Switch from old-style ASSERT macro to new-style ASSERT_EQ,... macros.
Using new-style macros makes it easier to debug test failures
Fixes: https://github.com/libuv/libuv/issues/2974
Don't use a static buffer to hold human-readable "big" numbers.
The buffer isn't big enough for benchmarks like fs_stat that print a
large number of them. Have the caller pass in a buffer instead.
Pass the loop to MAKE_VALGRIND_HAPPY() so it's explicit on which loop
needs to be cleaned up. Since it asserts on uv_loop_close(), need to
remove a couple of those that were being done before the call.
Cleanup where loop was assigned, so the entire test either uses loop or
uv_default_loop(). Not both.
Also take care of any reqs that may have been left uncleaned.
So `WaitNamedPipe()` doesn't fail. Increase the number of clients in
`pipe_connect_multiple` so `CreateFile()` returns `ERROR_PIPE_BUSY` and
the codepath leading to `WaitNamedPipe()` is exercised.
Backported thread affinity feature and related dependency commits
from master. It will add support for those APIs: uv_cpumask_size,
uv_thread_setaffinity, uv_thread_getaffinity.
The supported platforms are Linux, Freebsd, and Windows.
Empty implementations (returning UV_ENOTSUP) on non-supported platforms
(such as OS X and AIX).
Previously they were just being run incorrectly, but nothing wrong with
the test itself. We were also interpreting an ASAN failure as TEST_SKIP,
so test failures would not actually be reported as CI failures.
To properly handle sending UDP packet to unreachable address.
PR-URL: https://github.com/libuv/libuv/pull/2872
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
`uv_fs_utime()` and `uv_fs_futime()` receive the timestamp as
a `double` and then convert it to `struct timeval` or `struct timespec`
where necessary but the calculation for the sub-second part exhibited
rounding errors for dates in the deep past or the far-flung future,
causing the timestamps to be off by sometimes over half a second on
unix, or to be reinterpreted as unsigned and end up off by more than
just sign but many also decades.
Fixes: https://github.com/nodejs/node/issues/32369 (partially)
PR-URL: https://github.com/libuv/libuv/pull/2747
Co-authored-by: Jameson Nash <vtjnash@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Passing expression as an argument to a function-like macro will replace
all occurrence of the arguments with expressions during preprocessing.
This result in multiple evaluation of the same expression and can
slow-down the program or even change program state. Here ASSERT_BASE
macro gets an expression involving a and b as first argument and macro
definition has a print statement with a and b, which means there is
double evaluation of a and b when the expression evaluates to false. To
avoid double evaluation temporary variables are created to store results
of a and b.
Since the expression argument is dropped from ASSERT_BASE, the macro no
longer works for string assertions. So a new macro, ASSERT_BASE_STR, is
introduced to deal with strings. ASSERT_BASE can still work with
pointers.
Fixes: https://github.com/libuv/libuv/issues/2916
PR-URL: https://github.com/libuv/libuv/pull/2926
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Make it possible to explicitly tell libuv to release any resources
it's still holding onto (memory, threads, file descriptors, etc.)
Before this commit, cleanup was performed in various destructors.
This commit centralizes the cleanup logic, enabling the addition of
`uv_library_shutdown()`, but maintains the current observable behavior
of cleaning up when libuv is unloaded by means of `dlclose(3)`.
Fixes: https://github.com/libuv/libuv/issues/2763
PR-URL: https://github.com/libuv/libuv/pull/2764
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
To make the debugging of test issues easier.
The following integer macros are added:
`ASSERT_EQ(a, b)`, `ASSERT_GE(a, b)`, `ASSERT_GT(a, b)`,
`ASSERT_LE(a, b)`, `ASSERT_LT(a, b)` and `ASSERT_NE(a, b)`.
And its corresponding unsigned integer macros:
`ASSERT_UINT64_EQ(a, b)`, `ASSERT_UINT64_GE(a, b)`,
`ASSERT_UINT64_GT(a, b)`, `ASSERT_UINT64_LE(a, b)`,
`ASSERT_UINT64_LT(a, b)` and `ASSERT_UINT64_NE(a, b)`.
Also these macros for `NULL` and pointer checks:
`ASSERT_NULL(a)`, `ASSERT_NOT_NULL(a)`, `ASSERT_PTR_EQ(a, b)` and
`ASSERT_PTR_NE(a, b)`.
And finally these macros for strings and buffers:
`ASSERT_STR_EQ(a, b)`/`ASSERT_STR_NEQ(a, b)` that use the `strcmp()`
call.
`ASSERT_MEM_EQ(a, b)`/`ASSERT_MEM_NEQ(a, b)` and
`ASSERT_MEM_HEX_EQ(a, b)`/`ASSERT_MEM_HEX_NEQ(a, b)` that use the
`memcmp()` call. The former, prints the data in string format and the
latter in hex format.
These macros are used in the following way:
```c
ASSERT_EQ(UV_EINVAL, uv_loop_close(&loop));
```
With a sample output that would be as follows:
```
Assertion failed in test/test-loop-close.c on line 44: `UV_EINVAL == uv_loop_close(&loop)` (-22 == -16)
```
To view multiples examples if their use, the `test-ipc.c` file has been
modified to use these macros.
The `_ISOC99_SOURCE` is defined to support `inttypes.h` in `z/OS`.
PR-URL: https://github.com/libuv/libuv/pull/2739
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
On IBMi, uv_uptime() and uv_fs_event_init() return UV_ENOSYS.
Set NO_FS_EVENTS on IBMi.
PR-URL: https://github.com/libuv/libuv/pull/2573
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
This commit exposes the uv_sleep() function that previously
only existed in the test runner.
PR-URL: https://github.com/libuv/libuv/pull/2548
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
In test-ipc.c, remove unnecessarily casting uv_stream_s to
uv_pipe_s that makes gcc complain about stric-aliasing
(-Wstrict-aliasing).
In test-queue-foreach-delete.c, using C99 variadic macros
to fix a gcc 8 warnings (-Wcast-function-type).
PR-URL: https://github.com/libuv/libuv/pull/2344
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The test runner inserted a 250 ms delay to give helper processes time to
settle. That's intrinsically race-y and caused tests to intermittently
fail on platforms like AIX.
Instead of a fixed delay, pass a file descriptor to the helper process
and wait until it closes the descriptor. That way we know for sure the
process has started.
Incidentally, this change reduces the running time of the test suite
from 112 to 26 seconds on my machine.
Fixes: https://github.com/libuv/libuv/issues/2041
PR-URL: https://github.com/libuv/libuv/pull/2056
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
This commit uses the Register File Interest feature on z/OS
to enable users to monitor file system events.
The poll call is used to check for file descriptors as well
as a message queue that z/OS will report file system events
on. The last item on the list used by poll will contain the
message queue id instead of a file descriptor.
Limitation:
Writes to a directory (that is, file creation and deletion)
do not generate a change message for a registered directory.
PR-URL: https://github.com/libuv/libuv/pull/1311
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The cygwin runtime library fails to connect a socket client to a
listening server within the same thread. Test cases that use
this approach hang while waiting for the connection to complete.
This can be reproduced independent of libuv in a simple example
using both socket/bind/listen and socket/connect in a single
thread.
Avoid this problem in our test suite by skipping such tests on cygwin.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On Cygwin `recvmsg` always sets `msg_controllen` to zero on a
message received from a named pipe. Therefore we cannot use
`sendmsg` to send handles for ipc. Return failure early from
this code path as `ENOSYS`.
Skip tests requiring this feature since it is not available.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Cygwin and MSYS2 are POSIX layers implemented on top of Windows.
Use our POSIX `poll(2)` implementation of our poll abstraction.
For most other components we already have dedicated sources
implementing them in terms of APIs available on Cygwin or
providing non-implementations of components not supported.
This leaves only three components that need Cygwin-specific
implementations:
* uv_uptime: implement using sysinfo
* uv_resident_set_memory: add a placeholder returning UV_ENOSYS
* uv_cpu_info: add a placeholder returning UV_ENOSYS
Update our test suite to account for features not available
due to Cygwin platform limitations or our placeholders.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Factor out a dedicated test macro for use on platforms that
do not support fsevents instead of duplicating the os390
platform condition and explanation text.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On Windows the pipe implementation could read more from a stream than
was available and it would create an assertion failure. This change
will make it so we read the minimum of the available data or the length
of the data.
To test this, I took the existing ipc_send_recv_tcp test and updated it
to do two writes and two read on each side of the pipe since that was the
reproduction recipe used by the reporter. This approach reproduced the
issue on Windows and the committed fix resolved the issue.
Fixes: https://github.com/libuv/libuv/issues/505
PR-URL: https://github.com/libuv/libuv/pull/549
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Prior to MSVC 2015, the standard C99 `inline` keyword was missing,
added a compiler version check and disabled the inline replacement for
MSVC >= 2015 in test/task.h.
Refs: https://github.com/libuv/libuv/pull/341
PR-URL: https://github.com/libuv/libuv/pull/369
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Prior to MSVC 2015, there was no standard compliant snprintf(), added a
compiler version check and disabled the snprintf() replacement for MSVC >=
2015 in test/task.h.
PR-URL: https://github.com/libuv/libuv/pull/341
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
The MSVC compiler does not accept static methods defined in headers,
when linking against a shared library. The snprintf replacement
function used for windows, is now an inline function.
PR-URL: https://github.com/libuv/libuv/pull/329
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Should fix the build after 96f32a2 inadvertently broke it.
There is no snprintf() on Windows because, hey, it's a C99 addition
and the people from Redmond, WA are still firmly stuck in 1989.
Switch to the build tool everyone loves to hate. The Makefile has
served us well over the years but it's been acquiring more and more
features that autotools gives us for free, like easy static+shared
library building, sane install targets, and so on.
This commit drops MinGW support. If there is demand for it, we'll
re-add it.
They're BSD-isms and obsolete ones at that. Replace with S_IRUSR and
S_IWUSR. Alias as _S_IREAD and _S_IWRITE on Windows because the '90s
never ended in Redmond, WA.
Added two new flags to identify tests that are intentionally ignored
(usually because we don't want to implement the tested functionality
on current platform) and test serving as TODO list (usually indicating
that the tested functionality should be implemented on current plaform
in the near future.)
Replace `void f()` with `void f(void)`; the former means "a function
that takes any number of arguments, including none" while the latter
is what is actually intended: a function taking no arguments.
The first form also isn't strictly conforming ANSI/ISO C.
