c/libjpeg-turbo
1
0
Fork 0
mirror of https://github.com/libjpeg-turbo/libjpeg-turbo synced 2025-03-28 21:13:18 +00:00
Code Issues Packages Projects Releases Wiki Activity
libjpeg-turbo/tjbenchtest.in

446 lines
20 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
set -u
set -e
trap onexit INT
trap onexit TERM
trap onexit EXIT
onexit()
{
if [ -d $OUTDIR ]; then
rm -rf $OUTDIR
fi
}
runme()
{
echo \*\*\* $*
"$@"
}
EXT=bmp
IMAGES="vgl_5674_0098.${EXT} vgl_6434_0018a.${EXT} vgl_6548_0026a.${EXT} big_tree8.${EXT}"
IMGDIR=@CMAKE_CURRENT_SOURCE_DIR@/testimages
OUTDIR=`mktemp -d /tmp/__tjbenchtest_output.XXXXXX`
EXEDIR=@CMAKE_CURRENT_BINARY_DIR@
JAVA="@Java_JAVA_EXECUTABLE@"
JAVAARGS="-cp $EXEDIR/java/turbojpeg.jar -Djava.library.path=$EXEDIR"
TJBENCH=$EXEDIR/tjbench
BMPARG=
NSARG=
YUVARG=
ALLOC=0
ALLOCARG=
ENTROPYARG=
JAVAARG=
LOSSLSARG=
LOSSLSPSV=
TJQUAL=95
x1SUBSAMP="444 GRAY"
x24SUBSAMP="422 440 420 411 441"
ALLSUBSAMP="444 422 440 420 411 441 GRAY"
PRECISION=8
if [ "$EXT" = "bmp" ]; then BMPARG=-bmp; fi
if [ -d $OUTDIR ]; then
rm -rf $OUTDIR
fi
mkdir -p $OUTDIR
while [ $# -gt 0 ]; do
case "$1" in
-yuv)
NSARG=-nosmooth
YUVARG=-yuv
# NOTE: The combination of tj3EncodeYUV*() and tj3CompressFromYUV*() does not
# always produce bitwise-identical results to tj3Compress*() if subsampling is
# enabled. In both cases, if the image width or height are not evenly
# divisible by the MCU width/height, then the bottom and/or right edge are
# expanded. However, the libjpeg code performs this expansion prior to
# downsampling, and TurboJPEG performs it in tj3CompressFromYUV*(), which is
# after downsampling. Thus, the two will agree only if the width/height along
# each downsampled dimension is an odd number or is evenly divisible by the MCU
# width/height. This disagreement basically amounts to a round-off error, but
# there is no easy way around it, so for now, we just test the only image that
# works. (NOTE: big_tree8 does not suffer from the above issue, but it suffers
# from an unrelated problem whereby the combination of tj3DecompressToYUV*()
# and tj3DecodeYUV*() do not produce bitwise-identical results to
# tj3Decompress*() if decompression scaling is enabled. This latter phenomenon
# is not yet fully understood but is also believed to be some sort of round-off
# error.)
IMAGES="vgl_6548_0026a.${EXT}"
;;
-alloc)
ALLOCARG=-alloc
ALLOC=1
;;
-java)
JAVAARG=-java
TJBENCH="$JAVA $JAVAARGS TJBench"
;;
-optimize)
ENTROPYARG=-optimize
;;
-progressive)
if [ "$ENTROPYARG" = "-arithmetic" ]; then
ENTROPYARG=-progressive-arithmetic
else
ENTROPYARG=-progressive
fi
;;
-arithmetic)
if [ "$ENTROPYARG" = "-progressive" ]; then
ENTROPYARG=-progressive-arithmetic
else
ENTROPYARG=-arithmetic
fi
;;
-lossless)
LOSSLSARG="-lossless"
LOSSLSPSV=4
TJQUAL=4
x1SUBSAMP=444
x24SUBSAMP=444
ALLSUBSAMP=444
;;
-precision)
shift
PRECISION=$1
if [ $PRECISION != 8 ]; then
EXT=ppm
IMAGES="big_building16.${EXT}"
BMPARG=
fi
;;
esac
shift
done
if [ $PRECISION = 8 -a "$YUVARG" = "" ]; then
if [ "$ENTROPYARG" = "-optimize" ]; then
IMAGES="vgl_6434_0018a.${EXT}"
elif [ "$ENTROPYARG" = "-progressive" ]; then
IMAGES="vgl_6548_0026a.${EXT}"
elif [ "$ENTROPYARG" = "-arithmetic" -o \
"$ENTROPYARG" = "-progressive-arithmetic" ]; then
IMAGES="big_tree8.${EXT}"
fi
fi
exec >$EXEDIR/tjbenchtest$JAVAARG$YUVARG$ALLOCARG$ENTROPYARG$LOSSLSARG-$PRECISION.log
if [ "$ENTROPYARG" = "-progressive-arithmetic" ]; then
ENTROPYARG="-progressive -arithmetic"
fi
# Standard tests
for image in $IMAGES; do
cp $IMGDIR/$image $OUTDIR
basename=`basename $image .${EXT}`
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct fast $ENTROPYARG $LOSSLSARG $LOSSLSPSV -grayscale -outfile $OUTDIR/${basename}_GRAY_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct fast $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 1x4 -outfile $OUTDIR/${basename}_441_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct fast $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 4x1 -outfile $OUTDIR/${basename}_411_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct fast $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 2x2 -outfile $OUTDIR/${basename}_420_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct fast $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 1x2 -outfile $OUTDIR/${basename}_440_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct fast $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 2x1 -outfile $OUTDIR/${basename}_422_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct fast $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 1x1 -outfile $OUTDIR/${basename}_444_fast_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct int $ENTROPYARG $LOSSLSARG $LOSSLSPSV -grayscale -outfile $OUTDIR/${basename}_GRAY_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct int $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 1x4 -outfile $OUTDIR/${basename}_441_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct int $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 4x1 -outfile $OUTDIR/${basename}_411_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct int $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 2x2 -outfile $OUTDIR/${basename}_420_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct int $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 1x2 -outfile $OUTDIR/${basename}_440_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct int $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 2x1 -outfile $OUTDIR/${basename}_422_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
runme $EXEDIR/cjpeg -quality 95 -precision $PRECISION -dct int $ENTROPYARG $LOSSLSARG $LOSSLSPSV -sample 1x1 -outfile $OUTDIR/${basename}_444_accurate_cjpeg.jpg $IMGDIR/${basename}.${EXT}
for samp in $ALLSUBSAMP; do
runme $EXEDIR/djpeg -dct fast -rgb $NSARG $BMPARG -outfile $OUTDIR/${basename}_${samp}_fast_djpeg.${EXT} $OUTDIR/${basename}_${samp}_fast_cjpeg.jpg
runme $EXEDIR/djpeg -dct int -rgb $NSARG $BMPARG -outfile $OUTDIR/${basename}_${samp}_accurate_djpeg.${EXT} $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
done
for samp in $x24SUBSAMP; do
runme $EXEDIR/djpeg -dct fast -nosmooth $BMPARG -outfile $OUTDIR/${basename}_${samp}_fast_nosmooth_djpeg.${EXT} $OUTDIR/${basename}_${samp}_fast_cjpeg.jpg
runme $EXEDIR/djpeg -dct int -nosmooth $BMPARG -outfile $OUTDIR/${basename}_${samp}_accurate_nosmooth_djpeg.${EXT} $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
done
# Compression
for dct in accurate fast; do
dctarg=
if [ "${dct}" = "fast" ]; then
dctarg=-fastdct
fi
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -rgb -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
if [ "$LOSSLSARG" != "-lossless" ]; then
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -subsamp 440 -rgb -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -subsamp 411 -rgb -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -subsamp 441 -rgb -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
fi
for samp in $ALLSUBSAMP; do
if [ "$LOSSLSARG" = "-lossless" ]; then
runme cmp $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}.jpg $OUTDIR/${basename}_${samp}_${dct}_cjpeg.jpg
else
runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg $OUTDIR/${basename}_${samp}_${dct}_cjpeg.jpg
fi
done
done
for dct in fast accurate; do
dctarg=
if [ "${dct}" = "fast" ]; then
dctarg=-fastdct
fi
# Tiled compression & decompression
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -rgb -tile -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
for samp in $x1SUBSAMP; do
if [ $ALLOC = 1 ]; then
if [ "$LOSSLSARG" = "-lossless" ]; then
runme cmp $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
rm $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT}
else
runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT}
fi
else
if [ "$LOSSLSARG" = "-lossless" ]; then
for i in $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT}; do
runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
rm $i
done
else
for i in $OUTDIR/${basename}_${samp}_Q${TJQUAL}_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT}; do
runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
rm $i
done
fi
fi
done
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -rgb -tile -quiet -benchtime 0.01 -warmup 0 -fastupsample ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
if [ "$LOSSLSARG" != "-lossless" ]; then
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -subsamp 440 -rgb -tile -quiet -benchtime 0.01 -warmup 0 -fastupsample ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -subsamp 411 -rgb -tile -quiet -benchtime 0.01 -warmup 0 -fastupsample ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme $TJBENCH $OUTDIR/$image $TJQUAL -precision $PRECISION -subsamp 441 -rgb -tile -quiet -benchtime 0.01 -warmup 0 -fastupsample ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
fi
for samp in $x24SUBSAMP; do
if [ $ALLOC = 1 ]; then
if [ "$LOSSLSARG" = "-lossless" ]; then
runme cmp $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
rm $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT}
else
runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT}
fi
else
if [ "$LOSSLSARG" = "-lossless" ]; then
for i in $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_full.${EXT}; do
runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
rm $i
done
else
for i in $OUTDIR/${basename}_${samp}_Q${TJQUAL}_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.${EXT}; do
# If the tile size is smaller than the MCU size, then there will be
# edge artifacts at the tile boundaries, so the decompressed image
# will not be identical to the untiled decompressed image.
TILESIZE=$(basename $(echo $i | sed 's/.*_//g') .${EXT})
if [ "$TILESIZE" = "8x8" ]; then
continue
fi
if [ "$TILESIZE" = "16x16" -a \
\( "${samp}" = "411" -o "${samp}" = "441" \) ]; then
continue
fi
runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
rm $i
done
fi
fi
done
# Tiled decompression
if [ "$LOSSLSARG" != "-lossless" ]; then
for samp in $x1SUBSAMP; do
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG -tile -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG
if [ $ALLOC = 1 ]; then
runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
else
for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_djpeg.${EXT}
rm $i
done
fi
done
for samp in $x24SUBSAMP; do
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG -tile -quiet -benchtime 0.01 -warmup 0 -fastupsample ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG
if [ $ALLOC = 1 ]; then
runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
else
for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
TILESIZE=$(basename $(echo $i | sed 's/.*_//g') .${EXT})
if [ "$TILESIZE" = "8x8" ]; then
continue
fi
if [ "$TILESIZE" = "16x16" -a \
\( "${samp}" = "411" -o "${samp}" = "441" \) ]; then
continue
fi
runme cmp $i $OUTDIR/${basename}_${samp}_${dct}_nosmooth_djpeg.${EXT}
rm $i
done
fi
done
fi
done
# Partial decompression
if [ "$LOSSLSARG" != "-lossless" -a "$YUVARG" != "-yuv" ]; then
for samp in $ALLSUBSAMP; do
CROPW8_8=103
CROPL8_8=16
CROPW7_8=91
CROPL7_8=14
if [ "${samp}" = "411" ]; then
CROPW8_8=87
CROPL8_8=32
CROPW7_8=77
CROPL7_8=28
fi
runme $EXEDIR/djpeg -rgb -crop ${CROPW8_8}x90+${CROPL8_8}+5 $NSARG -outfile $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg -crop ${CROPW8_8}x90+${CROPL8_8}+5 -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_full.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
runme $EXEDIR/djpeg -rgb -scale 7/8 -crop ${CROPW7_8}x81+${CROPL7_8}+3 $NSARG -outfile $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg -scale 7/8 -crop ${CROPW7_8}x81+${CROPL7_8}+3 -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_7_8.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_7_8.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
runme $EXEDIR/djpeg -rgb -scale 1/2 -crop 40x40+0+0 $NSARG -outfile $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg -scale 1/2 -crop 40x40+0+0 -quiet -benchtime 0.01 -warmup 0 ${dctarg} $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_1_2.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_1_2.ppm $OUTDIR/${basename}_${samp}_scale_crop_djpeg.ppm
done
fi
# Scaled decompression
for scale in 2_1 15_8 7_4 13_8 3_2 11_8 5_4 9_8 7_8 3_4 5_8 1_2 3_8 1_4 1_8; do
scalearg=`echo $scale | sed 's/\_/\//g'`
SCALE=$scale
if [ "$LOSSLSARG" = "-lossless" ]; then
SCALE=full
fi
for samp in $ALLSUBSAMP; do
runme $EXEDIR/djpeg -rgb -scale ${scalearg} $NSARG $BMPARG -outfile $OUTDIR/${basename}_${samp}_${scale}_djpeg.${EXT} $OUTDIR/${basename}_${samp}_accurate_cjpeg.jpg
if [ "$LOSSLSARG" = "-lossless" ]; then
runme $TJBENCH $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}.jpg $BMPARG -scale ${scalearg} -quiet -benchtime 0.01 -warmup 0 $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme cmp $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_${SCALE}.${EXT} $OUTDIR/${basename}_${samp}_${scale}_djpeg.${EXT}
rm $OUTDIR/${basename}_LOSSLS_PSV${TJQUAL}_${SCALE}.${EXT}
else
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q${TJQUAL}.jpg $BMPARG -scale ${scalearg} -quiet -benchtime 0.01 -warmup 0 $YUVARG $ALLOCARG $ENTROPYARG $LOSSLSARG
runme cmp $OUTDIR/${basename}_${samp}_Q${TJQUAL}_${SCALE}.${EXT} $OUTDIR/${basename}_${samp}_${scale}_djpeg.${EXT}
rm $OUTDIR/${basename}_${samp}_Q${TJQUAL}_${SCALE}.${EXT}
fi
done
done
# Transforms
if [ "$LOSSLSARG" != "-lossless" ]; then
for samp in $ALLSUBSAMP; do
runme $EXEDIR/jpegtran -flip horizontal -trim -outfile $OUTDIR/${basename}_${samp}_hflip_jpegtran.jpg $OUTDIR/${basename}_${samp}_Q95.jpg
runme $EXEDIR/jpegtran -flip vertical -trim -outfile $OUTDIR/${basename}_${samp}_vflip_jpegtran.jpg $OUTDIR/${basename}_${samp}_Q95.jpg
runme $EXEDIR/jpegtran -transpose -trim -outfile $OUTDIR/${basename}_${samp}_transpose_jpegtran.jpg $OUTDIR/${basename}_${samp}_Q95.jpg
runme $EXEDIR/jpegtran -transverse -trim -outfile $OUTDIR/${basename}_${samp}_transverse_jpegtran.jpg $OUTDIR/${basename}_${samp}_Q95.jpg
runme $EXEDIR/jpegtran -rotate 90 -trim -outfile $OUTDIR/${basename}_${samp}_rot90_jpegtran.jpg $OUTDIR/${basename}_${samp}_Q95.jpg
runme $EXEDIR/jpegtran -rotate 180 -trim -outfile $OUTDIR/${basename}_${samp}_rot180_jpegtran.jpg $OUTDIR/${basename}_${samp}_Q95.jpg
runme $EXEDIR/jpegtran -rotate 270 -trim -outfile $OUTDIR/${basename}_${samp}_rot270_jpegtran.jpg $OUTDIR/${basename}_${samp}_Q95.jpg
done
for xform in hflip vflip transpose transverse rot90 rot180 rot270; do
for samp in $x1SUBSAMP; do
runme $EXEDIR/djpeg -rgb $BMPARG -outfile $OUTDIR/${basename}_${samp}_${xform}_jpegtran.${EXT} $OUTDIR/${basename}_${samp}_${xform}_jpegtran.jpg
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG -$xform -tile -quiet -benchtime 0.01 -warmup 0 $YUVARG $ALLOCARG $ENTROPYARG
if [ $ALLOC = 1 ]; then
runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_${samp}_${xform}_jpegtran.${EXT}
rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
else
for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
runme cmp $i $OUTDIR/${basename}_${samp}_${xform}_jpegtran.${EXT}
rm $i
done
fi
done
for samp in $x24SUBSAMP; do
runme $EXEDIR/djpeg -nosmooth -rgb $BMPARG -outfile $OUTDIR/${basename}_${samp}_${xform}_jpegtran.${EXT} $OUTDIR/${basename}_${samp}_${xform}_jpegtran.jpg
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG -$xform -tile -quiet -benchtime 0.01 -warmup 0 -fastupsample $YUVARG $ALLOCARG $ENTROPYARG
if [ $ALLOC = 1 ]; then
runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_${samp}_${xform}_jpegtran.${EXT}
rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
else
for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
TILESIZE=$(basename $(echo $i | sed 's/.*_//g') .${EXT})
if [ "$TILESIZE" = "8x8" ]; then
continue
fi
if [ "$TILESIZE" = "16x16" -a \
\( "${samp}" = "411" -o "${samp}" = "441" \) ]; then
continue
fi
runme cmp $i $OUTDIR/${basename}_${samp}_${xform}_jpegtran.${EXT}
rm $i
done
fi
done
done
# Grayscale transform
for xform in hflip vflip transpose transverse rot90 rot180 rot270; do
for samp in $ALLSUBSAMP; do
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG -$xform -tile -quiet -benchtime 0.01 -warmup 0 -grayscale $YUVARG $ALLOCARG $ENTROPYARG
if [ $ALLOC = 1 ]; then
runme cmp $OUTDIR/${basename}_${samp}_Q95_full.${EXT} $OUTDIR/${basename}_GRAY_${xform}_jpegtran.${EXT}
rm $OUTDIR/${basename}_${samp}_Q95_full.${EXT}
else
for i in $OUTDIR/${basename}_${samp}_Q95_[0-9]*x[0-9]*.${EXT} \
$OUTDIR/${basename}_${samp}_Q95_full.${EXT}; do
TILESIZE=$(basename $(echo $i | sed 's/.*_//g') .${EXT})
if [ "$TILESIZE" = "8x8" -a \
"${samp}" != "444" -a "${samp}" != "GRAY" ]; then
continue
fi
if [ "$TILESIZE" = "16x16" -a \
\( "${samp}" = "411" -o "${samp}" = "441" \) ]; then
continue
fi
runme cmp $i $OUTDIR/${basename}_GRAY_${xform}_jpegtran.${EXT}
rm $i
done
fi
done
done
# Transforms with scaling
for xform in hflip vflip transpose transverse rot90 rot180 rot270; do
for samp in $ALLSUBSAMP; do
for scale in 2_1 15_8 7_4 13_8 3_2 11_8 5_4 9_8 7_8 3_4 5_8 1_2 3_8 1_4 1_8; do
scalearg=`echo $scale | sed 's/\_/\//g'`
runme $EXEDIR/djpeg -rgb -scale ${scalearg} $NSARG $BMPARG -outfile $OUTDIR/${basename}_${samp}_${xform}_${scale}_jpegtran.${EXT} $OUTDIR/${basename}_${samp}_${xform}_jpegtran.jpg
runme $TJBENCH $OUTDIR/${basename}_${samp}_Q95.jpg $BMPARG -$xform -scale ${scalearg} -quiet -benchtime 0.01 -warmup 0 $YUVARG $ALLOCARG $ENTROPYARG
runme cmp $OUTDIR/${basename}_${samp}_Q95_${scale}.${EXT} $OUTDIR/${basename}_${samp}_${xform}_${scale}_jpegtran.${EXT}
rm $OUTDIR/${basename}_${samp}_Q95_${scale}.${EXT}
done
done
done
fi
done
echo SUCCESS!
Reference in New Issue View Git Blame Copy Permalink