
    <message>
        <source>Mirror about X Axis

Mirrors the selected item about X Axis</source>
        <translation type="obsolete">Zrcadlit kolem x-ové osy

Zrcadlí výběr na x-ové ose</translation>
    </message>
    <message>
        <source>Mirror about Y Axis</source>
        <translation type="obsolete">Ozrcadlit podle y-ové osy</translation>
    </message>
    <message>
        <source>Mirrors the selected item about Y axis</source>
        <translation type="obsolete">Ozrcadlí výbraný objekt podle y-ové osy</translation>
    </message>
    <message>
        <source>Mirror about Y Axis

Mirrors the selected item about Y Axis</source>
        <translation type="obsolete">Ozrcadlit podle y-ové osy

Ozrcadlí výbraný objekt podle y-ové osy</translation>
    </message>
    <message>
        <source>Go into Subcircuit</source>
        <translation type="obsolete">Vstoupit do podobvodu</translation>
    </message>
    <message>
        <source>Goes inside subcircuit</source>
        <translation type="obsolete">Vede do podobvodu</translation>
    </message>
    <message>
        <source>Go into Subcircuit

Goes inside the selected subcircuit</source>
        <translation type="obsolete">Jít do podvodu

Vede dovnitř vybraného pobvodu</translation>
    </message>
    <message>
        <source>Pop out</source>
        <translation type="obsolete">Opustit podobvod</translation>
    </message>
    <message>
        <source>Pop outside subcircuit</source>
        <translation type="obsolete">Vystoupí z podobvodu</translation>
    </message>
    <message>
        <source>Pop out

Goes up one hierarchy level, i.e. leaves subcircuit</source>
        <translation type="obsolete">Vystoupit z podobvodu

Opustí obvod a přejde o jednu hierarchickou úroveň výše</translation>
    </message>
    <message>
        <source>Deactivate/Activate</source>
        <translation type="obsolete">Deaktivovat/Aktivovat</translation>
    </message>
    <message>
        <source>Deactivate/Activate the selected item</source>
        <translation type="obsolete">Deaktivovat/Aktivovat vybranou položku</translation>
    </message>
    <message>
        <source>Deactivate/Activate

Deactivate/Activate the selected item</source>
        <translation type="obsolete">Deaktivovat/Aktivovat

Deaktivuje/Aktivuje výbraný objekt</translation>
    </message>
    <message>
        <source>Insert Equation</source>
        <translation type="obsolete">Vložit rovnici</translation>
    </message>
    <message>
        <source>Inserts equation</source>
        <translation type="obsolete">Vloží rovnici</translation>
    </message>
    <message>
        <source>Insert Equation

Inserts a user defined equation</source>
        <translation type="obsolete">Vložit rovnici

Vloží uživatelsky definovanou rovnici</translation>
    </message>
    <message>
        <source>Insert Ground</source>
        <translation type="obsolete">Vložit uzemnění</translation>
    </message>
    <message>
        <source>Inserts ground</source>
        <translation type="obsolete">Vloží symbol uzemnění</translation>
    </message>
    <message>
        <source>Insert Ground

Inserts a ground symbol</source>
        <translation type="obsolete">Vložit uzemnění

Vloží symbol uzemnění</translation>
    </message>
    <message>
        <source>Insert Port</source>
        <translation type="obsolete">Vložit port</translation>
    </message>
    <message>
        <source>Inserts port</source>
        <translation type="obsolete">Vloží port</translation>
    </message>
    <message>
        <source>Insert Port

Inserts a port symbol</source>
        <translation type="obsolete">Vložit port

Vloží symbol portu</translation>
    </message>
    <message>
        <source>Insert Wire</source>
        <translation type="obsolete">Vložit vodič</translation>
    </message>
    <message>
        <source>Wire</source>
        <translation type="obsolete">Vodič</translation>
    </message>
    <message>
        <source>Inserts a wire</source>
        <translation type="obsolete">Vloží vodič</translation>
    </message>
    <message>
        <source>Wire

Inserts a wire</source>
        <translation type="obsolete">Vodič

Vloží vodič</translation>
    </message>
    <message>
        <source>Insert Wire/Pin Label</source>
        <translation type="obsolete">zadat označení vodiče-/uzlu</translation>
    </message>
    <message>
        <source>Wire Label</source>
        <translation type="obsolete">Označení vodiče</translation>
    </message>
    <message>
        <source>Inserts a wire or pin label</source>
        <translation type="obsolete">Vloží označení vodiče nebo uzlu</translation>
    </message>
    <message>
        <source>Wire Label

Inserts a wire or pin label</source>
        <translation type="obsolete">Označení vodiče

Vloží označení vodiče nebo uzlu</translation>
    </message>
    <message>
        <source>Simulate</source>
        <translation type="obsolete">Simulovat</translation>
    </message>
    <message>
        <source>Simulates the current schematic</source>
        <translation type="obsolete">Simulovat aktuální schéma</translation>
    </message>
    <message>
        <source>Simulate

Simulates the current schematic</source>
        <translation type="obsolete">Simulovat

Simuluje aktuální schéma</translation>
    </message>
    <message>
        <source>View Data Display/Schematic</source>
        <translation type="obsolete">Zobrazit data/schéma</translation>
    </message>
    <message>
        <source>Changes to data display or schematic page</source>
        <translation type="obsolete">Přepne na datové zobrazení nebo na editor schématu</translation>
    </message>
    <message>
        <source>View Data Display/Schematic

</source>
        <translation type="obsolete">Zobrazit data/schéma

</translation>
    </message>
    <message>
        <source>Set Marker</source>
        <translation type="obsolete">Nastavit označení</translation>
    </message>
    <message>
        <source>Set Marker on Graph</source>
        <translation type="obsolete">Označení aplikovat na diagram</translation>
    </message>
    <message>
        <source>Sets a marker on a diagram&apos;s graph</source>
        <translation type="obsolete">Aplikuje označení na jeden &apos;graf v diagramu</translation>
    </message>
    <message>
        <source>Set Marker

Sets a marker on a diagram&apos;s graph</source>
        <translation type="obsolete">Aplikovat označení

Aplikuje typ označení na jeden graf v diagramu</translation>
    </message>
    <message>
        <source>Show Last Messages</source>
        <translation type="obsolete">Ukázat poslední hlášky</translation>
    </message>
    <message>
        <source>Shows last simulation messages</source>
        <translation type="obsolete">Ukáže poslední simulační hlášky</translation>
    </message>
    <message>
        <source>Show Last Messages

Shows the messages of the last simulation</source>
        <translation type="obsolete">Ukázat poslední hlášky

Zobrazí hlášky z poslední simulace</translation>
    </message>
    <message>
        <source>Show Last Netlist</source>
        <translation type="obsolete">Ukázat poslední netlist</translation>
    </message>
    <message>
        <source>Shows last simulation netlist</source>
        <translation type="obsolete">Ukáže naposledy odsimulovaný netlist</translation>
    </message>
    <message>
        <source>Show Last Netlist

Shows the netlist of the last simulation</source>
        <translation type="obsolete">Ukázat poslední netlist

Ukáže naposledy odsimulovaný netlist</translation>
    </message>
    <message>
        <source>Toolbar</source>
        <translation type="obsolete">Lišta nástrojů</translation>
    </message>
    <message>
        <source>Tool&amp;bar</source>
        <translation type="obsolete">Lišta &amp;nástrojů</translation>
    </message>
    <message>
        <source>Enables/disables the toolbar</source>
        <translation type="obsolete">Zapne/vypne lištu nástrojů</translation>
    </message>
    <message>
        <source>Toolbar

Enables/disables the toolbar</source>
        <translation type="obsolete">Lišta nástrojů

Zapne/vypne lištu nástrojů</translation>
    </message>
    <message>
        <source>Statusbar</source>
        <translation type="obsolete">Stavový řádek</translation>
    </message>
    <message>
        <source>&amp;Statusbar</source>
        <translation type="obsolete">&amp;Stavový řádek</translation>
    </message>
    <message>
        <source>Enables/disables the statusbar</source>
        <translation type="obsolete">Aktivuje/deaktivuje stavový řádek</translation>
    </message>
    <message>
        <source>Statusbar

Enables/disables the statusbar</source>
        <translation type="obsolete">Stavový řádek

Aktivuje/deaktivuje stavový řádek</translation>
    </message>
    <message>
        <source>Help Index</source>
        <translation type="obsolete">Seznam nápovědy</translation>
    </message>
    <message>
        <source>Help Index...</source>
        <translation type="obsolete">Seznam nápovědy...</translation>
    </message>
    <message>
        <source>Index of Qucs Help</source>
        <translation type="obsolete">Seznam nápovědy ke Qucs</translation>
    </message>
    <message>
        <source>Help Index

Index of intern Qucs help</source>
        <translation type="obsolete">Seznam nápovědy

Seznam interní nápovědi ke Qucs</translation>
    </message>
    <message>
        <source>Getting Started</source>
        <translation type="obsolete">Základní nápověda</translation>
    </message>
    <message>
        <source>Getting Started...</source>
        <translation type="obsolete">Základní nápověda...</translation>
    </message>
    <message>
        <source>Getting Started with Qucs</source>
        <translation type="obsolete">Základní nápověda ke Qucs</translation>
    </message>
    <message>
        <source>Getting Started

Short introduction into Qucs</source>
        <translation type="obsolete">Základní nápověda

Krátký úvod do Qucs</translation>
    </message>
    <message>
        <source>About</source>
        <translation type="obsolete">O programu</translation>
    </message>
    <message>
        <source>&amp;About Qucs...</source>
        <translation type="obsolete">O programu &amp;Qucs...</translation>
    </message>
    <message>
        <source>About the application</source>
        <translation type="obsolete">O aplikaci</translation>
    </message>
    <message>
        <source>About

About the application</source>
        <translation type="obsolete">O programu

O aplikaci</translation>
    </message>
    <message>
        <source>About Qt</source>
        <translation type="obsolete">O prostředí Qt</translation>
    </message>
    <message>
        <source>&amp;About Qt...</source>
        <translation type="obsolete">O prostředí &amp;Qt...</translation>
    </message>
    <message>
        <source>About Qt

About Qt by Trolltech</source>
        <translation type="obsolete">O prostředí Qt

O prostředí Qt od firmy Trolltech</translation>
    </message>
    <message>
        <source>&amp;File</source>
        <translation type="obsolete">&amp;Soubor</translation>
    </message>
    <message>
        <source>&amp;Edit</source>
        <translation type="obsolete">&amp;Upravit</translation>
    </message>
    <message>
        <source>&amp;Insert</source>
        <translation type="obsolete">&amp;Vložit</translation>
    </message>
    <message>
        <source>&amp;Project</source>
        <translation type="obsolete">&amp;Projekt</translation>
    </message>
    <message>
        <source>&amp;Simulation</source>
        <translation type="obsolete">&amp;Simulace</translation>
    </message>
    <message>
        <source>&amp;View</source>
        <translation type="obsolete">&amp;Náhled</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="obsolete">&amp;Nápověda</translation>
    </message>
    <message>
        <source>Ready.</source>
        <translation type="obsolete">Připraveno.</translation>
    </message>
    <message>
        <source>Toggle toolbar...</source>
        <translation type="obsolete">Přepnutí lišty nástrojů...</translation>
    </message>
    <message>
        <source>Toggle statusbar...</source>
        <translation type="obsolete">Přepnutí stavového řádku...</translation>
    </message>
    <message>
        <source>About...</source>
        <translation type="obsolete">O programu...</translation>
    </message>
    <message>
        <source>Qucs Version </source>
        <translation type="obsolete">Qucs Verze </translation>
    </message>
    <message>
        <source>Quite Universal Circuit Simulator</source>
        <translation type="obsolete">Docela univerzální simulátor el. obvodů</translation>
    </message>
    <message>
        <source>Copyright (C) 2003,2004 by Michael Margraf
</source>
        <translation type="obsolete">Copyright (C) 2003,2004 by Michael Margraf
</translation>
    </message>
    <message>
        <source>Simulator by Stefan Jahn</source>
        <translation type="obsolete">Simulator von Stefan Jahn</translation>
    </message>
    <message>
        <source>Special thanks to Jens Flucke</source>
        <translation type="obsolete">Zvláštní poděkování pro Jens Flucke</translation>
    </message>
    <message>
        <source>Translations:</source>
        <translation type="obsolete">Překlady:</translation>
    </message>
    <message>
        <source>German by Stefan Jahn</source>
        <translation type="obsolete">Německy - Stefan Jahn</translation>
    </message>
    <message>
        <source>Polish by Dariusz Pienkowski</source>
        <translation type="obsolete">Polsky - Dariusz Pienkowski</translation>
    </message>
    <message>
        <source>French by Eric Marzolf</source>
        <translation type="obsolete">Franzouzsky - Eric Marzolf</translation>
    </message>
    <message>
        <source>Italian by Giorgio Luparia</source>
        <translation type="obsolete">Italsky - Giorgio Luparia</translation>
    </message>
    <message>
        <source>Application Settings</source>
        <translation type="obsolete">Aplikační nastavení</translation>
    </message>
    <message>
        <source>Application Settings...</source>
        <translation type="obsolete">Aplikační nastavení...</translation>
    </message>
    <message>
        <source>Qucs Settings

Sets properties of the application</source>
        <translation type="obsolete">Qucs nastavení

Změna nastavení programu Qucs</translation>
    </message>
    <message>
        <source>Document Settings</source>
        <translation type="obsolete">Nastavení dokumentu</translation>
    </message>
    <message>
        <source>Document Settings...</source>
        <translation type="obsolete">Nastavení dokumentu...</translation>
    </message>
    <message>
        <source>Align top</source>
        <translation type="obsolete">Zarovnat na vršek</translation>
    </message>
    <message>
        <source>Align top selected elements</source>
        <translation type="obsolete">Zarovnat na vršek vybrané prvky</translation>
    </message>
    <message>
        <source>Align top

Align selected elements to their upper edge</source>
        <translation type="obsolete">Zarovnat na vršek

Zarovná vybrané prvky na jejich horní okraj</translation>
    </message>
    <message>
        <source>Align bottom</source>
        <translation type="obsolete">Zarovnat na spodek</translation>
    </message>
    <message>
        <source>Align bottom selected elements</source>
        <translation type="obsolete">Zarovnat vybrané prvky na spodek</translation>
    </message>
    <message>
        <source>Align bottom

Align selected elements to their lower edge</source>
        <translation type="obsolete">Zarovnat na spodek

Zarovná vybrané prvky na jejich spodní hranu</translation>
    </message>
    <message>
        <source>Align left</source>
        <translation type="obsolete">Zarovnat doleva</translation>
    </message>
    <message>
        <source>Align left selected elements</source>
        <translation type="obsolete">Zarovnat vybrané prvky doleva</translation>
    </message>
    <message>
        <source>Align left

Align selected elements to their left edge</source>
        <translation type="obsolete">zarovnat vlevo

Zarovná vybrané prvky na jejich levý okraj</translation>
    </message>
    <message>
        <source>Align right</source>
        <translation type="obsolete">Nach rechts ausrichten</translation>
    </message>
    <message>
        <source>Align right selected elements</source>
        <translation type="obsolete">Zarovnat vybrané prvky doprava</translation>
    </message>
    <message>
        <source>Align right

Align selected elements to their right edge</source>
        <translation type="obsolete">Zarovnat doprava

Zarovná vybrané elementy na jejich pravý okraj</translation>
    </message>
    <message>
        <source>Align</source>
        <translation type="obsolete">Zarovnat</translation>
    </message>
    <message>
        <source>Distribute horizontally</source>
        <translation type="obsolete">Rozložit vodorovně</translation>
    </message>
    <message>
        <source>Distribute equally horizontally</source>
        <translation type="obsolete">Rozložit rovnoměrně vodorovně</translation>
    </message>
    <message>
        <source>Distribute horizontally

Distribute horizontally selected elements</source>
        <translation type="obsolete">Rozložit svisle

Rozloží vybrané prvky ve svislém směru</translation>
    </message>
    <message>
        <source>Distribute vertically</source>
        <translation type="obsolete">Rozložit svisle</translation>
    </message>
    <message>
        <source>Distribute equally vertically</source>
        <translation type="obsolete">Rozložit rovnoměrně svisle</translation>
    </message>
    <message>
        <source>Distribute vertically

Distribute vertically selected elements</source>
        <translation type="obsolete">Rozložit svisle

Rozloží vybrané prvky svisle</translation>
    </message>
    <message>
        <source>Set on Grid</source>
        <translation type="obsolete">Zachytit na síť</translation>
    </message>
    <message>
        <source>Set on Grid

Sets selected elements on grid</source>
        <translation type="obsolete">Zachytit na síť

Zachytí vybrané prvky na síť bodů</translation>
    </message>
    <message>
        <source>Close Project</source>
        <translation type="obsolete">Zavřít projekt</translation>
    </message>
    <message>
        <source>&amp;Close Project</source>
        <translation type="obsolete">Zavřít &amp;projekt</translation>
    </message>
    <message>
        <source>Close current project</source>
        <translation type="obsolete">Uzavře aktuální projekt</translation>
    </message>
    <message>
        <source>Close Project

Closes the current project</source>
        <translation type="obsolete">Zavřít projekt

Uzavře aktuální projekt</translation>
    </message>
    <message>
        <source>Print Selected Elements</source>
        <translation type="obsolete">Vytisknout výběr</translation>
    </message>
    <message>
        <source>Print Selection...</source>
        <translation type="obsolete">Vytisknout výběr...</translation>
    </message>
    <message>
        <source>Prints Selected Elements</source>
        <translation type="obsolete">Vytiskne vybrané prvky</translation>
    </message>
    <message>
        <source>Print Selected Elements

Prints selected elements of the current document</source>
        <translation type="obsolete">Vytisknout výběr

Vytiskne vybrané prvky v aktuálním dokumentu</translation>
    </message>
    <message>
        <source>Romanian by Radu Circa
</source>
        <translation type="obsolete">Rumunsky - Radu Circa
</translation>
    </message>
    <message>
        <source>Edit Circuit Symbol</source>
        <translation type="obsolete">Upravit symbol schématu</translation>
    </message>
    <message>
        <source>Edits the symbol for this schematic</source>
        <translation type="obsolete">Upraví symbol v tomto schématu</translation>
    </message>
    <message>
        <source>Edit Circuit Symbol

Edits the symbol for this schematic</source>
        <translation type="obsolete">Upravit symbol schématu

Úprava symbolu z tohoto schématu</translation>
    </message>
    <message>
        <source>Portuguese by Luciano Franca
</source>
        <translation type="obsolete">Portugalsky - Luciano Franca
</translation>
    </message>
    <message>
        <source>Spanish by Jose L. Redrejo Rodriguez
</source>
        <translation type="obsolete">Španělsky - Jose L. Redrejo Rodriguez
</translation>
    </message>
    <message>
        <source>Move Component Text</source>
        <translation type="obsolete">Přesunout text komponenty</translation>
    </message>
    <message>
        <source>Move Component Text

Moves the property text of components</source>
        <translation type="obsolete">Přesunout text komponenty

Přesunutí textového popisu vlastností komponenty</translation>
    </message>
    <message>
        <source>French by Vincent Habchi, F5RCS
</source>
        <translation type="obsolete">Franzouzsky - Vincent Habchi, F5RCS
</translation>
    </message>
    <message>
        <source>Japanese by Toyoyuki ISHIKAWA
</source>
        <translation type="obsolete">Japonsky - Toyoyuki ISHIKAWA
</translation>
    </message>
    <message>
        <source>Italian by Giorgio Luparia
</source>
        <translation type="obsolete">Italsky - Giorgio Luparia
</translation>
    </message>
    <message>
        <source>Hungarian by Bus Jozsef</source>
        <translation type="obsolete">Maďarsky - Bus Jozsef</translation>
    </message>
    <message>
        <source>Hungarian by Jozsef Bus</source>
        <translation type="obsolete">Maďarsky - Jozsef Bus</translation>
    </message>
    <message>
        <source>Copyright (C) 2003, 2004, 2005 by Michael Margraf
</source>
        <translation type="obsolete">Copyright (C) 2003, 2004, 2005 by Michael Margraf
</translation>
    </message>
    <message>
        <source>Special thanks to Jens Flucke and Raimund Jacob</source>
        <translation type="obsolete">Zvláštní poděkování si zaslouží Jens Flucke a Raimund Jacob</translation>
    </message>
    <message>
        <source>Japanese by Toyoyuki Ishikawa</source>
        <translation type="obsolete">Japonsky - Toyoyuki Ishikawa</translation>
    </message>
    <message>
        <source>Hebrew by Dotan Nahum</source>
        <translation type="obsolete">Hebrejsky - Dotan Nahum</translation>
    </message>
    <message>
        <source>About Qt...</source>
        <translation type="obsolete">O prostředí Qt...</translation>
    </message>
    <message>
        <source>Text editor</source>
        <translation type="obsolete">Textový editor</translation>
    </message>
    <message>
        <source>Text Editor</source>
        <translation type="obsolete">Textový editor</translation>
    </message>
    <message>
        <source>Starts the Qucs text editor</source>
        <translation type="obsolete">Spustí textový editor Qucs</translation>
    </message>
    <message>
        <source>Text editor

Starts the Qucs text editor</source>
        <translation type="obsolete">Textový editor

Spustí textový editor</translation>
    </message>
    <message>
        <source>Filter synthesis</source>
        <translation type="obsolete">Návrh filtru</translation>
    </message>
    <message>
        <source>Starts QucsFilter</source>
        <translation type="obsolete">Spustí podprogram QucsFilter</translation>
    </message>
    <message>
        <source>Filter synthesis

Starts QucsFilter</source>
        <translation type="obsolete">Návrh filtru

Spustí podprogram QucsFilter</translation>
    </message>
    <message>
        <source>&amp;Tools</source>
        <translation type="obsolete">&amp;Nástroje</translation>
    </message>
    <message>
        <source>QucsFilter by Toyoyuki Ishikawa and Michael Margraf

</source>
        <translation type="obsolete">QucsFilter navrhli Toyoyuki Ishikawa und Michael Margraf

</translation>
    </message>
    <message>
        <source>Swedish by Markus Gothe</source>
        <translation type="obsolete">Švédsky - Markus Gothe</translation>
    </message>
    <message>
        <source>Line calculation</source>
        <translation type="obsolete">Výpočet vedení</translation>
    </message>
    <message>
        <source>Starts QucsTrans</source>
        <translation type="obsolete">Spustí podprogram QucsTrans</translation>
    </message>
    <message>
        <source>Line calculation

Starts transmission line calculator</source>
        <translation type="obsolete">Výpočet vedení

Spustí podprogram pro dimenzování vodivých vedení</translation>
    </message>
    <message>
        <source>Component Library</source>
        <translation type="obsolete">Knihovna komponent</translation>
    </message>
    <message>
        <source>Starts QucsLib</source>
        <translation type="obsolete">Spustí QucsLib</translation>
    </message>
    <message>
        <source>Component Library

Starts component library program</source>
        <translation type="obsolete">Knihovna komponent

Spustí podprogram pro správu komponent v knihovně</translation>
    </message>
    <message>
        <source>no warnings</source>
        <translation type="obsolete">žádná varování</translation>
    </message>
    <message>
        <source>Warnings in last simulation! Press F5</source>
        <translation type="obsolete">V poslední simulaci se objevily varování! Stiskněte F5</translation>
    </message>
    <message>
        <source>Change Property Values</source>
        <translation type="obsolete">Změnit hodnoty vlastností</translation>
    </message>
    <message>
        <source>Change Property Values

Change Property Value of Components</source>
        <translation type="obsolete">Změnit hodnoty vlastností

Změní hodnoty vlastností komponent</translation>
    </message>
    <message>
        <source>Matching Circuit</source>
        <translation type="obsolete">Přizpůsobovací obvod</translation>
    </message>
    <message>
        <source>Creates Matching Circuit</source>
        <translation type="obsolete">Vytvoří přizpůsobovací obvod</translation>
    </message>
    <message>
        <source>Matching Circuit

Dialog for Creating Matching Circuit</source>
        <translation type="obsolete">Přizpůsobovací obvod

Dialog k vytvoření přizpůsobovacího obvodu</translation>
    </message>
    <message>
        <source>Change Property Values...</source>
        <translation type="obsolete">Změnit hodnoty vlastností...</translation>
    </message>
    <message>
        <source>Change Property Values..</source>
        <translation type="obsolete">Změnit hodnoty vlastností..</translation>
    </message>
    <message>
        <source>Calculates DC bias and shows it</source>
        <translation type="obsolete">Vypočítá pracovní DC bod a ukáže ho</translation>
    </message>
    <message>
        <source>Calculate DC bias</source>
        <translation type="obsolete">Vypočítat pracovní DC bod</translation>
    </message>
    <message>
        <source>Calculate DC bias

Calculates DC bias and shows it</source>
        <translation type="obsolete">Výpočet pracovního DC bodu

Vypočítá pracovní DC bod a ukáže ho</translation>
    </message>
    <message>
        <source>Italian by Giorgio Luparia and Claudio Girardi
</source>
        <translation type="obsolete">Italsky - Giorgio Luparia a Claudio Girardi
</translation>
    </message>
    <message>
        <source>Swedish by Markus Gothe and Peter Landgren</source>
        <translation type="obsolete">Švédsky - Markus Gothe a Peter Landgren</translation>
    </message>
    <message>
        <source>Add Files to Project</source>
        <translation type="obsolete">Připojit k projektu soubory</translation>
    </message>
    <message>
        <source>&amp;Add Files to Project...</source>
        <translation type="obsolete">&amp;Připojit k projektu soubory...</translation>
    </message>
    <message>
        <source>Copies files to project directory</source>
        <translation type="obsolete">Zkopírovat soubory do adresáře projektu</translation>
    </message>
    <message>
        <source>Add Files to Project

Copies files to project directory</source>
        <translation type="obsolete">Přidat soubory k projektu

Zkopíruje soubory do adresáře projektu</translation>
    </message>
    <message>
        <source>Copyright (C) 2003, 2004, 2005, 2006 by Michael Margraf
</source>
        <translation type="obsolete">Copyright (C) 2003, 2004, 2005, 2006 - Michael Margraf

</translation>
    </message>
    <message>
        <source>Swedish by Peter Landgren</source>
        <translation type="obsolete">Švédsky - Peter Landgren</translation>
    </message>
    <message>
        <source>Qucs Version</source>
        <translation type="obsolete">Qucs Verze</translation>
    </message>
    <message>
        <source>Copyright (C)</source>
        <translation type="obsolete">Copyright (C)</translation>
    </message>
    <message>
        <source>by Michael Margraf</source>
        <translation type="obsolete">by Michael Margraf</translation>
    </message>
    <message>
        <source>Romanian by Radu Circa</source>
        <translation type="obsolete">Rumunsky - Radu Circa</translation>
    </message>
    <message>
        <source>French by Vincent Habchi, F5RCS</source>
        <translation type="obsolete">Franzouzsky - Vincent Habchi, F5RCS</translation>
    </message>
    <message>
        <source>Portuguese by Luciano Franca</source>
        <translation type="obsolete">Portugalsky - Luciano Franca</translation>
    </message>
    <message>
        <source>Spanish by Jose L. Redrejo Rodriguez</source>
        <translation type="obsolete">Španělsky - Jose L. Redrejo Rodriguez</translation>
    </message>
    <message>
        <source>Italian by Giorgio Luparia and Claudio Girardi</source>
        <translation type="obsolete">Italsky - Giorgio Luparia und Claudio Girardi</translation>
    </message>
    <message>
        <source>Turkish by Onur and Ozgur Cobanoglu</source>
        <translation type="obsolete">Turecky - Onur und Ozgur Cobanoglu</translation>
    </message>
</context>
<context>
    <name>QucsLib</name>
    <message>
        <source>Quit</source>
        <translation type="obsolete">Ukončit</translation>
    </message>
    <message>
        <location filename="../qucs-lib/qucslib.cpp" line="+66"/>
        <source>&amp;Quit</source>
        <translation>&amp;Ukončit</translation>
    </message>
    <message>
        <source>Help</source>
        <translation type="obsolete">Nápověda</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+2"/>
        <source>&amp;Help</source>
        <translation>&amp;Nápověda</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>About</source>
        <translation>O programu</translation>
    </message>
    <message>
        <location line="-23"/>
        <source>&amp;File</source>
        <translation>&amp;Soubor</translation>
    </message>
    <message>
        <location line="+42"/>
        <source>Component Selection</source>
        <translation>Výběr komponent</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Search...</source>
        <translation>Hledat...</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Component</source>
        <translation>Komponenta</translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Copy to clipboard</source>
        <translation>Zkopírovat do schránky</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Show Model</source>
        <translation>Ukázat model</translation>
    </message>
    <message>
        <location line="+69"/>
        <source>About...</source>
        <translation>O programu...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Library Manager for Qucs
</source>
        <translation>Správa knihoven pro Qucs
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2005 by Michael Margraf
</source>
        <translation>Copyright (C) 2005 von Michael Margraf

</translation>
    </message>
    <message>
        <location line="+42"/>
        <source>QucsLib is a program to manage Qucs component libraries. On the left side of the application window the available libraries can be browsed to find the wanted component. By clicking on the component name its description can be seen on the right side. The selected component is transported to the Qucs application by clicking on the button &quot;Copy to Clipboard&quot;. Being back in the schematic window the component can be inserted by pressing CTRL-V  (paste from clipboard).</source>
        <translation>QucsLib je podprogramem pro správu komponent v Qucs knihovnách. Na levé straně aplikačního okna, mohou být prohledávány dostupné knihovny za konkrétní komponentou. Kliknutím na jméno komponenty je ukázán na levé straně její popis. Takto vybranou komponentu lze stiskem tlačítka &quot;Zkopírovat do schránky&quot; uložit do paměti. Po návratu do schématu lze tuto komponentu definitivně umístit stiskem STRG-V (vyjmutím ze schránky).</translation>
    </message>
    <message>
        <location line="+82"/>
        <location line="+3"/>
        <location line="+50"/>
        <location line="+7"/>
        <location line="+9"/>
        <location line="+7"/>
        <location line="+7"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="-83"/>
        <source>Cannot open &quot;%1&quot;.</source>
        <translation>Soubor &quot;%1&quot; nelze otevřít.</translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+50"/>
        <location line="+7"/>
        <location line="+9"/>
        <location line="+7"/>
        <location line="+7"/>
        <source>Library is corrupt.</source>
        <translation>Soubor s knihovnou je poškozen.</translation>
    </message>
    <message>
        <location line="-122"/>
        <source>Search result</source>
        <translation>Výsledek hledání</translation>
    </message>
    <message>
        <location line="+69"/>
        <source>Result</source>
        <translation>Výsledek</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>No appropriate component found.</source>
        <translation>Nenalezeny žádné odpovídající komponenty.</translation>
    </message>
    <message>
        <location line="-298"/>
        <source>Manage User &amp;Libraries...</source>
        <translation>Upravit uživatelské &amp;knihovny...</translation>
    </message>
    <message>
        <location line="+194"/>
        <source>A more comfortable way: The component can also be placed onto the schematic by using Drag n&apos;Drop.</source>
        <translation>Mnohem pohodlnější způsob. Komponenta může být umístěna do schématu pomocí funkce Drag n&apos;Drop.</translation>
    </message>
    <message>
        <location line="-10"/>
        <source>QucsLib Help</source>
        <translation>QucsLib nápověda</translation>
    </message>
    <message>
        <location line="+32"/>
        <source>Model</source>
        <translation></translation>
    </message>
    <message>
        <location line="+79"/>
        <source>Search Library Component</source>
        <translation>Vyhledat komponentu z knihovny</translation>
    </message>
</context>
<context>
    <name>QucsSettingsDialog</name>
    <message>
        <location filename="dialogs/qucssettingsdialog.cpp" line="+49"/>
        <source>Edit Qucs Properties</source>
        <translation>Upravit vlastnosti programu Qucs</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Document Background Color:</source>
        <translation>Barva pozadí schématu:</translation>
    </message>
    <message>
        <source>Simulation</source>
        <translation type="obsolete">Simulace</translation>
    </message>
    <message>
        <location line="+262"/>
        <source>OK</source>
        <translation>Hotovo</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Apply</source>
        <translation>Převzít</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <source>Design</source>
        <translation type="obsolete">Náhled</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Default Values</source>
        <translation>Přednastavení</translation>
    </message>
    <message>
        <location line="-276"/>
        <source>Font (set after reload):</source>
        <translation>Typ písma (aktivováno až po restartu):</translation>
    </message>
    <message>
        <location line="+36"/>
        <source>maximum undo operations:</source>
        <translation>maximální počet undo operací:</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>text editor:</source>
        <translation>Textový editor:</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Settings</source>
        <translation>Nastavení</translation>
    </message>
    <message>
        <location line="+85"/>
        <source>Suffix</source>
        <translation>Koncovka souboru</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Program</source>
        <translation>Program</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Suffix:</source>
        <translation>Koncovka souboru:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Program:</source>
        <translation>Program:</translation>
    </message>
    <message>
        <source>Add</source>
        <translation type="obsolete">Přidat</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Remove</source>
        <translation>Smazat</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>File Types</source>
        <translation>Typy souborů</translation>
    </message>
    <message>
        <location line="-56"/>
        <source>Register filename extensions here in order to
open files with an appropriate program.</source>
        <translation>Registrace koncovek souborů, tak aby bylo možno
soubory automaticky otevírat s odpovídajícími programy.</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>Set</source>
        <translation>Nastavit</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Edit the standard paths and external applications</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Qucs Home:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+62"/>
        <source>Locations</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+73"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This suffix is already registered!</source>
        <translation>Tato koncovka je již registrovaná!</translation>
    </message>
    <message>
        <location line="-321"/>
        <source>Language (set after reload):</source>
        <translation>Jazyk (bude nastaveno po restartu):</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>system language</source>
        <translation>Jazyk systému</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>English</source>
        <translation>Angličtina</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>German</source>
        <translation>Němčina</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>French</source>
        <translation>Francouzština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Spanish</source>
        <translation>Španělština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Italian</source>
        <translation>Italština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Polish</source>
        <translation>Polština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Romanian</source>
        <translation>Rumunština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Japanese</source>
        <translation>Japonština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Swedish</source>
        <translation>Švédština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hungarian</source>
        <translation>Maďarština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Hebrew</source>
        <translation>Hebrejština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Portuguese-BR</source>
        <oldsource>Portuguese</oldsource>
        <translation type="unfinished">Portugalština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Portuguese-PT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Turkish</source>
        <translation>Turečtina</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ukrainian</source>
        <translation>Ukrajinština</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Russian</source>
        <translation>Ruština</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Set to qucs, qucsedit or the path to your favorite text editor.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Load documents from future versions </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+12"/>
        <source>Colors for Syntax Highlighting:</source>
        <translation>Barvy pro zvýraznění syntaxe:</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Comment</source>
        <translation>Komentář</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>String</source>
        <translation>Řetězec</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Integer Number</source>
        <translation>Integer číslo</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Real Number</source>
        <translation>Reálné číslo</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Character</source>
        <translation>Znak</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Data Type</source>
        <translation>Datový typ</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Attribute</source>
        <translation>Atribut</translation>
    </message>
    <message>
        <location line="+101"/>
        <source>AdmsXml Path:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>ASCO Path:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Octave Path:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Subcircuit Search Path List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+409"/>
        <source>Select the admsXml bin directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Select the ASCO bin directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Select the octave bin directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-27"/>
        <source>Select the home directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+41"/>
        <location line="+19"/>
        <source>Select a directory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-663"/>
        <source>Czech</source>
        <translation>Česky</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Catalan</source>
        <translation>Katalánsky</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>start wiring when clicking open node:</source>
        <translation>spustit propojení vodiči po kliknutí na &quot;otevřít uzel&quot;:</translation>
    </message>
    <message>
        <location line="-15"/>
        <source>Arabic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Kazakh</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+75"/>
        <source>Directive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Task</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Source Code Editor</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QucsTranscalc</name>
    <message>
        <source>Load</source>
        <translation type="obsolete">Otevřít</translation>
    </message>
    <message>
        <location filename="../qucs-transcalc/qucstrans.cpp" line="+264"/>
        <source>&amp;Load</source>
        <translation>&amp;Otevřít</translation>
    </message>
    <message>
        <source>Save</source>
        <translation type="obsolete">Uložit</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&amp;Save</source>
        <translation>&amp;Uložit</translation>
    </message>
    <message>
        <source>Options</source>
        <translation type="obsolete">Možnosti</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&amp;Options</source>
        <translation>&amp;Možnosti</translation>
    </message>
    <message>
        <source>Quit</source>
        <translation type="obsolete">Ukončit</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&amp;Quit</source>
        <translation>&amp;Ukončit</translation>
    </message>
    <message>
        <source>Copy to Clipboard</source>
        <translation type="obsolete">Zkopírovat do schránky</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>&amp;Copy to Clipboard</source>
        <translation>Zkopírovat do &amp;schránky</translation>
    </message>
    <message>
        <location line="+92"/>
        <source>Analyze</source>
        <translation>Analýza</translation>
    </message>
    <message>
        <location line="-87"/>
        <source>&amp;Analyze</source>
        <translation>&amp;Analýza</translation>
    </message>
    <message>
        <location line="+92"/>
        <source>Synthesize</source>
        <translation>Syntéza</translation>
    </message>
    <message>
        <location line="-87"/>
        <source>&amp;Synthesize</source>
        <translation>&amp;Syntéza</translation>
    </message>
    <message>
        <source>Help</source>
        <translation type="obsolete">Nápověda</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+1"/>
        <source>&amp;Help</source>
        <translation>&amp;Nápověda</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>About</source>
        <translation>O prgramu</translation>
    </message>
    <message>
        <location line="-51"/>
        <source>&amp;File</source>
        <translation>&amp;Soubor</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>&amp;Execute</source>
        <translation>&amp;Spustit</translation>
    </message>
    <message>
        <location line="+39"/>
        <source>Transmission Line Type</source>
        <translation>Typ přenosového vedení</translation>
    </message>
    <message>
        <source>Microstrip</source>
        <translation type="obsolete">Mikropáskové vedení</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Rectangular Waveguide</source>
        <translation>Obdélníkový vodič</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Coaxial Line</source>
        <translation>Koaxiální kabel</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Coupled Microstrip</source>
        <translation>Svázané mikropáskové vodiče</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>Substrate Parameters</source>
        <translation>Parametry substrátu</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Component Parameters</source>
        <translation>Parametry komponenty</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Physical Parameters</source>
        <translation>Physikální parametry</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Derive Electrical Parameters</source>
        <translation>Výpočet elektrických parametrů</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Compute Physical Parameters</source>
        <translation>Výpočet fyzikálních parameterů</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Electrical Parameters</source>
        <translation>Elektrické parametry</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Calculated Results</source>
        <translation>Vypočítané výsledky</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+569"/>
        <location line="+151"/>
        <location line="+19"/>
        <source>Ready.</source>
        <translation>Připraven.</translation>
    </message>
    <message>
        <location line="-689"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <source>Conductor Losses</source>
        <translation>Ohmické ztráty</translation>
    </message>
    <message>
        <location line="-23"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <source>Dielectric Losses</source>
        <translation>Dielektrické ztráty</translation>
    </message>
    <message>
        <location line="-23"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+22"/>
        <source>Skin Depth</source>
        <translation>Hloubka průniku</translation>
    </message>
    <message>
        <location line="-16"/>
        <location line="+6"/>
        <source>TE-Modes</source>
        <translation>TE-režimy</translation>
    </message>
    <message>
        <location line="-5"/>
        <location line="+6"/>
        <source>TM-Modes</source>
        <translation>TM-režimy</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Conductor Losses Even</source>
        <translation>Ohmické ztráty souhlasné</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Conductor Losses Odd</source>
        <translation>Ohmické ztráty nesouhlasné</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Dielectric Losses Even</source>
        <translation>Dielektrické ztráty souhlasné</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Dielectric Losses Odd</source>
        <translation>Dielektrické ztráty nesouhlasné</translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+15"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <source>Relative Permittivity</source>
        <translation>Relativní permitivita</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+41"/>
        <location line="+13"/>
        <location line="+12"/>
        <source>Relative Permeability</source>
        <translation>Relativní Permeabilita</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+14"/>
        <location line="+13"/>
        <location line="+39"/>
        <source>Height of Substrate</source>
        <translation>Výška substrátu</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+66"/>
        <source>Height of Box Top</source>
        <translation>Výška pokrytí</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+40"/>
        <source>Strip Thickness</source>
        <translation>Tloušťka pásku</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+40"/>
        <source>Strip Conductivity</source>
        <translation>Vodivost pásku</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+12"/>
        <location line="+16"/>
        <source>Dielectric Loss Tangent</source>
        <translation>Dielektrický ztrátový úhel</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+66"/>
        <source>Conductor Roughness</source>
        <translation>Drsnost povrchu</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+12"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+16"/>
        <source>Frequency</source>
        <translation>Frekvence</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+12"/>
        <location line="+13"/>
        <location line="+41"/>
        <source>Line Width</source>
        <translation>Šířka vedení</translation>
    </message>
    <message>
        <location line="-65"/>
        <location line="+13"/>
        <location line="+13"/>
        <source>Line Length</source>
        <translation>Délka vedení</translation>
    </message>
    <message>
        <location line="-25"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <source>Characteristic Impedance</source>
        <translation>Charakteristická impedance</translation>
    </message>
    <message>
        <location line="-50"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+13"/>
        <location line="+12"/>
        <location line="+17"/>
        <source>Electrical Length</source>
        <translation>Elektrická délka</translation>
    </message>
    <message>
        <location line="-37"/>
        <location line="+14"/>
        <source>Conductivity of Metal</source>
        <translation>Vodivost kovu</translation>
    </message>
    <message>
        <location line="-12"/>
        <source>Magnetic Loss Tangent</source>
        <translation>Magnetický ztrátový úhel</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Width of Waveguide</source>
        <translation>Šířka vlnového vodiče</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Height of Waveguide</source>
        <translation>Výška vlnového vodiče</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Waveguide Length</source>
        <translation>Délka vlnového vodiče</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Inner Diameter</source>
        <translation>Vnitřní průměr</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Outer Diameter</source>
        <translation>Vnější průměr</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+16"/>
        <source>Length</source>
        <translation>Délka</translation>
    </message>
    <message>
        <location line="-55"/>
        <location line="+13"/>
        <location line="+41"/>
        <source>Gap Width</source>
        <translation>Šířka mezery</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Even-Mode Impedance</source>
        <translation>Souhlasná impedance</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Odd-Mode Impedance</source>
        <translation>Nesouhlasná impedance</translation>
    </message>
    <message>
        <location line="+138"/>
        <source>Selected for Calculation</source>
        <translation>Vybráno pro výpočet</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Check item for Calculation</source>
        <translation>Vybrat položku k výpočtu</translation>
    </message>
    <message>
        <location line="+217"/>
        <source>About...</source>
        <translation>O programu...</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Transmission Line Calculator for Qucs
</source>
        <translation>Výpočet vedení pro Qucs
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2001 by Gopal Narayanan
</source>
        <translation>Copyright (C) 2001 - Gopal Narayanan
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2002 by Claudio Girardi
</source>
        <translation>Copyright (C) 2002 - Claudio Girardi
</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Copyright (C) 2005 by Stefan Jahn
</source>
        <translation>Copyright (C) 2005 - Stefan Jahn
</translation>
    </message>
    <message>
        <location line="+42"/>
        <location line="+7"/>
        <source>Values are consistent.</source>
        <translation>Hodnoty jsou konzistentní.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Values are inconsistent.</source>
        <translation>Hodnoty jsou nekonzistentní.</translation>
    </message>
    <message>
        <location line="+118"/>
        <source>Loading file...</source>
        <translation>Soubor je otevírán...</translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+19"/>
        <source>Transcalc File</source>
        <translation>Transcalc soubor</translation>
    </message>
    <message>
        <location line="-21"/>
        <location line="+19"/>
        <source>Enter a Filename</source>
        <translation>Zadat jméno souboru</translation>
    </message>
    <message>
        <location line="-13"/>
        <location line="+19"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <location line="-18"/>
        <source>Cannot load file:</source>
        <translation>Soubor nelze otevřít:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Loading aborted.</source>
        <translation>Otevírání bylo přerušeno.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Saving file...</source>
        <translation>Uložit soubor...</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Cannot save file:</source>
        <translation>Nelze uložit soubor :</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Saving aborted.</source>
        <translation>Ukládání bylo přerušeno.</translation>
    </message>
    <message>
        <location line="+298"/>
        <source>Schematic copied into clipboard.</source>
        <translation>Schéma bylo zkopírováno do schránky.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Transmission line type not available.</source>
        <translation>Tento typ vedení není k dispozici.</translation>
    </message>
    <message>
        <location line="-988"/>
        <location line="+6"/>
        <location line="+6"/>
        <location line="+6"/>
        <source>ErEff</source>
        <translation>Efektivní Er</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>ErEff Even</source>
        <translation>Efektivní Er souhlasné</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>ErEff Odd</source>
        <translation>Efektivní Er nesouhlasné</translation>
    </message>
    <message>
        <location line="-156"/>
        <source>Microstrip Line</source>
        <translation type="unfinished">Mikropáskové vedení</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Coplanar Waveguide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Grounded Coplanar</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+608"/>
        <source>Copyright (C) 2008 by Michael Margraf
</source>
        <translation type="unfinished">Copyright (C) 2008 von Michael Margraf

</translation>
    </message>
</context>
<context>
    <name>QucsView</name>
    <message>
        <source>Insert Nodename</source>
        <translation type="obsolete">Vložit jméno uzlu</translation>
    </message>
    <message>
        <source>Enter the label:</source>
        <translation type="obsolete">Zadat označení:</translation>
    </message>
    <message>
        <source>Info</source>
        <translation type="obsolete">Informace</translation>
    </message>
    <message>
        <source>The ground potential cannot be labeled!</source>
        <translation type="obsolete">Uzemnění nelze označit!</translation>
    </message>
    <message>
        <source>Edit Properties</source>
        <translation type="obsolete">Upravit vlastnosti</translation>
    </message>
    <message>
        <source>power matching</source>
        <translation type="obsolete">Výkonové přizpůsobení</translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="obsolete">Chyba</translation>
    </message>
    <message>
        <source>noise matching</source>
        <translation type="obsolete">Přizpůsobení rušení</translation>
    </message>
    <message>
        <source>2-port matching</source>
        <translation type="obsolete">2-port přizpůsobení</translation>
    </message>
    <message>
        <source>Could not load S[1,1].</source>
        <translation type="obsolete">Datovou sadu S[1,1] nelze otevřít.</translation>
    </message>
    <message>
        <source>Could not load S[1,2].</source>
        <translation type="obsolete">Datovou sadu S[1,2] nelze otevřít.</translation>
    </message>
    <message>
        <source>Could not load S[2,1].</source>
        <translation type="obsolete">Datovou sadu S[2,1] nelze otevřít.</translation>
    </message>
    <message>
        <source>Could not load S[2,2].</source>
        <translation type="obsolete">Datovou sadu S[2,2] nelze otevřít.</translation>
    </message>
    <message>
        <source>Wrong dependency!</source>
        <translation type="obsolete">Chybná závislost!</translation>
    </message>
</context>
<context>
    <name>SaveDialog</name>
    <message>
        <location filename="dialogs/savedialog.cpp" line="+58"/>
        <source>Modified Files</source>
        <translation>Upravené soubory</translation>
    </message>
    <message>
        <location line="+34"/>
        <source>Untitled</source>
        <translation>Nepojmenované</translation>
    </message>
    <message>
        <location line="-56"/>
        <source>Save the modified files</source>
        <translation>Uložit upravené soubory</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Select files to be saved</source>
        <translation>Vybrat soubory pro uložení</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Abort Closing</source>
        <translation>Ukončit zavírání</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Save Selected</source>
        <translation>Uložit vybrané</translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Don&apos;t Save</source>
        <translation>Neukládat</translation>
    </message>
</context>
<context>
    <name>Schematic</name>
    <message>
        <location filename="schematic.cpp" line="+9"/>
        <source>Title</source>
        <translation>Název</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Drawn By:</source>
        <translation>Nakresleno:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Date:</source>
        <translation>Datum:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Revision:</source>
        <translation>Verze:</translation>
    </message>
    <message>
        <location filename="schematic_file.cpp" line="+266"/>
        <location line="+22"/>
        <source>Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-21"/>
        <source>Program admsXml not found: %1

Set the admsXml location on the application settings.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Status</source>
        <translation type="unfinished">status</translation>
    </message>
    <message>
        <location line="+928"/>
        <source>ERROR: Cannot create library file &quot;%s&quot;.</source>
        <translation>CHYBA: Nelze vytvořit knihovnu v souboru &quot;%s&quot;.</translation>
    </message>
    <message>
        <location filename="schematic.cpp" line="+1299"/>
        <source>generic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-1212"/>
        <source>Edit Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edits the Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edit Text

Edits the text file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Edit Schematic</source>
        <translation type="unfinished">Upravit schéma</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edits the schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edit Schematic

Edits the schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Edit Circuit Symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edits the symbol for this schematic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Edit Circuit Symbol

Edits the symbol for this schematic</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SearchDialog</name>
    <message>
        <location filename="../qucs-lib/searchdialog.cpp" line="+49"/>
        <source>The search result contains all components whose
name contains the search string. All libraries
are included in the search.</source>
        <translation>Výsledek hledání obsahuje všechny komponenty, v jejichž
jméně je hledaný řetězec. Do hledání budou zahrnuty všechny knihovny.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Search string:</source>
        <translation>Hledaný pojem:</translation>
    </message>
    <message>
        <location filename="dialogs/searchdialog.cpp" line="+71"/>
        <location filename="../qucs-lib/searchdialog.cpp" line="+11"/>
        <source>Search</source>
        <translation>Hledat</translation>
    </message>
    <message>
        <location filename="../qucs-lib/searchdialog.cpp" line="+2"/>
        <source>Close</source>
        <translation>Zavřít</translation>
    </message>
    <message>
        <location line="+89"/>
        <location line="+1"/>
        <source>Search result</source>
        <translation>Výsledek hledání</translation>
    </message>
    <message>
        <location filename="dialogs/searchdialog.cpp" line="-30"/>
        <source>Text to search for</source>
        <translation>Text k nalezení</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Text to replace with</source>
        <translation>Text k nahrazení za</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Ask before replacing</source>
        <translation>Dotázat se před záměnou</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>From cursor position</source>
        <translation>Od místa kurzoru</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Case sensitive</source>
        <translation>S rozlišením velikosti písmen </translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Whole words only</source>
        <translation>Pouze celá slova</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Search backwards</source>
        <translation>Hledat zpětně</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Replace Text</source>
        <translation>Zaměnit text</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Search Text</source>
        <translation>Hledat text</translation>
    </message>
    <message>
        <location line="+51"/>
        <location line="+23"/>
        <source>Replace...</source>
        <translation>Zaměnit...</translation>
    </message>
    <message>
        <location line="-23"/>
        <source>Replace occurrence ?</source>
        <translation>Zaměnit výskyt ?</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Search...</source>
        <translation>Hledat...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Search string not found!</source>
        <translation>Hledaný řetězec nebyl nalezen!</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Replaced %1 occurrences!</source>
        <translation>Zaměněno %1 výskytů!</translation>
    </message>
</context>
<context>
    <name>SettingsDialog</name>
    <message>
        <location filename="dialogs/settingsdialog.cpp" line="+61"/>
        <source>Data Display:</source>
        <translation>Datové vizualizace:</translation>
    </message>
    <message>
        <location line="-5"/>
        <source>Data Set:</source>
        <translation>Datová sada:</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>open data display after simulation</source>
        <translation>Po simulaci otevřít datovou vizualizaci</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>show Grid</source>
        <translation>Zobrazit bodovou síť</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>horizontal Grid:</source>
        <translation>vodorovná bodová rozteč:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>vertical Grid:</source>
        <translation>svislá bodová síť:</translation>
    </message>
    <message>
        <location line="+45"/>
        <source>OK</source>
        <translation>Hotovo</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Apply</source>
        <translation>Převzít</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="-101"/>
        <source>Edit File Properties</source>
        <translation>Upravit vlastnosti souboru</translation>
    </message>
    <message>
        <location line="+34"/>
        <source>Simulation</source>
        <translation>Simulace</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Grid</source>
        <translation>Bodová síť</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>no Frame</source>
        <translation>bez rámečku</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A5 landscape</source>
        <translation></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A5 portrait</source>
        <translation></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A4 landscape</source>
        <translation></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A4 portrait</source>
        <translation></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A3 landscape</source>
        <translation></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>DIN A3 portrait</source>
        <translation></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Frame</source>
        <translation>Rámec</translation>
    </message>
    <message>
        <location line="-17"/>
        <source>Letter landscape</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Letter portrait</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-45"/>
        <source>Octave Script:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>run script after simulation</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SimMessage</name>
    <message>
        <location filename="dialogs/simmessage.cpp" line="+52"/>
        <source>Qucs Simulation Messages</source>
        <translation>Qucs simulační hlášky</translation>
    </message>
    <message>
        <location line="+21"/>
        <location line="+18"/>
        <source>Progress:</source>
        <translation>Již hotovo:</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Errors and Warnings:</source>
        <translation>Chyby a varování:</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Goto display page</source>
        <translation>Přejít k zobrazení stránky</translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+15"/>
        <source>Abort simulation</source>
        <translation>Přerušit simulaci</translation>
    </message>
    <message>
        <location line="+546"/>
        <source>Close window</source>
        <translation>Zavřít okno</translation>
    </message>
    <message>
        <source>Starting new simulation on </source>
        <translation type="obsolete">Spustit novou simulaci v </translation>
    </message>
    <message>
        <source> at </source>
        <translation type="obsolete"> v </translation>
    </message>
    <message>
        <source>creating netlist ....</source>
        <translation type="obsolete">Vytváření netlistu... </translation>
    </message>
    <message>
        <source>ERROR: Cannot create netlist file!
Aborted.</source>
        <translation type="obsolete">CHYBA: Nelze vytvořit soubor s netlistem!
Abgebrochen.</translation>
    </message>
    <message>
        <source>done.
</source>
        <translation type="obsolete">hotovo.
</translation>
    </message>
    <message>
        <location line="-534"/>
        <source>ERROR: Simulator is still running!</source>
        <translation>CHYBA: Simulátor stále běží!</translation>
    </message>
    <message>
        <location line="+443"/>
        <source>ERROR: Cannot start simulator!</source>
        <translation>CHYBA: Simulátor nelze spustit!</translation>
    </message>
    <message>
        <source>
Simulation ended on </source>
        <translation type="obsolete">
Simulace skončila v </translation>
    </message>
    <message>
        <source>Ready.
</source>
        <translation type="obsolete">Hotovo.
</translation>
    </message>
    <message>
        <source>
Errors occured during simulation on </source>
        <translation type="obsolete">
Během simulace se vyskytly chyby v </translation>
    </message>
    <message>
        <source>Aborted.
</source>
        <translation type="obsolete">Přerušeno.
</translation>
    </message>
    <message>
        <source>Output:
----------

</source>
        <translation type="obsolete">Výstup:
----------

</translation>
    </message>
    <message>
        <source>


Errors:
--------

</source>
        <translation type="obsolete">


Chyby:
--------

</translation>
    </message>
    <message>
        <location line="-434"/>
        <source>ERROR: Cannot write netlist file!</source>
        <translation>CHYBA: Soubor s netlistem nelze uložit!</translation>
    </message>
    <message>
        <location line="+94"/>
        <source>ERROR: Cannot start QucsConv!</source>
        <translation>CHYBA: Program QucsConv nelze spustit!</translation>
    </message>
    <message>
        <source>ERROR: No time for simulation specified!</source>
        <translation type="obsolete">CHYBA: Pro simulaci nebyl zadán žádný čas!</translation>
    </message>
    <message>
        <source>ERROR: Forgotten the digital simulation component?</source>
        <translation type="obsolete">CHYBA: Nebyla vynechána komponenta digitální simulace?</translation>
    </message>
    <message>
        <location line="-97"/>
        <source>creating netlist... </source>
        <translation>vytváření netlistu... </translation>
    </message>
    <message>
        <location line="+77"/>
        <source>ERROR: Cannot open SPICE file &quot;%1&quot;.</source>
        <translation>CHYBA: Nelze otevřít SPICE soubor &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="-92"/>
        <source>Starting new simulation on %1 at %2</source>
        <translation>Spustit novou simulaci na %1 v %2</translation>
    </message>
    <message>
        <location line="+215"/>
        <location line="+101"/>
        <source>done.</source>
        <translation>hotovo.</translation>
    </message>
    <message>
        <location line="+20"/>
        <location line="+24"/>
        <source>Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-24"/>
        <location line="+24"/>
        <source>Cannot read netlist!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+81"/>
        <source>ERROR: Program not found: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+110"/>
        <source>Simulation ended on %1 at %2</source>
        <translation>Simulace ukončena na %1 v %2</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Ready.</source>
        <translation>Připraveno.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Errors occurred during simulation on %1 at %2</source>
        <translation>Chyby vyskytnuvší se během simulace na %1 v %2</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Aborted.</source>
        <translation>Přerušeno.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Output:
-------</source>
        <translation>Výstup:
------</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Errors:
-------</source>
        <translation>Chyby:
-------</translation>
    </message>
    <message>
        <location line="-315"/>
        <location line="+7"/>
        <source>ERROR: Cannot create VHDL directory &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+8"/>
        <source>ERROR: Cannot create &quot;%1&quot;!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-240"/>
        <source>ERROR: Cannot simulate a text file!</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SpiceDialog</name>
    <message>
        <source>Edit Spice Component Properties</source>
        <translation type="obsolete">Upravit vlastnosti SPICE komponenty</translation>
    </message>
    <message>
        <location filename="components/spicedialog.cpp" line="+66"/>
        <source>Name:</source>
        <translation>Jméno:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>File:</source>
        <translation>Soubor:</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Browse</source>
        <translation>Projít</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Edit</source>
        <translation>Upravit</translation>
    </message>
    <message>
        <source>Spice net nodes:</source>
        <translation type="obsolete">SPICE síťový uzel:</translation>
    </message>
    <message>
        <location line="+35"/>
        <source>Add &gt;&gt;</source>
        <translation>Přidat &gt;&gt;</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&lt;&lt; Remove</source>
        <translation>&lt;&lt; Odstranit</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Component ports:</source>
        <translation>Porty komponenty:</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Apply</source>
        <translation>Převzít</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation>Zrušit</translation>
    </message>
    <message>
        <location line="+129"/>
        <source>All Files</source>
        <translation>Všechny soubory</translation>
    </message>
    <message>
        <location line="-3"/>
        <source>Select a file</source>
        <translation>Vybrat soubor</translation>
    </message>
    <message>
        <location line="-178"/>
        <source>show file name in schematic</source>
        <translation>Zobrazit jméno souboru ve schématu</translation>
    </message>
    <message>
        <location line="+279"/>
        <location line="+10"/>
        <location line="+48"/>
        <source>Error</source>
        <translation>Chyba</translation>
    </message>
    <message>
        <source>Cannot execute</source>
        <translation type="obsolete">Nelze spustit</translation>
    </message>
    <message>
        <location line="-71"/>
        <location line="+59"/>
        <source>Info</source>
        <translation>Informace</translation>
    </message>
    <message>
        <source>Converting ...</source>
        <translation type="obsolete">Konverze ...</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>QucsConv Error</source>
        <translation>QucsConv chyba</translation>
    </message>
    <message>
        <location line="-167"/>
        <source>SPICE netlist</source>
        <translation>SPICE netlist</translation>
    </message>
    <message>
        <location line="-217"/>
        <source>Edit SPICE Component Properties</source>
        <translation>Upravit vlastnosti SPICE komponenty</translation>
    </message>
    <message>
        <location line="+59"/>
        <source>SPICE net nodes:</source>
        <translation>SPICE síťové uzly:</translation>
    </message>
    <message>
        <location line="-19"/>
        <source>include SPICE simulations</source>
        <translation>zahrnout SPICE simulace</translation>
    </message>
    <message>
        <location line="+323"/>
        <source>Converting SPICE file &quot;%1&quot;.</source>
        <translation>Převod SPICE souboru &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="-313"/>
        <source>preprocessor</source>
        <translation></translation>
    </message>
    <message>
        <location line="+254"/>
        <source>Preprocessing SPICE file &quot;%1&quot;.</source>
        <translation>Předzpracování SPICE souboru &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+43"/>
        <source>SPICE Preprocessor Error</source>
        <translation>Chyba SPICE preprocesoru</translation>
    </message>
    <message>
        <location line="-30"/>
        <source>Cannot save preprocessed SPICE file &quot;%1&quot;.</source>
        <translation>Nelze uložit předzpracovaný SPICE soubor &quot;%1&quot;.</translation>
    </message>
    <message>
        <location line="+10"/>
        <location line="+48"/>
        <source>Cannot execute &quot;%1&quot;.</source>
        <translation>Nelze spustit &quot;%1&quot;.</translation>
    </message>
</context>
<context>
    <name>SweepDialog</name>
    <message>
        <location filename="dialogs/sweepdialog.cpp" line="+80"/>
        <source>Bias Points</source>
        <translation>Pracovní body</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>Close</source>
        <translation>Uzavřít</translation>
    </message>
</context>
<context>
    <name>SymbolWidget</name>
    <message>
        <location filename="../qucs-lib/symbolwidget.cpp" line="+45"/>
        <source>Symbol:</source>
        <translation>Symbol:</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>! Drag n&apos;Drop me !</source>
        <translation>! Chytni mě a přesuň !</translation>
    </message>
</context>
<context>
    <name>TextDoc</name>
    <message>
        <source>Error</source>
        <translation type="obsolete">Chyba</translation>
    </message>
    <message>
        <source>There is no selection!</source>
        <translation type="obsolete">Není zde žádný výběr!</translation>
    </message>
    <message>
        <source>Page %1 of %2</source>
        <translation type="obsolete">Stránka %1 z %2</translation>
    </message>
    <message>
        <location filename="textdoc.cpp" line="+178"/>
        <source>Edit Text Symbol</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Edits the symbol for this text document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Edit Text Symbol

Edits the symbol for this text document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+3"/>
        <source>VHDL entity</source>
        <translation type="unfinished">VHDL entita</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts skeleton of VHDL entity</source>
        <translation type="unfinished">Vloží konstrukci VHDL entity</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>VHDL entity

Inserts the skeleton of a VHDL entity</source>
        <translation type="unfinished">VHDL entita

Vloží konstrukci VHDL entity</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Verilog module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts skeleton of Verilog module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Verilog module

Inserts the skeleton of a Verilog module</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Octave function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts skeleton of Octave function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Octave function

Inserts the skeleton of a Octave function</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>VASettingsDialog</name>
    <message>
        <location filename="dialogs/vasettingsdialog.cpp" line="+43"/>
        <source>Document Settings</source>
        <translation type="unfinished">Nastavení dokumentu</translation>
    </message>
    <message>
        <source>Simulation</source>
        <translation type="obsolete">Simulace</translation>
    </message>
    <message>
        <source>Duration of Simulation:</source>
        <translation type="obsolete">Doba trvání simulace:</translation>
    </message>
    <message>
        <source>Library Name:</source>
        <translation type="obsolete">Jméno knihovny:</translation>
    </message>
    <message>
        <location line="+107"/>
        <source>Ok</source>
        <translation type="unfinished">Ok</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="-100"/>
        <source>Code Creation Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Browse</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Output file:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Recreate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Icon description:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Description:</source>
        <translation type="unfinished">Popis:</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>unspecified device</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>NPN/PNP polarity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>NMOS/PMOS polarity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+16"/>
        <source>analog only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>digital only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>both</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+77"/>
        <source>PNG files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Any file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Enter an Icon File Name</source>
        <translation type="unfinished"></translation>
    </message>
</context>
</TS>